Hazard Communication Guidelines for Compliance
OSHAs Hazard Communication Standard (HCS) is based on a simple conceptthat employees have both a need and a right to know the hazards and identities of the chemicals they are exposed to when working.
Guidance note for environmental safety instrumented systems
Safety Instrumented Systems (SIS) are designed to monitor the process and control outputs to prevent or mitigate hazardous events. The design process strives for inherent safety, which is enhanced by applying multiple independent safety layers. Learn how to prevent accidents with prevention layers and minimise the consequences with mitigation layers.
P & I Design
Gas And Dust Explosions -- Relief Sizing Formula
A large number of analytical and highly empirical correlations including monograms reflecting changing standards have been or are being proposed separately for gas and dust explosion relief venting. This white paper provides a generalized formula that is applicable to both gas and dust deflagrations including subsonic and sonic pressure relief conditions and is consistent with available experimental data and industry experience. Application of the model is illustrated for dust explosions. Download now.
Facility Major Risk Survey
This 8-page primer describes a method for identification of major acute risks in existing process facilities that can potentially affect on-site and off-site populations and for prioritization of mitigation methods.
Environmental Health and Safety Compliance in Biotech Companies: Common Deficiencies Encountered During Audits
Environmental health and safety (EH&S) compliance programs for companies that house laboratories are complex and not easily maintained. Even the most basic plan involves keeping a variety of permits up-to-date, performing regular employee training, conducting inspections, complying with a myriad of chemical storage and handling requirements, and keeping a number of contingency plans current and complete. This white paper identifies the most common pitfalls and four simple steps to keeping your EH&S program current.
Environmental Health and Engineering
Dust Collection System Complies with Combustible Dust Standards
Combustible dust explosions are a risk in many areas of a chemical plant. Are you in compliance? This white paper reviews the OSHA NEP for combustible dust, NFPA standards on explosion hazards, equipment used for explosion protection, and how to avoid the most common shortfalls to compliance.
Camfil Air Pollution Control
Designing Sustainable Products
All of the benefits of Product Lifecycle Management can be erased by significant non-compliance events that impact a company through fines, penalties, negative publicity, or prohibition to sell a new product in key markets. Without a sustainability strategy, the PLM value proposition is at risk.
Dangers Lie in the Dust - A Chemical Processing Special Report
The dangers posed by combustible dusts are no longer being swept under the rug. Tougher regulations and greater corporate resolve are making dust hazard management an increasingly important topic for every manufacturing sector including the chemical, food and pharmaceutical industries.
This Special Report, brought to you by Chemical Processing details the dangers posed by combustible dusts and includes:
the latest thinking on both hazard identification and mitigation; it identifies how to mitigate dust hazards in oral solid dosage facilities; it takes an in-depth look at regulations and the thinking behind suppression technologies as a result of past activity; more!
Chemical plants vary widely in size and complexity yet share common goals for maximizing efficiency safely and cost effectively. This Chemical Processing Special Report tackles two areas in chemical processing - compressed air systems and powder handling - where gains can be achieved for improving efficiency. We also address the concerns of safety as it relates to drying compressed air in hazardous atmospheres.
Whether compressed air systems are centrifugal, rotary screw, reciprocating compressors or a combination, this Special Report provides and understanding of what’s involved in getting a suitable supply of compressed air.
Efficient powder handling can be achieved through optimized humidity management.
Safe drying practices in hazardous air locations
CP Special Report: Hardware Safety
The U.S. Occupational Safety and Health Administration’s Process Safety Management (PSM) Standard [29 CFR 1910.119(j)] require plant management to identify and address hazards. Further challenging plant management, the mechanical integrity (MI) element of the PSM has been difficult for many facilities to implement. In fact, PSM audits by OSHA have consistently demonstrated that MI accounts for a large number of citations at most facilities. In this Chemical Processing Special Report, we take a look at how to effectively implement strategies to comply with PSM standards including:
Common piping, hoses and valves hazards – what PHA (Process Handling Analysis) teams should look for to improve the quality of the hazard evaluation
MI element of PSM – an in-depth look at the stated MI requirements, the perceived interpretation of these requirements and further considerations for identifying your plant’s compliance strategy
MI implications – the impact MI has on plant’s written procedures, training, inspection & testing, and how equipment deficiencies and quality assurance programs are managed
Continuous PHA Revalidation
A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.
Closed System Technology Drives the Trend Toward Safer, More Cost-Efficient Chemical Dispensing
In dozens of industries and in millions of applications around the world, dangerous chemicals are transferred from their original shipping containers into smaller jugs or buckets or applied to other end-use processes. Historically, the predominant dispensing method in many of these applications has been through an open system where the liquid is poured out of the container. With a poured system, the container is often flipped on its side and the liquid is poured into a secondary container.
The user then just carries the bucket to wherever it needs to go. A mental image of this technique quickly reveals its potential dangers and inefficiencies.
Colder Products Company
Choosing the Right Emissions Control Option
Determining the most economical option to control airborne emissions during chemical process operations presents several unique challenges. As with any add-on control system, the goal is to minimize the annualized total costs while maintaining proper operation. In this white paper, learn the different options that are available and which ones fit your process the best.
Durr Systems Inc.
Chemical Processing’s Process Safety eHandbook: Tips for Safer Processing
Major accidents with multiple fatalities continue to occur worldwide in theprocess industries, causing distress to those involved and massive costs to companies. Almost daily, facilities in the process industries face a number of specific major accident hazard scenarios depending upon the nature of the substances they handle and their processing activities. These are caused by known initiating events such as failure of hardware or control systems, or errors by operating or maintenance staff. In this Chemical Processing Process Safety eHandbook, we provide tips for safer processing including:
>> The role of senior management including six important steps senior management should take to insure safer processing
>> Process safety documentation – strategies for ensuring that your documentation is up-to-date and readily accessible
Chemical Hazard Communication
Under the provisions of the Hazard Communication Standard,
employers are responsible for informing employees of the
hazards and the identities of workplace chemicals to which
they are exposed.