This white paper provides some insight into the process for safely implementing Foundation fieldbus in an area of your facility that has a hazardous classification.06/14/2007
Given the amount of effort companies put into process safety management programs, it is important not only that they comply with regulations but that they are truly effective as well. This paper highspots points to check.12/03/2004
Combustible dust explosions are a risk in many areas, but one of the most common locations is the dust collector. This white paper reviews OSHA and NFPA standards, how to identify hazards, and the types of equipment used for explosion protection. It also examines common shortfalls to compliance.09/25/2012
Installing new production processes, or upgrading and expanding existing lines today may also require upgrading your air pollution control system. This white paper specifically focuses on the advantages of using a single direct fire thermal oxidizer and provides a case study example.09/20/2011
OSHAs Hazard Communication Standard (HCS) is based on a simple conceptthat employees have both a need and a right to know the hazards and identities of the chemicals they are exposed to when working.08/30/2005
Safety Instrumented Systems (SIS) are designed to monitor the process and control outputs to prevent or mitigate hazardous events. The design process strives for inherent safety, which is enhanced by applying multiple independent safety layers. Learn how to prevent accidents with prevention layers and minimise the consequences with mitigation layers.05/26/2006
A large number of analytical and highly empirical correlations including monograms reflecting changing standards have been or are being proposed separately for gas and dust explosion relief venting. This white paper provides a generalized formula that is applicable to both gas and dust deflagrations including subsonic and sonic pressure relief conditions and is consistent with available experimental data and industry experience. Application of the model is illustrated for dust explosions. Download now.05/06/2011
Four dust collection system design improvements that can yield significant annual energy cost savings
The design and location of a dust collection systems hood, ducting, collector and fan can collectively add sufficient static pressure requirements to the point where larger, more expensive to operate motors are necessary to maintain effectiveness. Optimizing these areas can make it possible to use smaller, more energy efficient brake horsepower motors.02/19/2007
This 8-page primer describes a method for identification of major acute risks in existing process facilities that can potentially affect on-site and off-site populations and for prioritization of mitigation methods.12/02/2004
Environmental Health and Safety Compliance in Biotech Companies: Common Deficiencies Encountered During Audits
Environmental health and safety (EH&S) compliance programs for companies that house laboratories are complex and not easily maintained. Even the most basic plan involves keeping a variety of permits up-to-date, performing regular employee training, conducting inspections, complying with a myriad of chemical storage and handling requirements, and keeping a number of contingency plans current and complete. This white paper identifies the most common pitfalls and four simple steps to keeping your EH&S program current.09/11/2007
Combustible dust explosions are a risk in many areas of a chemical plant. Are you in compliance? This white paper reviews the OSHA NEP for combustible dust, NFPA standards on explosion hazards, equipment used for explosion protection, and how to avoid the most common shortfalls to compliance.01/27/2014
All of the benefits of Product Lifecycle Management can be erased by significant non-compliance events that impact a company through fines, penalties, negative publicity, or prohibition to sell a new product in key markets. Without a sustainability strategy, the PLM value proposition is at risk.04/07/2011
The dangers posed by combustible dusts are no longer being swept under the rug. Tougher regulations and greater corporate resolve are making dust hazard management an increasingly important topic for every manufacturing sector including the chemical, food and pharmaceutical industries. This Special Report, brought to you by Chemical Processing details the dangers posed by combustible dusts and includes: the latest thinking on both hazard identification and mitigation; it identifies how to mitigate dust hazards in oral solid dosage facilities; it takes an in-depth look at regulations and the thinking behind suppression technologies as a result of past activity; more!04/17/2012
Sponsored By: Parker
Chemical plants vary widely in size and complexity yet share common goals for maximizing efficiency safely and cost effectively. This Chemical Processing Special Report tackles two areas in chemical processing - compressed air systems and powder handling - where gains can be achieved for improving efficiency. We also address the concerns of safety as it relates to drying compressed air in hazardous atmospheres.
- Whether compressed air systems are centrifugal, rotary screw, reciprocating compressors or a combination, this Special Report provides and understanding of what’s involved in getting a suitable supply of compressed air.
- Efficient powder handling can be achieved through optimized humidity management.
- Safe drying practices in hazardous air locations
The U.S. Occupational Safety and Health Administration’s Process Safety Management (PSM) Standard [29 CFR 1910.119(j)] require plant management to identify and address hazards. Further challenging plant management, the mechanical integrity (MI) element of the PSM has been difficult for many facilities to implement. In fact, PSM audits by OSHA have consistently demonstrated that MI accounts for a large number of citations at most facilities. In this Chemical Processing Special Report, we take a look at how to effectively implement strategies to comply with PSM standards including:
- Common piping, hoses and valves hazards – what PHA (Process Handling Analysis) teams should look for to improve the quality of the hazard evaluation
- MI element of PSM – an in-depth look at the stated MI requirements, the perceived interpretation of these requirements and further considerations for identifying your plant’s compliance strategy
- MI implications – the impact MI has on plant’s written procedures, training, inspection & testing, and how equipment deficiencies and quality assurance programs are managed
Chemical makers increasingly are focusing on water-related issues. In particular, concern over availability is spurring leading operating companies to implement a host of novel strategies and technologies to optimize water use. Chemical makers are implementing strategies and solutions to scale back on their overall usage of water, reuse water and put clean water back in to circulation. In this ChemicalProcessing Water Optimization eHandbook we take a look at how chemical companies are dealing with water challenges
Download your copy of this Chemical Processing Water Optimization eHandbook now.06/13/2013
A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.12/03/2004
In dozens of industries and in millions of applications around the world, dangerous chemicals are transferred from their original shipping containers into smaller jugs or buckets or applied to other end-use processes. Historically, the predominant dispensing method in many of these applications has been through an open system where the liquid is poured out of the container. With a poured system, the container is often flipped on its side and the liquid is poured into a secondary container. The user then just carries the bucket to wherever it needs to go. A mental image of this technique quickly reveals its potential dangers and inefficiencies.02/13/2009
Determining the most economical option to control airborne emissions during chemical process operations presents several unique challenges. As with any add-on control system, the goal is to minimize the annualized total costs while maintaining proper operation. In this white paper, learn the different options that are available and which ones fit your process the best.10/19/2009
Increasingly stringent clean air standards and heightened concerns over greenhouse gas emissions are driving technology enhancements in the chemical processing industry. This white paper explains some of the abatement challenges this industry faces and demonstrates how many chemical processors are integrating newer, more efficient emission control technologies for the destruction of Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs).
The paper also includes a case study, demonstrating how one Pure Terephthalic Acid (PTA) plant saved nearly one million dollars by upgrading to a newer thermal oxidizer technology.10/01/2014