ABB Warns Of Challenging Conditions Ahead
The ability of technology to improve decision-making and drive profitability in global chemical manufacturing will be critical in meeting these challenges.
Conditions over the next decade are likely to become more challenging with considerable uncertainty and disparity of performance throughout the chemical industry, warns ABB in the first of a newly-released, two-part white paper “Transforming Chemical Operations Through Technology.” The white paper argues that conditions now show the chemical industry is at an important stage of transformation and explores the external and internal challenges which can be addressed through digitalization. The paper suggests that in an uncertain macroeconomic environment and an industry with significant production and geography-related complexity, chemical manufacturers would be wise to invest in digital technologies and advanced analytics to help them…
Use Automation To Reduce Operator Stress, Increase Plant Safety
New ISA Book Covers SIS Lifecycle
Combine Wireless With Analytics To Improve Efficiency
Apply Elbow Grease Before Buying Tech Solutions
Pairing the technologies eases evaluation of process units with little or no wired instrumentation
Plant managers always are looking for ways to improve operational performance or reduce costs. This effort involves many elements; much hinges on the condition and performance of process equipment. Getting a handle on relevant metrics requires…
Emerson Gives $1.5M For Texas A&M Advanced Automation Lab
Call It Assault On Batteries
Nominations Open For FieldComm Plant Of The Year
Energy Harvester: Temperature Swings Power Sensors
Consider Process Colorimetric/Photometric Analyzers
Field-based units can provide laboratory-quality results in near real time
Many chemical plants need colorimetric/photometric analysis of various compounds in their process and wastewater systems. Historically, processors relied upon lab-based bench top systems to perform this type of analysis. Today however, improved…
Infographic – Gas Analytics Study Finds ROI, Accuracy, Proof Key Factors
Don’t Get Duped By Deficient Data
Poll: Characterize the Adequacy of Your Site's Maintenance of Sampling System
Minimize Gas Chromatograph Downtime
ISA publishes new book on safety instrumented systems life cycle based on ISA/IEC 61511 functional process safety standard.
The International Society of Automation (ISA) publishes a new book that covers the entire life cycle of safety instrumented systems (SIS)—including specification, design, analysis, programming, installation, maintenance and change management. “Safety Instrumented Systems: A Life-Cycle Approach” by Paul Gruhn, PE, CFSE, and Simon Lucchini, CFSE, MIEAust CPEng, leverages the performance and documentation requirements defined in the ISA/IEC 61511 functional process safety standard along with the authors’ nearly 80 years of safety system experience, expertise and insights.“The world of safety instrumented systems is complex; technology and knowledge continue to grow and evolve,” says Gruhn, global functional safety consultant at…
ABB Wraps Up GE Acquisition
Data Integrity Seminar Series Features Global Expert McDowall
Program Tackles Skills Gap In Manufacturing
Hawk Earns Safety Certification For Centurion Guided Radar
Get to the Bottom of Level Limitations
SAP And Endress+Hauser Cooperate On IIoT Applications
TAMU Process Safety Center Releases Fall Course Schedule
The Mary Kay O'Connor Process Safety Center at the Texas A&M Engineering Experiment Station announces its Fall 2018 safety engineering distance learning courses.
The Mary Kay O'Connor Process Safety Center at the Texas A&M Engineering Experiment Station announces its Fall 2018 (August 2018 – December 2018) safety engineering distance learning courses. The last date for registration is August 27, 2018.The courses are:SENG 310/680 Industrial Hygiene EngineeringInstructor: Dr. Noor QuddusApplication of scientific and engineering principles in the selection and design of control systems related to chemical, physical and ergonomic exposures in the process and manufacturing industries; relationships of criteria, analysis and specifications for the assessment and control of occupational related illnesses.SENG 310/680 Industrial Hygiene EngineeringInstructor: Dr. Noor QuddusApplication of scientific…
Does Your Existing SIS Get the Job Done?
ISA Updates Automation Body Of Knowledge Guide
Intellectual Property: Foil Foreign Filching
Tim laughed when he walked into my cubicle to talk. He managed a specialty manufacturing company that boasted around 100 years of experience. A firm had just contacted him wanting his help. Tim explained that his background check showed that it did…
Hexagon Acquires Online Design Training Service
Piping: Understand A Cold Fact About Ice
Project Management: Combat Scope Creep
Energy Management Software: EMISs Evolve to See the Bigger Picture
Hydraulic Institute Creates Authorized Training Partner Program
Corrosion Products & Equipment, Inc. is the first to join the program.
Recognizing the growing need for trained personnel throughout the pump industries and in the end-user community, the Hydraulic Institute, through its educational subsidiary, Pump Systems Matter (PSM), creates an Authorized Training Partner (ATP) program. The ATP Program will help bring Pump Systems Matter curriculum to the community of operators and maintenance personnel who face increasing challenges and workforce training demands.The ATP Program is designed for organizations that would not otherwise qualify for HI membership, but are active in the pump industry. Partners must meet specific qualification criteria and commit to using qualified instructors who meet HI standards of pump and pump system knowledge, while possessing both…
Busch Vacuum Pumps Acquires Swiss-Based NSB Gas Processing
Spray Tech Forum Addresses Petrochemical Performance Optimization
Process Puzzler: Vanquish Valve Vexations
Powder Handling: Develop Drying Curves
They can provide insights for solving many problems
When faced with a drying problem at a plant, the first thing I ask for is a drying curve. Often, people will look at me as if I have three heads —sometimes grumbling: “Why do we need that? We know that drying the material completely takes twenty…
Freeman Hosts Powder Flow Seminar
Pharma Prescribes Continuous Processes
Deftly Diagnose a Dust Collector
Solid Handling: Stop Struggling With Your Slurry
Petroteq Energy Partners With Cavitation Technologies
Petroteq Energy Inc. partners with Cavitation Technologies, Inc.
Petroteq Energy Inc., a company focused on the development and implementation of proprietary technologies for the energy industry, partners with Cavitation Technologies, Inc., which provides offerings to various fluids processing industries. The companies enter into a licensing agreement to test their equipment during oil production for workflow efficiencies and to lower the cost of production obtained through Petroteq’s oil sands extraction process. The agreement between Petroteq and CTi will reportedly seek to generate a modification of non-conventional oil, in the form of bitumen, obtained through oil sands. CTi’s Nano Reactor System utilizes proprietary technology that can influence and alter the chemical and physical composition…
“Green” Methane Pilot Plant Starts Up
Plasma Takes Heat off Ammonia Production
AI Collaboration Could Accelerate Catalyst Development
Collaboration Aims For Safe, Scalable Hydrogen Storage
EFCE Honors Work On Complex Separation
Group awards prize for computer-aided process engineering
The European Federation of Chemical Engineering has bestowed its 2018 Excellence Award for an outstanding thesis in computer-aided process engineering to Mirko Skiborowski, research group leader at the Technical University of Dortmund, Germany. His thesis addressed optimization-based methods for the conceptual design of hybrid processes for the separation of non-ideal, multi-component liquid mixtures.The award includes a cash prize of €1, 500 (≈$1,770) plus a travel grant to attend the 28th European Symposium on Computer-Aided Process Engineering (ESCAPE-28) now taking place (June 10–13) in Graz, Austria.More details can be found here.
Understand Industrial Wastewater Treatment
Ava Acquisition Boosts BHS-Sonthofen’s Mixing Portfolio
Save Energy In Distillation
Processing Equipment: Confront A Column Conundrum
Deftly Deal with Distillation Performance
Several issues contribute to water hammer and leakage of condensate
Jake recently had graduated college and started his first job. His new company assigned him to one of its large sites. There, Jack, a senior engineer who had been at the site his entire career, would mentor Jake.One of the areas both were responsible for was a methanol distillation or finishing process. Methanol, created in previous steps, was pumped to this final refining area to produce product for customers. Because it was a very low-pressure distillation process, the temperature of the steam and condensate in the reboiler also were low. Earlier in the process, heat recovered from the reformers generated steam. Then, the steam was let down through several stages of power generation to provide the boil-up for the distillation operation.
Video Explores Stainless Steel Performance In Cooling Towers
Consider Open-Rack Seawater Heat Exchangers
Troubleshoot Heat Exchanger: Don’t Jump To Solutions
Energy Saver: Don’t Neglect Spring Cleaning Duties
Properly Select Vacuum Pump Motors
Go beyond rated power to find the real energy consumption
Plant designers frequently opt for the lowest possible rated power of drive motors, e.g., when selecting vacuum pumps. However, the kilowatt specification on the nameplate doesn’t tell very much about the real energy consumption of the device in…
Baldor Electric Becomes ABB
High Motor Current Causes Concern
Energy Saver: Ponder Online Performance Testing
EASA Releases Spring 2018 Educational Seminar Schedule
Humans are good at ad hoc intervention and non-linear reasoning. Machines and automation are good at repetitive functions, steady-state functions and transition management.
Procedures are everywhere; and nowhere is this more obvious than in the process industries. Many like to refer to the process industries as being largely “continuous,” but this – in fact – is a misrepresentation. The state of process facilities constantly changes. Whether starting up, shutting down, changing grades or in the middle of a turnaround, a plant operates by procedures and transitional states. These can either run smoothly to pro-vide superior plant performance and a safe and orderly start-up/shutdown/transition, or result in costly unplanned shutdowns, incidents, lost product and lost opportunities.Procedures are a predetermined group of tasks that must be completed in a set order and in a consistent manner to achieve a…
How To Stock And Store Spare Parts
43rd Honeywell Users Group Americas Showcases New Technologies
Business Economists Expect Continued Investment, Job Gains
NABE releases July Business Conditions Survey.
The National Association for Business Economics (NABE) releases its July 2018 Business Conditions Survey, which indicates strong sales and steady profit margins in the second quarter, as well as increasing materials costs and wages, according to NABE Business Conditions Survey chair Sara Rutledge, independent real estate economist and data science research fellow at StratoDem Analytics. NABE panelists reportedly expect continued growth over the next year and additional job gains. Highlights of the report include: For a fourth consecutive quarter, the share of panelists reporting rising sales at their firms increased.
Expectations regarding future sales rose sharply from those in the previous survey.
One-third of respondents reports…
Chemical Processing Economic Snapshot Ending April 2018
Positive Momentum Continues For Equipment Finance Industry
Second Quarter Shows Continued Rise In Global Chemicals Production
Quick Poll: Tradeoff between capital cost and operating/maintenance cost
IChemE President Urges Reform
Poll Results: Engineer Turnover
Poll: What Is The Average Tenure Of A Plant Manager At Your Site?
Plant Operations: Become A Great Troubleshooter
EPA Covers Confidential Chemicals
Guidance aims to help companies that need to protect a substance’s chemical identity
On June 21, 2018, the U.S. Environmental Protection Agency (EPA) issued guidance to assist companies in creating structurally descriptive chemical names for substances whose specific chemical identities are claimed confidential and for listing…
What Happens To REACH Post-Brexit?
Partnering Promotes Environmental Progress
EPA Eyes Nonylphenol Ethoxylates
Canadian Refinery Recycles All Its Wastewater
Clarke Receives API 641 Certification For Low-Emission Shutter Valve
Lasers Target Carbon Dioxide
Citizens Challenge EPA
Europe Assesses Pesticide Use
Honeywell Integrates Cyber Security For Connected Operations
Software protects connected operations from cyber threats.
Honeywell launches a software offering to provide cybersecurity to industrial customers who manage diverse process control networks, sites and vendors. As customers continue their digital transformation and their industrial sites become more connected, integrating cybersecurity has become even more critical, according to Honeywell.The multi-site offering for cybersecurity management is based on Honeywell’s ICS Shield, which provides a top-down operational technology (OT) security management option for securing connected industrial control system (ICS) environments with multiple physical sites and multiple automation equipment types. It also enables secure management of remote field assets through a single security operations center.
Cyber Attacks, Political Unrest Threaten Business Resilience
New Indegy Service Provides Visibility Into ICS Risk
Maintain Security In A Digital World
Quick Poll: Management-Of-Change Procedures
Take our quick poll now -- please!
New Publication Defines Risk Management for Overpressure
Refinery Explosion Injures Many
Explosion Kills Six At Czech Chemical Plant
Attack Physical Security Threats
Article highlights best strategies for safeguarding people and property from ever-expanding physical threats.
Cyber concerns may be all over the news, but ensuring your facilities’ physical security remains an enduring imperative. Industrial and critical infrastructure facilities face an ever-expanding list of threats coming from all directions – land, sea, and air.Adversarial or innocent trespassers as well as vandalism, sabotage, theft, and malicious attacks are common concerns. Today, there may be weaponized or intelligence-gathering drones flying overhead or submarines underwater. Lone-wolf or organized terrorist attacks are possible. Even an authorized building occupant could “go ballistic.” Are you prepared to handle the possible threats?Because any security lapse may be presumed to result from negligence, choosing the right set of…
Survey: Production Takes Priority Over Safety In Some Cases
Is Process Safety Stuck In A Rut?
Address Wireless Network Vulnerabilities
Personal Safety: Consider Thermal Insulative Coatings
Disaster Planning: Weather The Extremes
Successfully surviving severe natural events demands proper preparation
No one can stop the hurricanes, tornadoes, floods and other severe events that Mother Nature throws our way. However, that doesn’t mean chemical plants shouldn’t prepare to cope with them with as little disruption as possible — to the…
Path for Process Safety Emerges
Make Hazard Analyses Better
Successfully Reduce Process Safety Events — Part 2
Provide Better Protection from Hot Pipes
SPX Cooling Technologies releases an informational video that examines the differences between Grade 301L and Grade 304 stainless steel for cooling tower applications.
SPX Cooling Technologies, Inc., manufacturer of evaporative cooling towers and air-cooled heat exchangers, releases an informational video that examines the differences between Grade 301L and Grade 304 stainless steel for cooling tower applications. In the video, SPX Cooling Technologies Materials Engineer Joe Evans discusses the science behind the material attributes of 301L and 304 stainless steel and why 301L is the preferred material for Marley cooling towers when stainless steel components are specified. While nearly identical in their chromium and nickel content and ability to resist chemical attack and corrosion in typical cooling tower environments, the low-carbon content of Grade 301L offers superior corrosion resistance at welds…
Deter Difficulties with Instrument Air Dryers
Utilities: Maximize Your Air Supply
Upgrade Compressed Air Systems
Appalachia Gas Storage Hub Clears Hurdle
AkzoNobel, Partners Study Renewable Energy Opportunities In Sweden
Researchers Declare “Carbon Neutral” Wood Worse Than Coal
Energy Saver: Is Online Performance Testing Accurate?
Refrigerants: What Kind of Fouling is That?
Crane Releases Updated Flow Of Fluids Technical Guide
Alfa Laval Appoints Vanhoren President And CEO
Poll Results: Steam-Trap Monitoring And Maintenance
We asked readers: How adequate do you consider the steam-trap monitoring and maintenance program at your site?
Poll: How has your site's attention to its water supply and discharge changed?
Siemens Reaches Additive Manufacturing Milestone
Energy Harvester Stars For Steam Monitoring
CP Poll: Steam-trap monitoring and maintenance program
Continuous Vacuum Filtration Enhances Zinc Oxide Process
Troubleshooting Tips Tap Common Sense
HEI Releases Updated Standards For Air Cooled Condensers
Gain full access to our blogs, wikis and members-only content.
I've lost my password