SAFC Commercial Adds Continuous Flow Capacity

May 20, 2014
Sigma-Aldrich custom manufacturing services installs new reactors at Sheboygan and Milwaukee facilities.

Sigma-Aldrich Corporation announced that SAFC Commercial, its custom manufacturing services business unit, has installed a new commercial-scale continuous flow reactor at its Sheboygan, Wis., facility with capacity to produce up to 150 kg of product per day. Fully operational, the reactor is complemented by a smaller pilot-scale continuous flow reactor being fabricated at the nearby Milwaukee, Wis., facility to carry out process optimization studies and manufacturing capability of up to 30 kg of product per day.

The continuous flow reactor in Sheboygan, Wis., is currently online and SAFC is taking inquiries. Both reactors are supported by a multitude of research reactors located in the US and EU that provide support to customers from research to commercialization.

For more information, visit:

Sponsored Recommendations

Heat Recovery: Turning Air Compressors into an Energy Source

More than just providing plant air, they're also a useful source of heat, energy savings, and sustainable operations.

Controls for Industrial Compressed Air Systems

Master controllers leverage the advantages of each type of compressor control and take air system operations and efficiency to new heights.

Discover Your Savings Potential with the Kaeser Toolbox

Discover your compressed air station savings potential today with our toolbox full of calculators that will help you determine how you can optimize your system!

The Art of Dryer Sizing

Read how to size compressed air dryers with these tips and simple calculations and correction factors from air system specialists.