1660240581197 Rosenzweigweb

Corporate Misdeeds? You Must Blow the Whistle!

Feb. 10, 2016
A leading professional society now requires such action

Chemical engineers who encounter or uncover a corporate misdeed that could impact the public’s wellbeing must act — at least if they’re members of the Institution of Chemical Engineers (IChemE), Rugby, U.K. It recently revised its “Rules of Professional Conduct and Disciplinary Regulations” to oblige members to “raise a concern about a danger, risk, malpractice or wrongdoing which affects others (‘blow the whistle’) and support a colleague to whom the member has a duty of care who in good faith raises any such concern.”

[pullquote]

IChemE director Andy Furlong explains: “We have strengthened our code of conduct and this move provides further protection and support for chemical engineers who come across illegal practices. IChemE membership is a signal of trustworthy professionalism and it strengthens public trust in chemical engineering.”

Judith Hackitt, chair of the U.K.’s Health and Safety Executive, and an IChemE past president, welcomed IChemE’s move: “It is vital that all chemical engineers think about how they will uphold the high standards of our profession and who they will speak to if they need to report concerns about unethical or bad practices.”

No specific incident of whistleblowing or lack of it led to the revision of the rules, says IChemE. The institution simply decided it was time to explicitly address the issue.

IChemE provides a much clearer and stronger mandate than that, for instance, issued by the American Institute of Chemical Engineers (AIChE), New York City. Its “Code of Ethics” hints at the need for whistleblowing in some situations but doesn’t demand it. The code states that AIChE members should: “formally advise their employers or clients (and consider further disclosure, if warranted) if they perceive that a consequence of their duties will adversely affect the present or future health or safety of their colleagues or the public.” Perhaps it’s time for AIChE to revisit the code.

Requiring members to whistleblow or support people who do certainly is a worthwhile move. However, it puts the onus on members but lets the professional society itself off the hook for providing support. IChemE believes it might have a role to play. Indeed, it now is investigating the viability of setting up a mechanism to support whistleblowers. However, the institution cautions that it’s too early to say whether such a move is viable and what the mechanism might involve. Stay tuned!

We never can forget that the nature of many of the materials our industry uses and produces and the processes it operates can pose significant risks beyond the plant gate. That’s why, of course, safety and environmental protection are such priorities. However, lapses occur — unfortunately, sometimes deliberately. When we come across miscues or misdeeds that threaten the public wellbeing, we should not stay silent. Morality and ethics should compel taking action whether or not our professional societies demand it. That takes real courage, though. Speaking out can incur significant personal consequences, as Dirk Willard recounted last year in “Blow The Whistle.”  In addition, perseverance often is needed — I covered a classic example of this in “A Milestone Book Turns 50,” http://goo.gl/EM2xew, which focused on “Silent Spring” and its author Rachel Carson.

I applaud IChemE’s move. Telling members to whistleblow when necessary is worthwhile — but easy. Actually providing institutional support to whistleblowers is an important and all too rare action that IChemE certainly should consider.

MARK ROSENZWEIG is Chemical Processing's Editor in Chief. You can email him at [email protected]

About the Author

Mark Rosenzweig | Former Editor-in-Chief

Mark Rosenzweig is Chemical Processing's former editor-in-chief. Previously, he was editor-in-chief of the American Institute of Chemical Engineers' magazine Chemical Engineering Progress. Before that, he held a variety of roles, including European editor and managing editor, at Chemical Engineering. He has received a prestigious Neal award from American Business Media. He earned a degree in chemical engineering from The Cooper Union. His collection of typewriters now exceeds 100, and he has driven a 1964 Studebaker Gran Turismo Hawk for more than 40 years.

Sponsored Recommendations

Keys to Improving Safety in Chemical Processes (PDF)

Many facilities handle dangerous processes and products on a daily basis. Keeping everything under control demands well-trained people working with the best equipment.

Get Hands-On Training in Emerson's Interactive Plant Environment

Enhance the training experience and increase retention by training hands-on in Emerson's Interactive Plant Environment. Build skills here so you have them where and when it matters...

Rosemount™ 625IR Fixed Gas Detector (Video)

See how Rosemount™ 625IR Fixed Gas Detector helps keep workers safe with ultra-fast response times to detect hydrocarbon gases before they can create dangerous situations.

Micro Motion 4700 Coriolis Configurable Inputs and Outputs Transmitter

The Micro Motion 4700 Coriolis Transmitter offers a compact C1D1 (Zone 1) housing. Bluetooth and Smart Meter Verification are available.