Implementing Foundation fieldbus
This white paper provides some insight into the process for safely implementing Foundation fieldbus in an area of your facility that has a hazardous classification.
Moore Hawke Fieldbus
Environmental Health and Safety Compliance in Biotech Companies: Common Deficiencies Encountered During Audits
Environmental health and safety (EH&S) compliance programs for companies that house laboratories are complex and not easily maintained. Even the most basic plan involves keeping a variety of permits up-to-date, performing regular employee training, conducting inspections, complying with a myriad of chemical storage and handling requirements, and keeping a number of contingency plans current and complete. This white paper identifies the most common pitfalls and four simple steps to keeping your EH&S program current.
Environmental Health and Engineering
Special Report: Chemical Industry Sees Green
For years the industry has been talking green. But what real strides have been made? Will a Presidential Executive Order compel the industry to speed up efforts to actually go green? While pollution prevention was the original goal of green chemistry, todays efforts promise to have a substantial economic impact. This Special Report will bring you up to speed on fruitful efforts to go green including an update on the growing interest in bio-based feedstocks.
Case Study: RTOs Leave Nothing to HAPpenstance
In September 1998 the EPA promulgated a ruling in 40 CFR, imposing strict new standards to reduce emissions of toxic air pollutants from the manufacture of pharmaceutical products, including prescription and over-the-counter drugs. The agencys rule was intended to reduce emissions of a number of air toxics and hazardous air pollutants (HAPs), including methylene chloride, methanol, toluene and HCI. It was estimated at the time that the ruling would reduce air toxins annually by approximately 24,000 tons or 65 percent from contemporaneous levels. The affected pharmaceutical manufacturing processes included chemical synthesis (drawing a drugs active ingredient) and chemical formulation (producing a drug in its final form).
Anguil Environmental Systems
Closed System Technology Drives the Trend Toward Safer, More Cost-Efficient Chemical Dispensing
In dozens of industries and in millions of applications around the world, dangerous chemicals are transferred from their original shipping containers into smaller jugs or buckets or applied to other end-use processes. Historically, the predominant dispensing method in many of these applications has been through an open system where the liquid is poured out of the container. With a poured system, the container is often flipped on its side and the liquid is poured into a secondary container.
The user then just carries the bucket to wherever it needs to go. A mental image of this technique quickly reveals its potential dangers and inefficiencies.
Colder Products Company
Choosing the Right Emissions Control Option
Determining the most economical option to control airborne emissions during chemical process operations presents several unique challenges. As with any add-on control system, the goal is to minimize the annualized total costs while maintaining proper operation. In this white paper, learn the different options that are available and which ones fit your process the best.
Unwelcome oxygen Tank blanketing is the process of filling the headspace in storage vessels and reactors with an inert gas to prevent its contents from exploding, degrading or polymerizing and to protect equipment from corrosion. A blanketing system is normally designed such that it operates under higher than atmospheric pressures, therefore preventing outside air from entering the vessel. As oxygen and moisture in the air can be undesired in numerous processes and applications, blanketing is done in a wide range of industries, varying from (petro)chemical to food and beverage, pharmaceutical to pure water.
The Green Solution
The ever present emphasis on technological efficiency is just one of several forces behind the pressure on companies to "go green" despite a trying economy. The ultimate criterion that determines whether a motor is truly green is energy efficiency. Technology, long the key to efficiency, can help resolve this issue.
Asking The Right Questions About Cartridge Dust Collection
Over the past decade, cartridge-style dust collectors have overtaken baghouses as the preferred technology for dust collection in the chemical processing industry. Combining high efficiency filtration with compact size and reduced pressure drop, a high efficiency cartridge dust collector will in most cases be the system of choice.
Choosing the best cartridge collection system for a given application, however, involves research and attention to detail. This article will review four key areas of investigation. By reviewing these topics with a knowledgeable equipment supplier and knowing the right questions to ask, chemical manufacturing professionals will be better equipped to make informed dust collection decisions. Download this whitepaper now.
Raising Confidence and Driving Business Value with Product and REACH Compliance
Over the past 10 years, manufacturers have faced an increasing number of compliance and product quality challenges, ranging from new regulations to product recalls. This White Paper details the business case for an integrated and comprehensive view of product and REACH compliance processes. If "done right," it is expected that these improvements to the compliance process can not only provide time and cost savings but also open doors to new markets, lower risks associated with complex supply chains, protect the reputation of the brand, and create a foundation for environmental sustainability.
Designing Sustainable Products
All of the benefits of Product Lifecycle Management can be erased by significant non-compliance events that impact a company through fines, penalties, negative publicity, or prohibition to sell a new product in key markets. Without a sustainability strategy, the PLM value proposition is at risk.
Gas And Dust Explosions -- Relief Sizing Formula
A large number of analytical and highly empirical correlations including monograms reflecting changing standards have been or are being proposed separately for gas and dust explosion relief venting. This white paper provides a generalized formula that is applicable to both gas and dust deflagrations including subsonic and sonic pressure relief conditions and is consistent with available experimental data and industry experience. Application of the model is illustrated for dust explosions. Download now.
Improve Plant Safety - A Chemical Processing Special Report
In chemicals processing, significant hazards exist -- such as those from fire, explosions or toxic release. The processes themselves, the chemicals being processed and the procedures followed, or lack thereof, can all contribute to the risk exposure of these hazards. What can processors do to mitigate these risks? For chemicals processors, it's crucial to implement processes and solutions to detect and prevent these hazards from occurring in the first place.
Chemical Processing has taken an in-depth look at plant safety -- how to identify the hazards and implement processes and procedures to ensure a safer working environment. This comprehensive Chemical Processing Special Report titled: Improve Plant Safety is now available to download for free.
Dangers Lie in the Dust - A Chemical Processing Special Report
The dangers posed by combustible dusts are no longer being swept under the rug. Tougher regulations and greater corporate resolve are making dust hazard management an increasingly important topic for every manufacturing sector including the chemical, food and pharmaceutical industries.
This Special Report, brought to you by Chemical Processing details the dangers posed by combustible dusts and includes:
the latest thinking on both hazard identification and mitigation; it identifies how to mitigate dust hazards in oral solid dosage facilities; it takes an in-depth look at regulations and the thinking behind suppression technologies as a result of past activity; more!
Carbon Adsorption & Reactivation: Turning Obligation into Opportunity in the Chemical Process Industry
Chemical, petrochemical, and oil-reﬁning plants are process-intensive operations with regulatory requirements to protect the surrounding water and air from the effects of industrial pollution. This paper reviews activated carbon adsorption, the reactivation process, liquid phase and vapor phase adsorption design guidelines, and typical applications of the technology in industrial/environmental treatment.
CP Special Report: Hardware Safety
The U.S. Occupational Safety and Health Administration’s Process Safety Management (PSM) Standard [29 CFR 1910.119(j)] require plant management to identify and address hazards. Further challenging plant management, the mechanical integrity (MI) element of the PSM has been difficult for many facilities to implement. In fact, PSM audits by OSHA have consistently demonstrated that MI accounts for a large number of citations at most facilities. In this Chemical Processing Special Report, we take a look at how to effectively implement strategies to comply with PSM standards including:
Common piping, hoses and valves hazards – what PHA (Process Handling Analysis) teams should look for to improve the quality of the hazard evaluation
MI element of PSM – an in-depth look at the stated MI requirements, the perceived interpretation of these requirements and further considerations for identifying your plant’s compliance strategy
MI implications – the impact MI has on plant’s written procedures, training, inspection & testing, and how equipment deficiencies and quality assurance programs are managed
White Paper: Understanding the Risks Associated with FIBCs and Electrostatic Hazards
Flexible Intermediate Bulk Containers (FIBCs) have found their niche in the worldwide transportation of powdered, flaked and granulated products. FIBCs are typically made of woven plastic with some type of liner insert and are often referred to as super sacks, big bags or bulk bags in industry. During filling and emptying of FIBCs there is a steady accumulation of static charge that can result in electrostatic discharges from the FIBC. This may in turn provide sufficient energy for ignition of combustible particulate solids or flammable vapors, not to mention unsettling shocks to nearby personnel. In this white paper we review the NFPA 654 Standard for the Prevention of Fire and Dust Explosions from Combustible Particulate Solids and the importance of why identifying the Minimum Ignition Energy (MIE) of your combustible dust or flammable vapor is a necessary component for selecting the correct FIBC Type for your application. Download now.
Chemical makers increasingly are focusing on water-related issues. In particular, concern over availability is spurring leading operating companies to implement a host of novel strategies and technologies to optimize water use. Chemical makers are implementing strategies and solutions to scale back on their overall usage of water, reuse water and put clean water back in to circulation. In this ChemicalProcessing Water Optimization eHandbook we take a look at how chemical companies are dealing with water challenges
Download your copy of this Chemical Processing Water Optimization eHandbook now.