Chemical Processing’s Flow eHandbook: Master Flow Challenges
Issues related to physical properties, process parameters, electronic features and interconnections can all affect the flow of liquids and gases. Often working around the clock to process, transfer, and store sometimes hazardous and corrosive chemicals, processors must tackle issues related to physical properties and process parameters. In this Chemical Processing Flow eHandbook, we take a look at what it takes for chemical processors to master flow challenges for several types of materials with vastly different physical properties including:
How to increase process availability - coriolis mass flow meters provide reliable indication of gas entrainment
Overcoming the challenges of changing gas composition - new technology addresses need for more accurate and efficient biogas measuring
How to ensure proper control of parallel flow paths demands care
Case Study: Speed Pipe Installation - pipe-joining system eliminates need to weld or thread connections
Find out how to master flow challenges. Download your copy of this Chemical Processing Flow eHandbook now.
Chemical Processing Flow eHandbook: Monitoring Flow
The purpose of installing a flowmeter system is to accurately measure flow in a reliable manner. Issues related to physical properties, process parameters, electronic features and interconnections are often given much consideration. Relatively little emphasis, however, is given as to how well the flowmeter will perform its intended purpose. Adding to the confusion are the differences in how performance is expressed and the incomplete nature of the available information. Nevertheless, the quality of flow measurement should be a concern. This Chemical Processing eHandbook takes a look at technologies and solutions affecting flow including:
* Coriolis meters - steps you can take optimize performance when faced with entrained gas
* Magmeters -- why you should consider using them
* How to achieve effective flow control with centrifugal pumps
Chemical Processing Flow eHandbook: Best Practices for Flow
The purpose of installing a flowmeter system is to accurately measure flow in a reliable manner. Issues related to physical properties, process parameters, electronic features, interconnections can all affect the flowmeter performance. This Chemical Processing eHandbook takes a look at technologies and solutions affecting flow as well as the impact of specific regulations on flowmeter systems including:
Specifying the right slurry seal – understanding dual-seal and water-management options
Ground EMFs with Virtual Reference - New grounding method eases electromagnetic flowmeter installation and minimizes costs
Determine Boiler Size Using a Flowmeter - An inline vortex meter reveals the proper steam usage, resulting in significant savings and improved energy efficiency.
Chemical and Pharmaceutical Sight Glass Application Handbook
20-page Sight Glass Application Handbook is a convenient reference for experienced engineers and a great primer for those new to sight glass selection. It offers a full overview of sight glasses for chemical processes, including types of glass, construction, lighting, installation and maintenance.
Case Study: How can manufacturers ensure they are choosing the right heat transfer fluid
Reliable heat transfer fluids are vital to the ability of manufacturers to operate efficiently and productively. However, some heat transfer fluids can degrade over time, resulting in deteriorating performance, impacting operating costs and product quality. With these possible consequences, how can manufacturers ensure they are choosing the right heat transfer fluid, and prevent these problems from occurring?
Bearing isolators 101
A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they dont separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.
Accurate liquid phase density on aerated liquids
This white paper discusses SONAR-based, clamp-on gas volume fraction meters which recently have been introduced to the industry that provide an accurate, real time, measurement of entrained gases. Coupling entrained gas volume fraction monitor with most types of process density meters, enables accurate determination of liquid and the liquid-solid components of aerated mixtures.
7 Applications You Didn’t Know Were Compatible with Microwave
Microwave energy in chemical processing has really come of age over the past few years. Many companies are experiencing the benefits that microwave offers over conventional drying technologies. Other functions include: sterilization, pasteurization, cooking, tempering, dehydration and heating.
While you may have guessed a few of the applications we’re profiling, or may even work with them yourself, we hope at least one or two applications off our list will catch your eye and perhaps start you thinking.
• Analytical Chemistry
• Treatment of Biomass & Biosolids
• Powder Processing
Animal Blood Plasma
• Pyrolysis for Recycling & Waste-to-Energy
Plastics and Rubber
• Petro Chemicals