Exair

Spray nozzles positively stop liquid flow when compressed air is shut off.

Cabinet Cooler Systems keep electrical enclosures cool with 20 degree F (-7 degrees C) air while maintaining the NEMA 4X rating of the enclosure and removing heat that could adversely...

Nozzles positively stop liquid flow when compressed air is shut off.

Nozzles mix liquid and air inside the nozzle to produce fine atomization of liquids up to 300 centipoise.

Exair's new Hazardous Location Cabinet Cooler Systems achieve the UL classified designation for Div1 environments.

Exair’s new Soft Grip Back Blow Safety Air Gun uses a small back blow nozzle to deliver a blast of air to effectively blow debris and liquids from inside small pipe or hose diameters...

Exair’s new Gen4 Super Ion Air Wipe removes dust, particulates and personnel shocks on pipe, cable, extruded shapes, hose and wire.

External mix nozzles are used when a high volume of liquid is needed.

Exair’s new Sanitary Flange Line Vac air operated conveyors convey materials through systems that require frequent or mandatory cleaning.

Exair's new VariBlast Compact Safety Air Guns are a small and lightweight cast aluminum air gun capable of handling tough jobs.

It eliminates static on plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem.

Exair's 1/2 NPT internal mix, 360-degree, hollow circular pattern atomizing spray nozzle atomizes fluid and sprays away from the nozzle in all directions, up to 13 feet in diameter...

Nozzle atomizes fluid and sprays away from the nozzle in all directions.

Digital Flowmeters with wireless capability use a Zigbee mesh network protocol to measure and monitor compressed air use, trends and historical data.

Siphon fed atomizing spray nozzle atomizes a variety of fluids in a round spray pattern where no liquid pressure is available and heavy application of liquid is needed.

Exair adds smaller and larger sizes to the air operated 316 Stainless Steel Threaded Line Vac conveyor product line, which convert ordinary pipe into an in-line conveying system...

Ion Air Jet removes static electricity, contaminants and dust from parts prior to shrink wrapping, packaging, printing, painting or finishing.

Nozzle allows spray to be placed precisely where it is needed when the mounting and work areas are limited.

Exair’s 303 stainless steel Threaded Line Vac Air Operated Conveyors convert ordinary pipe into a conveying system for bulk materials.

Internal mix spray nozzles atomize fluids in a range of spray patterns and liquid volumes.

External Mix Atomizing Spray Nozzles mix liquid and air outside the nozzle and allow the air and liquid flows to be adjusted independently.

Exair’s new aluminum 3/8 NPT and 1/2 NPT Threaded Line Vac Air Operated Conveyors convert ordinary pipe into a conveying system for parts, scrap, trim and other bulk materials...

System keeps electrical enclosures cool while minimizing compressed air use.

The nozzles are suitable for applications where no post-spray drip is permissible.

EXAIR’s no-drip internal mix atomizing nozzles mix liquid and air inside the nozzle to produce the fine atomization of liquids up to 300 centipoise.

Profile of the electrically powered ionizing bar is compact, allowing it to fit in the confined spaces of machinery.

Nozzle design makes it suitable for tight spaces.

316 stainless-steel construction is suitable for blowoff, cooling and drying applications located in general industrial, high temperature, food, pharmaceutical or corrosive environments...

System cleans dry materials from industrial surfaces.

New model delivers compressed air in a concentrated, high-velocity stream.

The ETC maintains a constant temperature in the electrical enclosure that is slightly under the maximum rating of the electronics.