Most companies have completed at least three process safety management(PSM) compliance audits of their covered facilities since the promulgation of the OSHA PSM standard. These companies, however, are not seeing noticeable improvements in their PSM programs. In fact, many companies feel that their PSM programs have become less effective. What has happened and why? Are there any lessons learned from the Enron collapse and its auditing program? What needs to be done?
Flexible Intermediate Bulk Containers (FIBCs) have found their niche in the worldwide transportation of powdered, flaked and granulated products. FIBCs are typically made of woven plastic with some type of liner insert and are often referred to as super sacks, big bags or bulk bags in industry. During filling and emptying of FIBCs there is a steady accumulation of static charge that can result in electrostatic discharges from the FIBC. This may in turn provide sufficient energy for ignition of combustible particulate solids or flammable vapors, not to mention unsettling shocks to nearby personnel. In this white paper we review the NFPA 654 Standard for the Prevention of Fire and Dust Explosions from Combustible Particulate Solids and the importance of why identifying the Minimum Ignition Energy (MIE) of your combustible dust or flammable vapor is a necessary component for selecting the correct FIBC Type for your application. Download now.
This paper provides the viewpoint of the American Conference of Governmental Industrial Hygienists (ACGIH), a private not-for-profit, non-governmental corporation open to all industrial hygienists or other occupational health and safety professionals. The authors have the opinion that there are misunderstandings about the use of regulated health and safety standards.
In part one of this article, they provide some information on how regulations are formed and advice on using these values to conduct business. Employers and employees need this fundamental understanding to make informed health and safety decisions. This information is also useful for guiding public decisions about everyday toxic exposures.
The unfortunate propensity of dust explosions to destroy entire facilities and claim lives is very real. Powder handling processes often are comprised of interconnected enclosures and equipment. Flame and pressure resulting from a dust explosion can therefore propagate through piping, across galleries, and reach other pieces of equipment or enclosures, leading to extensive damage. In this Chemical Processing Special Report, we take a look at the latest NFPA standards and dust explosion mitigation strategies. This Special Report covers:
Significant revisions to dust explosion standards – NFPA 654 major changes include new administrative requirements
How to defuse dust dangers - carefully consider and then counter risks of fire and explosion
Five common dust explosion misconceptions that can lead to a false sense of security
Prepare your facility against potential dust explosion dangers. Download your copy of this Chemical Processing Special Report now.
EPA tracks emissions of six principal air pollutants - carbon monoxide, lead, nitrogen oxides, particulate matter, sulfur dioxide, and volatile organic compounds. All have decreased significantly since passage of the Clean Air Act in 1970 - except for nitrogen oxides.
The ever present emphasis on technological efficiency is just one of several forces behind the pressure on companies to "go green" despite a trying economy. The ultimate criterion that determines whether a motor is truly green is energy efficiency. Technology, long the key to efficiency, can help resolve this issue.
For years the industry has been talking green. But what real strides have been made? Will a Presidential Executive Order compel the industry to speed up efforts to actually go green? While pollution prevention was the original goal of green chemistry, todays efforts promise to have a substantial economic impact. This Special Report will bring you up to speed on fruitful efforts to go green including an update on the growing interest in bio-based feedstocks.
Safe design has long been a priority in the process industries. A safe design basis, together with a formal safety management system and safety practices, procedures, and training, is critical for providing that level of confidence required for risk management. The goal of process safety management is to consistently reduce risk to a level that can be tolerated by all concerned. A systematic, risk-based approach to safety design can help eliminate hazards that pose intolerable risk from the process and mitigate the potential consequences of hazards.
This 15-page paper focuses on the additional degrees of complexity that reactive systems pose for emergency relief systems. It covers topics such as how to screen for reactivity and what practices, standards and regulations should be followed, as well as a host of other issues.
This 15-page paper discusses the approach that should be taken when using insulation on vessels containing reactive chemicals, including how to determine the required response time for a given insulation thickness. It provides a number of specific recommendations.
Over the past 10 years, manufacturers have faced an increasing number of compliance and product quality challenges, ranging from new regulations to product recalls. This White Paper details the business case for an integrated and comprehensive view of product and REACH compliance processes. If "done right," it is expected that these improvements to the compliance process can not only provide time and cost savings but also open doors to new markets, lower risks associated with complex supply chains, protect the reputation of the brand, and create a foundation for environmental sustainability.
This guide from the U. S. Occupational Safety and Health Administration covers pre-startup safety review, mechanical integrity, how-work permits, management of change, incident investigation, emergency planning and response and compliance audits, among other topics.
This new U. S. Occupational Safety and Health Administration paper describes OHSA's confined-space satndard, and discusses how to meet it by controlling hazards, administering entry permits and assigning duties, as well as how to deal with emergencies and OSHA assistance available.
Gaseous oxygen measurement with amperometric sensors is the most direct and easiest solution for oxidation and explosion protection.
Unwelcome oxygen Tank blanketing is the process of filling the headspace in storage vessels and reactors with an inert gas to prevent its contents from exploding, degrading or polymerizing and to protect equipment from corrosion. A blanketing system is normally designed such that it operates under higher than atmospheric pressures, therefore preventing outside air from entering the vessel. As oxygen and moisture in the air can be undesired in numerous processes and applications, blanketing is done in a wide range of industries, varying from (petro)chemical to food and beverage, pharmaceutical to pure water.
In chemicals processing, significant hazards exist -- such as those from fire, explosions or toxic release. The processes themselves, the chemicals being processed and the procedures followed, or lack thereof, can all contribute to the risk exposure of these hazards. What can processors do to mitigate these risks? For chemicals processors, it's crucial to implement processes and solutions to detect and prevent these hazards from occurring in the first place.
Chemical Processing has taken an in-depth look at plant safety -- how to identify the hazards and implement processes and procedures to ensure a safer working environment. This comprehensive Chemical Processing Special Report titled: Improve Plant Safety is now available to download for free.
Hazardous locations have or could potentially have high concentrations of flammable gases, vapors, combustible dusts, etc. A small spark can lead to a horrific explosion dangerous to equipment and workers in the area. Equipment located in hazardous areas must be specifically designed to prevent ignition and explosion.
Read this White Paper to learn:
Types of hazardous areas
Conditions classified as hazardous
Specifications for equipment located in hazardous areas
Explosion proof dryers designed for compressed air systems