Fluid Handling

on 'Fluid Handling'

1-20 of 39 < first | prev | | last >
  • Technology expands flowmeter capabilities, reduces costs

    Capacitance-type magnetic flowmeters have traditionally offered the advantage of having non-wetted electrodes and the ability to measure low conductivity fluids. However, they suffered from a sensitivity to flow noise and zero instability. Innovative technology overcomes these limitations and drives magnetic flowmeters into new areas of application, while reducing installed costs.

    Yokogawa
    07/18/2005
  • Oxygen in cell culture/venting ozonated vessels

    This white paper outlines trends and opportunities for gasket standardization in processing plants ... including the potential for more reliable sealing, cost savings, inventory reduction, easier installation and safety practices. Steps are outlined for achieving success in gasket standardization across steel, glass-lined and FRP piping.

    W. L. Gore & Associates, Inc.
    10/18/2006
  • Case Study: How can manufacturers ensure they are choosing the right heat transfer fluid

    Reliable heat transfer fluids are vital to the ability of manufacturers to operate efficiently and productively. However, some heat transfer fluids can degrade over time, resulting in deteriorating performance, impacting operating costs and product quality. With these possible consequences, how can manufacturers ensure they are choosing the right heat transfer fluid, and prevent these problems from occurring?

    Therminol
    07/31/2008
  • Design Considerations for High Liquid Rate Tray Applications

    Except for a few odd services, high liquid rate applications are typically the domain of either trays or random packings. Aside from the distributors, random packing designs are rather straightforward with the designer choosing the proper size to accommodate the fluid flow rates and achieve the desired efficiency. Trays, on the other hand, have a large variety of adjustable parameters and can be especially complex, especially when designed for high liquid rate applications.

    Sulzer Chemtech USA, Inc.
    09/17/2007
  • V-Cone flow meter test results | Chemical Processing

    The American Petroleum Institute Manual of Petroleum Measurement Standards published the results of flow meter tests at the Southwest Research Institute and Utah State University.

    Southwest Research Institute
    03/21/2006
  • Pitfalls of pump piping

    This white paper goes over the three major problems associated with poor pump piping and provides five rules to follow in order to avoid future pitfalls.

    Ross Mackay Associates Ltd.
    06/14/2007
  • Guidelines for Proper Filtration and Delivery of Samples to On-Line Process Analyzers

    Contaminants in plant samples are the most frequent cause of problems with on-line analyzers. Trace contaminants can rapidly build up and cause instrument failure. It’s critical that a filter specifically designed for sampling applications be used rather than a general purpose filter. Read guidelines to ensure proper filtration and sample delivery to on-line analyzers in this white paper.

    Parker
    09/23/2013
  • Special Report -- Control With Flow

    With changes in temperature, pressure, density and viscosity all affecting volumetric flowmeter measurement, how can continuous processors accurately measure the flow of fluids? Download this Special Report to find out how Coriolis flowmeters provide a direct mass measurement that is unaffected by changing process fluid characteristics – improving both accuracy and optimizing operations at your plant.

    Micro Motion
    03/30/2009
  • Five Keys to Avoiding Ethylene Valve Failures

    This concise, compelling overview of best practices in purchasing and maintaining ethylene valve packages is an essential read for industry professionals. The white paper will tell you how to: 1) Select the right seats and seals; 2) Select the right coating materials; 3) Know the quality of the valves you're buying; 4) Find a trusted single resource for your valve package purchases; 5) Keep up with required maintenance.

    Metso
    10/15/2013
  • 7 Applications You Didn’t Know Were Compatible with Microwave

    Microwave energy in chemical processing has really come of age over the past few years. Many companies are experiencing the benefits that microwave offers over conventional drying technologies. Other functions include: sterilization, pasteurization, cooking, tempering, dehydration and heating. While you may have guessed a few of the applications we’re profiling, or may even work with them yourself, we hope at least one or two applications off our list will catch your eye and perhaps start you thinking. • Analytical Chemistry • Treatment of Biomass & Biosolids • Powder Processing Carbon Black Animal Blood Plasma Powdered Eggs • Pyrolysis for Recycling & Waste-to-Energy Plastics and Rubber Farm Waste • Petro Chemicals Frac Sand Grease Processing • Minerals

    Marion Mixers
    06/18/2013
  • Bearing isolators 101

    A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they don’t separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.

    Inpro
    05/17/2005
  • Continuous imaging fluid particle analysis: A Primer

    This paper looks at the issues associated with fluid particle analysis, discusses some of the historical methods used, and introduces a new technology: the continuous imaging fluid particle analyzer.

    Fluid Imaging Technologies
    11/14/2005
  • Design Tips for Sensing Probes

    This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.

    Delta Controls
    01/05/2006
  • Electro-hydraulic system design: Making the right system choices

    Designers who understand and can take advantage of the differences between fluid power and traditional electromechanical power can build machines that produce higher quality output with lower lifecycle costs. This white paper suggests that care must be taken, however, in selecting and sizing the hydraulic system elements and in tuning the motion controller for optimal performance.

    Delta Computer Systems
    08/16/2005
  • Case Study: Closed-System Chemical Dispensing Enhances Safety & Reduces Overall Operating Expenses

    Traditional chemical dispensing methods may leave workers and the environment exposed to harsh chemicals and dangerous fumes. Container Technology resolved this problem using Colder Products Company’s new DrumQuik PRO system, a safe, easy and economic closed-dispensing solution for extracting chemicals from rigid containers such as drums, jerry cans and IBCs.

    Colder Products Company
    07/10/2008
  • Closed System Technology Drives the Trend Toward Safer, More Cost-Efficient Chemical Dispensing

    In dozens of industries and in millions of applications around the world, dangerous chemicals are transferred from their original shipping containers into smaller jugs or buckets or applied to other end-use processes. Historically, the predominant dispensing method in many of these applications has been through an open system where the liquid is poured out of the container. With a poured system, the container is often flipped on its side and the liquid is poured into a secondary container. The user then just carries the bucket to wherever it needs to go. A mental image of this technique quickly reveals its potential dangers and inefficiencies.

    Colder Products Company
    02/13/2009
  • Spray Gas Quench Design Considerations

    The use of spray nozzles to rapidly cool or quench gas streams is an essential application in many industrial processes, such as chemical reaction vessels, incineration, and power plant absorber gas inlet. An optimized spray quench design requires engineering analysis of the operating environment, spray nozzle performance and process reliability. This technical paper describes the design considerations for spray gas quench systems such as nozzle selection, process control, system configuration and reliability. Application of this knowledge can result in a gas quench system that operates efficiently and reliably with reduced vessel size, reduced atomization energy consumption, and minimized downtime, to achieve capital and operational cost savings for your process.

    Bete Fog
    09/16/2009
1-20 of 39 < first | prev | | last >