Integrated System Improves Operations

Combined process control and safety system cuts costs and boosts efficiency

By Odel Protti, Atanor

1 of 2 < 1 | 2 View on one page

Atanor ( is one of the largest Argentine producers of hydrogen peroxide. Our Rio Tercero plant in Cordoba province began operations in 1949 and currently employs about 300 people. In addition to hydrogen peroxide, the Rio Tercero plant produces chlorhydric acid, chlorine, caustic soda, acetic acid and 2,4-dichlorophenoxyacetic acid.

In October 2005, we started up a new hydrogen peroxide unit called A.O.A. II, there. This should eventually increase our production capacity to 14,200 metric tons/yr., enough to cover Argentina’s total domestic demand. Any surplus will be exported to neighboring countries. The A.O.A. II plant produces hydrogen peroxide, our end product; the Cloro Soda I plant safely handles hydrogen, the main raw material used in our process.


Figure 1. Operator discusses hydrogen peroxide unit with author (standing on right).

For the A.O.A. II unit we wanted to integrate the basic process control system (BPCS) and the safety instrumented system (SIS) because we believed this would offer both financial and operational advantages. We selected a System 800xA from ABB. That company’s track record with projects at other Atanor sites greatly influenced our decision. We began working with ABB almost 20 years ago when our acetic acid plant in Bardero updated its instrumentation.

The A.O.A. II control and safety system includes five workstations with local and remote screens for operations, engineering, information management and maintenance. The controllers utilize more than 2,000 input/output (I/O) points at multiple remote locations. In addition, the system integrates more than 300 field devices having Profibus or HART communications.

We hadn’t any previous operational experience with digital communication between field instrumentation and a distributed control system (DCS). So, implementing digital communication between the field instrumentation and the DCS’s remote units (via a Profibus network) was an important challenge, and one that we successfully met.

For the SIS we rely on System 800xA High Integrity. This is a complete, scalable TÜV-certified IEC 61508- and IEC 61511-compliant SIS that spans the entire safety loop, including SIL-rated controllers, field input devices, I/O modules and field actuators.

For almost a year before the new plant went into operation we worked closely with ABB, enabling me to learn a great deal about how best to utilize System 800xA’s functionality.

Substantial benefits
The integrated 800xA safety and control system cut the hardware installation in half — we only needed one, not two, of everything, including one set of engineering tools. This saved time and money. Engineers and operators only had to be trained on a single system, which decreased training time and enhanced safety. In addition, while engineers used to set up, configure and calibrate instrumentation in the field, with System 800xA they can do all of this at their workstation.

1 of 2 < 1 | 2 View on one page
Show Comments
Hide Comments

Join the discussion

We welcome your thoughtful comments.
All comments will display your user name.

Want to participate in the discussion?

Register for free

Log in for complete access.


No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments