Asking The Right Questions About Cartridge Dust Collection
Over the past decade, cartridge-style dust collectors have overtaken baghouses as the preferred technology for dust collection in the chemical processing industry. Combining high efficiency filtration with compact size and reduced pressure drop, a high efficiency cartridge dust collector will in most cases be the system of choice.
Choosing the best cartridge collection system for a given application, however, involves research and attention to detail. This article will review four key areas of investigation. By reviewing these topics with a knowledgeable equipment supplier and knowing the right questions to ask, chemical manufacturing professionals will be better equipped to make informed dust collection decisions. Download this whitepaper now.
Bristol-Myers Squibb Works hard to be a Good Neighbor
Bristol-Myers Squibb manually monitored dissolved oxygen (DO) periodically and ran aeration blowers more than necessary to guard against variable loading rates. After upgrading the system to use online DO monitoring operators now have continuous DO readings in the aeration tanks, substantially reducing energy and maintenance costs.
Carbon Adsorption & Reactivation: Turning Obligation into Opportunity in the Chemical Process Industry
Chemical, petrochemical, and oil-reﬁning plants are process-intensive operations with regulatory requirements to protect the surrounding water and air from the effects of industrial pollution. This paper reviews activated carbon adsorption, the reactivation process, liquid phase and vapor phase adsorption design guidelines, and typical applications of the technology in industrial/environmental treatment.
Case Study: RTOs Leave Nothing to HAPpenstance
In September 1998 the EPA promulgated a ruling in 40 CFR, imposing strict new standards to reduce emissions of toxic air pollutants from the manufacture of pharmaceutical products, including prescription and over-the-counter drugs. The agencys rule was intended to reduce emissions of a number of air toxics and hazardous air pollutants (HAPs), including methylene chloride, methanol, toluene and HCI. It was estimated at the time that the ruling would reduce air toxins annually by approximately 24,000 tons or 65 percent from contemporaneous levels. The affected pharmaceutical manufacturing processes included chemical synthesis (drawing a drugs active ingredient) and chemical formulation (producing a drug in its final form).
Anguil Environmental Systems
Chemical Hazard Communication
Under the provisions of the Hazard Communication Standard,
employers are responsible for informing employees of the
hazards and the identities of workplace chemicals to which
they are exposed.
Systems are becoming more complex. This complexity is changing the nature of the accidents and losses we are experiencing. Process design and process safety are critical considerations in chemical production and processing. With design and safety paramount at the outset of any new development or equipment retrofit, firms can minimize risk exposure, maximize productivity and position themselves to remain compliant and competitive. Advanced automation technologies continue to drive productivity improvements. In this Chemical Processing Improve Plant Safety eHandbook, we provide tips for safer processing including:
The role of senior management including six important steps senior management should take to insure safer processing
Optimizing process safety and efficiency through modern weighing design
The fundamentals of blast-resistant building
Download your copy of this Chemical Processing Improve Plant Safety eHandbook now.
Chemical Processing’s Process Safety eHandbook: Tips for Safer Processing
Major accidents with multiple fatalities continue to occur worldwide in theprocess industries, causing distress to those involved and massive costs to companies. Almost daily, facilities in the process industries face a number of specific major accident hazard scenarios depending upon the nature of the substances they handle and their processing activities. These are caused by known initiating events such as failure of hardware or control systems, or errors by operating or maintenance staff. In this Chemical Processing Process Safety eHandbook, we provide tips for safer processing including:
>> The role of senior management including six important steps senior management should take to insure safer processing
>> Process safety documentation – strategies for ensuring that your documentation is up-to-date and readily accessible
Increasingly stringent clean air standards and heightened concerns over greenhouse gas emissions are driving technology enhancements in the chemical processing industry. This white paper explains some of the abatement challenges this industry faces and demonstrates how many chemical processors are integrating newer, more efficient emission control technologies for the destruction of Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs).
The paper also includes a case study, demonstrating how one Pure Terephthalic Acid (PTA) plant saved nearly one million dollars by upgrading to a newer thermal oxidizer technology.
Choosing the Right Emissions Control Option
Determining the most economical option to control airborne emissions during chemical process operations presents several unique challenges. As with any add-on control system, the goal is to minimize the annualized total costs while maintaining proper operation. In this white paper, learn the different options that are available and which ones fit your process the best.
Durr Systems Inc.
Closed System Technology Drives the Trend Toward Safer, More Cost-Efficient Chemical Dispensing
In dozens of industries and in millions of applications around the world, dangerous chemicals are transferred from their original shipping containers into smaller jugs or buckets or applied to other end-use processes. Historically, the predominant dispensing method in many of these applications has been through an open system where the liquid is poured out of the container. With a poured system, the container is often flipped on its side and the liquid is poured into a secondary container.
The user then just carries the bucket to wherever it needs to go. A mental image of this technique quickly reveals its potential dangers and inefficiencies.
Colder Products Company
Continuous PHA Revalidation
A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.
Chemical makers increasingly are focusing on water-related issues. In particular, concern over availability is spurring leading operating companies to implement a host of novel strategies and technologies to optimize water use. Chemical makers are implementing strategies and solutions to scale back on their overall usage of water, reuse water and put clean water back in to circulation. In this ChemicalProcessing Water Optimization eHandbook we take a look at how chemical companies are dealing with water challenges
Download your copy of this Chemical Processing Water Optimization eHandbook now.
CP Special Report: Hardware Safety
The U.S. Occupational Safety and Health Administration’s Process Safety Management (PSM) Standard [29 CFR 1910.119(j)] require plant management to identify and address hazards. Further challenging plant management, the mechanical integrity (MI) element of the PSM has been difficult for many facilities to implement. In fact, PSM audits by OSHA have consistently demonstrated that MI accounts for a large number of citations at most facilities. In this Chemical Processing Special Report, we take a look at how to effectively implement strategies to comply with PSM standards including:
Common piping, hoses and valves hazards – what PHA (Process Handling Analysis) teams should look for to improve the quality of the hazard evaluation
MI element of PSM – an in-depth look at the stated MI requirements, the perceived interpretation of these requirements and further considerations for identifying your plant’s compliance strategy
MI implications – the impact MI has on plant’s written procedures, training, inspection & testing, and how equipment deficiencies and quality assurance programs are managed
Chemical plants vary widely in size and complexity yet share common goals for maximizing efficiency safely and cost effectively. This Chemical Processing Special Report tackles two areas in chemical processing - compressed air systems and powder handling - where gains can be achieved for improving efficiency. We also address the concerns of safety as it relates to drying compressed air in hazardous atmospheres.
Whether compressed air systems are centrifugal, rotary screw, reciprocating compressors or a combination, this Special Report provides and understanding of what’s involved in getting a suitable supply of compressed air.
Efficient powder handling can be achieved through optimized humidity management.
Safe drying practices in hazardous air locations
Dangers Lie in the Dust - A Chemical Processing Special Report
The dangers posed by combustible dusts are no longer being swept under the rug. Tougher regulations and greater corporate resolve are making dust hazard management an increasingly important topic for every manufacturing sector including the chemical, food and pharmaceutical industries.
This Special Report, brought to you by Chemical Processing details the dangers posed by combustible dusts and includes:
the latest thinking on both hazard identification and mitigation; it identifies how to mitigate dust hazards in oral solid dosage facilities; it takes an in-depth look at regulations and the thinking behind suppression technologies as a result of past activity; more!
Designing Sustainable Products
All of the benefits of Product Lifecycle Management can be erased by significant non-compliance events that impact a company through fines, penalties, negative publicity, or prohibition to sell a new product in key markets. Without a sustainability strategy, the PLM value proposition is at risk.
Dust Collection System Complies with Combustible Dust Standards
Combustible dust explosions are a risk in many areas of a chemical plant. Are you in compliance? This white paper reviews the OSHA NEP for combustible dust, NFPA standards on explosion hazards, equipment used for explosion protection, and how to avoid the most common shortfalls to compliance.
Camfil Air Pollution Control
Environmental Health and Safety Compliance in Biotech Companies: Common Deficiencies Encountered During Audits
Environmental health and safety (EH&S) compliance programs for companies that house laboratories are complex and not easily maintained. Even the most basic plan involves keeping a variety of permits up-to-date, performing regular employee training, conducting inspections, complying with a myriad of chemical storage and handling requirements, and keeping a number of contingency plans current and complete. This white paper identifies the most common pitfalls and four simple steps to keeping your EH&S program current.
Environmental Health and Engineering
Facility Major Risk Survey
This 8-page primer describes a method for identification of major acute risks in existing process facilities that can potentially affect on-site and off-site populations and for prioritization of mitigation methods.