Environmental, Health & Safety

on 'Environmental Health & Safety'

21-40 of 48 < first | | | last >
  • Gas And Dust Explosions -- Relief Sizing Formula

    A large number of analytical and highly empirical correlations including monograms reflecting changing standards have been or are being proposed separately for gas and dust explosion relief venting. This white paper provides a generalized formula that is applicable to both gas and dust deflagrations including subsonic and sonic pressure relief conditions and is consistent with available experimental data and industry experience. Application of the model is illustrated for dust explosions. Download now.

    Fauske & Associates
    05/06/2011
  • Guidance note for environmental safety instrumented systems

    Safety Instrumented Systems (SIS) are designed to monitor the process and control outputs to prevent or mitigate hazardous events. The design process strives for inherent safety, which is enhanced by applying multiple independent safety layers. Learn how to prevent accidents with prevention layers and minimise the consequences with mitigation layers.

    P & I Design
    05/26/2006
  • Hazard Communication Guidelines for Compliance

    OSHA’s Hazard Communication Standard (HCS) is based on a simple concept—that employees have both a need and a right to know the hazards and identities of the chemicals they are exposed to when working.

    OSHA
    08/30/2005
  • How Thermal Oxidation Can Increase the Sustainability of a Chemical Plant

    Installing new production processes, or upgrading and expanding existing lines today may also require upgrading your air pollution control system. This white paper specifically focuses on the advantages of using a single direct fire thermal oxidizer and provides a case study example.

    Durr
    09/20/2011
  • Implementing Foundation fieldbus

    This white paper provides some insight into the process for safely implementing Foundation fieldbus in an area of your facility that has a hazardous classification.

    Moore Hawke Fieldbus
    06/14/2007
  • Important facts you should know about drying compressed air in hazardous environments

    Hazardous locations have or could potentially have high concentrations of flammable gases, vapors, combustible dusts, etc. A small spark can lead to a horrific explosion dangerous to equipment and workers in the area. Equipment located in hazardous areas must be specifically designed to prevent ignition and explosion.

    Read this White Paper to learn:

    • Types of hazardous areas
    • Conditions classified as hazardous
    • Hazardous substances
    • Specifications for equipment located in hazardous areas
    • Explosion proof dryers designed for compressed air systems

    Parker
    09/30/2014
  • Improve Plant Safety - A Chemical Processing Special Report

    In chemicals processing, significant hazards exist -- such as those from fire, explosions or toxic release. The processes themselves, the chemicals being processed and the procedures followed, or lack thereof, can all contribute to the risk exposure of these hazards. What can processors do to mitigate these risks? For chemicals processors, it's crucial to implement processes and solutions to detect and prevent these hazards from occurring in the first place.

    Chemical Processing has taken an in-depth look at plant safety -- how to identify the hazards and implement processes and procedures to ensure a safer working environment. This comprehensive Chemical Processing Special Report titled: Improve Plant Safety is now available to download for free.

    12/14/2011
  • Measurement of Oxygen Concentration in Blanketing and Inerting Operations

    Gaseous oxygen measurement with amperometric sensors is the most direct and easiest solution for oxidation and explosion protection.

    Unwelcome oxygen Tank blanketing is the process of filling the headspace in storage vessels and reactors with an inert gas to prevent its contents from exploding, degrading or polymerizing and to protect equipment from corrosion. A blanketing system is normally designed such that it operates under higher than atmospheric pressures, therefore preventing outside air from entering the vessel. As oxygen and moisture in the air can be undesired in numerous processes and applications, blanketing is done in a wide range of industries, varying from (petro)chemical to food and beverage, pharmaceutical to pure water.

    Mettler Toledo
    01/06/2010
  • Permit-Required Confined Spaces

    This new U. S. Occupational Safety and Health Administration paper describes OHSA's confined-space satndard, and discusses how to meet it by controlling hazards, administering entry permits and assigning duties, as well as how to deal with emergencies and OSHA assistance available.

    10/11/2004
  • Process Safety Management

    This guide from the U. S. Occupational Safety and Health Administration covers pre-startup safety review, mechanical integrity, how-work permits, management of change, incident investigation, emergency planning and response and compliance audits, among other topics.

    10/11/2004
  • Raising Confidence and Driving Business Value with Product and REACH Compliance

    Over the past 10 years, manufacturers have faced an increasing number of compliance and product quality challenges, ranging from new regulations to product recalls. This White Paper details the business case for an integrated and comprehensive view of product and REACH compliance processes. If "done right," it is expected that these improvements to the compliance process can not only provide time and cost savings but also open doors to new markets, lower risks associated with complex supply chains, protect the reputation of the brand, and create a foundation for environmental sustainability.

    SAP
    12/14/2010
  • Relief Design for Reactive Systems – Get the Facts

    This 15-page paper focuses on the additional degrees of complexity that reactive systems pose for emergency relief systems. It covers topics such as how to screen for reactivity and what practices, standards and regulations should be followed, as well as a host of other issues.

    12/02/2004
  • Risk-Based Process Safety Design

    Safe design has long been a priority in the process industries. A safe design basis, together with a formal safety management system and safety practices, procedures, and training, is critical for providing that level of confidence required for risk management. The goal of process safety management is to consistently reduce risk to a level that can be tolerated by all concerned. A systematic, risk-based approach to safety design can help eliminate hazards that pose intolerable risk from the process and mitigate the potential consequences of hazards.

    10/22/2004
  • Special Report: Chemical Industry Sees Green

    For years the industry has been “talking green.” But what real strides have been made? Will a Presidential Executive Order compel the industry to speed up efforts to actually go green? While pollution prevention was the original goal of green chemistry, today’s efforts promise to have a substantial economic impact. This Special Report will bring you up to speed on fruitful efforts to “go green” including an update on the growing interest in bio-based feedstocks.

    05/27/2008
  • Taking Toxics Out of the Air

    This 34-page PDF white paper discusses the technology and performance-based standards implemented by the EPA during the last 10 years and how they will assist in removing harmful toxins from the air.

    Enivironmental Protection Agency
    06/28/2005
21-40 of 48 < first | | | last >