Are you looking for more information about handling powders?
Do you want to prevent problems before they start and consider alternative methods?
This Chemical Processing eHandbook takes a look at how chemicals manufacturers are meeting the challenges of handling powders. Download this Chemical Processing eHandbook for insights and strategies including:
- Prevent Problems with Fine Particles: Sampling is crucial and demands particular care.
- Don’t Err About Fluidization: Consider its under-appreciated advantages and broader utility.
- Get the Most Out of Your Sterilization Process: Take a close look at two commonly used methods and their associated vacuum technology.
Combustible dust explosions are a risk in many areas of a chemical plant. Are you in compliance? This white paper reviews the OSHA NEP for combustible dust, NFPA standards on explosion hazards, equipment used for explosion protection, and how to avoid the most common shortfalls to compliance.01/27/2014
Hazardous locations have or could potentially have high concentrations of flammable gases, vapors, combustible dusts, etc. A small spark can lead to a horrific explosion dangerous to equipment and workers in the area. Equipment located in hazardous areas must be specifically designed to prevent ignition and explosion.02/24/2012
Wet scrubbers and dry media dust collectors are two very different technologies used to capture dusts generated during production processes. Both types have inherent advantages and disadvantages. Which is best for your application? The choice is not always clear-cut, but this white paper will help with the decision process by providing a comparison between wet and dry dust collectors. It will outline general parameters for equipment selection with respect to dust properties including combustibility, explosibility, particle size, moisture and adhesiveness. It will also discuss how to apply NFPA 484: Standard for Combustible Metals, the standard that best addresses wet collection. Though NFPA 484 is specific to metals, some of its content can and should apply to nonmetal combustible dusts.04/28/2016
This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.01/05/2006
This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.07/05/2005
This white paper from Delta Controls outlines a range of selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 common industrial materials are included.10/15/2004
This 11-page PDF whitepaper creates an outline for a standardized approach to the devices and items routinely provided to allow personnel to cross unit handling material handling conveyors.05/01/2005
The dangers posed by combustible dusts are no longer being swept under the rug. Tougher regulations and greater corporate resolve are making dust hazard management an increasingly important topic for every manufacturing sector including the chemical, food and pharmaceutical industries. This Special Report, brought to you by Chemical Processing details the dangers posed by combustible dusts and includes: the latest thinking on both hazard identification and mitigation; it identifies how to mitigate dust hazards in oral solid dosage facilities; it takes an in-depth look at regulations and the thinking behind suppression technologies as a result of past activity; more!04/17/2012
One of the trickiest materials to process, solids are comprised of powders or particulates, a continuous gaseous phase (usually air) and, almost always, a liquid component. Processors that handle solids know only too well the types of throughput problems that come up on a recurring basis. Effective, economical and safe slurry management; flowability during processing, accurate inventory and volume level management are all very real challenges faced by processors of solids. In this Chemical Processing Powder eHandbook, we take a look at how to effectively handle solids including:
- Properly accounting for how bulk solids actually will flow in a vessel or overall process -- we take a look at some simple parameters that can often provide a good sense of flowability
- Strategies for avoiding slurry trouble
- Mitigating pipe segment force imbalances with Reactor Excursion and Leakage Analysis Program
- Acoustics-based level measurement for accurate powder measurement in bins, tanks and silos
- Explosion protection methods including suppression, isolation and venting
Learn more about how to effectively handle powders during processing. Download your copy of this ChemicalProcessing Powder eHandbook now.11/20/2012
As many chemical processors know, processing powders can be tricky. Powder properties can be affected if the materials are stored for long periods. Powders can be compressed, vibrated, aerated and exposed to moisture. And specific processes like granulation, blending, drying, milling, lubricating and compression put requirements on how powders can be handled. In this Chemical Processing Powder eHandbook, we take a look at how to effectively process powder including:
- Compression dryers – the case for choosing a solution that produces optimal air quality and low energy consumption
- GHS – understanding the requirements and what it means to chemicals processors
- Predicting powder flow behavior
- Vibratory screen cleaning methods
- Fine powder flushing - eliminating a common bin-afflicting problem caused by trapped air
- Tubular Drag Conveying Technology – an alternative to pneumatic conveying
- Addressing dust hazards – including explosions
This white paper discusses highly acidic chemical process slurries and the use of continuous vacuum filtration technologies for filtration, cake washing and drying.
First, the basics and benefits of continuous vacuum filtration technologies are reviewed followed by case-studies. In this first process, the precipitated solids are in sulfuric acid slurry. The challenge is to process 2200 kg/hour of dry solids for filtration, counter-current washing and drying in a contained environment.
In this second process, the objective is to process precipitated solids in an hydrochloric acid slurry. The white paper concludes with a framework for vacuum technology selection and how this can be applied to other toxic and difficult chemical process filtrations.10/18/2016
Powders and the dust they create have a tendency to create a myriad of material handling headaches. For example, dust can wreak havoc on the performance and accuracy of many level sensors, rendering them inaccurate and unreliable. Powder particles under the influence of gravity can become compacted resulting in inter-particle friction that may prevent flow movement. In this Chemical Processing Powder eHandbook, we offer a few tips for optimizing powder processing.08/12/2013
Processing powders can be tricky. During processing, powder properties can be affected by many different factors including if the materials are stored for long periods, if the materials are exposed to moisture, and by fluctuations in the mechanical processes that handle powders. In this Chemical Processing Powder eHandbook, we take a look at technologies and strategies for handling powders including: Options for large drivers – with a focus on variable-speed electric motors Innovative level measurement technologies How shear cell instruments and relative humidity tests can determine a powders flow behavior Indoor flameless venting – how modern technology can help eliminate the risk of damage and reduce maintenance costs Learn how to process powders with ease. Download your copy of this Chemical Processing Powder eHandbook now.02/15/2013
Some chemical makers are missing opportunities to reduce operating costs and increase profits because they aren’t striving to re-engineer and streamline their processes. A plant often can achieve substantial benefits through simplified steps that do more and work better with less complexity. In this Chemical Processing Powder eHandbook, we take a look at strategies and solutions for optimizing powder processing including: • Streamlining the chemical processing process – enhancing operations by removing complexities that creep in over time • Suppression systems – How a properly designed and engineered suppression system offers many advantages including explosion aversion • Mitigating the impact of uncertainty - how the correct weighing system and a proper maintenance schedule can ensure accuracy Learn strategies for optimizing your powder processing. Download your copy of this Chemical Processing Powder eHandbook now.05/15/2013
Powders developed to meet certain product performance targets often suffer from inconsistent and unpredictable flow. The reasons for this are many. A material's characteristics - adhesiveness, cohesiveness, aeratability, pressure-sensitivity - often change during processing and can cause flow problems to crop up. Couple this with changes in the processes themselves and costly downtime can be the result. In this Chemical Processing Powder eHandbook, we take a look at strategies and solutions for overcoming powder processing challenges including:
- Making the most of flow additives - understand their impact on overall powder behavior to optimize flow
- Improving performance of gravimetric feeders - tips to avoid poor accuracy and frequent downtime
- Protecting against combustible dust explosion - economical approaches for protecting spray dryer processes and solutions
Make the most of your powder processes. Download your copy of this Chemical Processing Powder eHandbook now.
No matter what industry youre in, chances are you use some form of conveying. Whether it be pneumatic, flexible screw, aeromechanical or other, different conveyors are required to handle different products. But which conveyor is best suited for your operation? Despite the fact that conveyors have been around for almost a hundred years, this question still baffles many industries. In order to choose the right conveyor for your operations, you need to consider your conveyor's use - production, processing, packaging, and you need to consider your business objectives - improve operations? reduce labor?
In this special report, we look at the different types of conveyors, discuss the use of tubular bag conveyors, and provide 10 tips to prevent a variety of common problems that could occur with pneumatic conveyors.04/20/2009
One of the trickiest materials to process, solids are comprised of powders or particulates, a continuous gaseous phase (usually air) and, almost always, a liquid component. Processors that handle solids know only too well the types of throughput problems that come up on a recurring basis. Clumping; effective, economical and safe slurry mixing; dust management and dust explosion risk mitigation are all very real challenges faced by processors of solids. In this Chemical Processing Powder eHandbook, we take a look at how to effectively handle solids including:
- Clumping – the 10 most common sources of agglomeration in bulk solids and how to effectively manage them
- Strategies for optimal slurry mixing
- Level management detection in storage vessels
- Dust explosion risks – how to identify and mitigate when processing solids
- Managing solid cohesiveness with flow strategies
Download your copy of this Chemical Processing Powder eHandbook now.02/13/2012
One of the trickiest materials to process, powders are comprised of solids or particulates, a continuous gaseous phase (usually air) and, almost always, a liquid component. Many factors influence powder composition including size and distribution, surface roughness and hardness. And, how powders are processed -- vibration, compaction, attrition, segregation -- can influence how powders react. In this Chemical Processing Powder eHandbook, we take a look at how to effectively handle powders, safer dryer operations and how to manage phase changes when processing powders. Download your copy today. Download your copy today.11/10/2011