Environmental, Health & Safety

on 'Environmental Health & Safety'

1-20 of 48 < first | prev | | last >
  • Why Process Safety Management Audits Fail

    Most companies have completed at least three process safety management(PSM) compliance audits of their covered facilities since the promulgation of the OSHA PSM standard. These companies, however, are not seeing noticeable improvements in their PSM programs. In fact, many companies feel that their PSM programs have become less effective. What has happened and why? Are there any lessons learned from the Enron collapse and its auditing program? What needs to be done?

  • White Paper: Understanding the Risks Associated with FIBCs and Electrostatic Hazards

    Flexible Intermediate Bulk Containers (FIBCs) have found their niche in the worldwide transportation of powdered, flaked and granulated products. FIBCs are typically made of woven plastic with some type of liner insert and are often referred to as super sacks, big bags or bulk bags in industry. During filling and emptying of FIBCs there is a steady accumulation of static charge that can result in electrostatic discharges from the FIBC. This may in turn provide sufficient energy for ignition of combustible particulate solids or flammable vapors, not to mention unsettling shocks to nearby personnel. In this white paper we review the NFPA 654 Standard for the Prevention of Fire and Dust Explosions from Combustible Particulate Solids and the importance of why identifying the Minimum Ignition Energy (MIE) of your combustible dust or flammable vapor is a necessary component for selecting the correct FIBC Type for your application. Download now.

    Fauske & Associates
  • Understanding Regulated Health and Safety Standards--Part 1

    This paper provides the viewpoint of the American Conference of Governmental Industrial Hygienists (ACGIH), a private not-for-profit, non-governmental corporation open to all industrial hygienists or other occupational health and safety professionals. The authors have the opinion that there are misunderstandings about the use of regulated health and safety standards. In part one of this article, they provide some information on how regulations are formed and advice on using these values to conduct business. Employers and employees need this fundamental understanding to make informed health and safety decisions. This information is also useful for guiding public decisions about everyday toxic exposures.

  • Understanding Dust Explosion Dangers

    The unfortunate propensity of dust explosions to destroy entire facilities and claim lives is very real. Powder handling processes often are comprised of interconnected enclosures and equipment. Flame and pressure resulting from a dust explosion can therefore propagate through piping, across galleries, and reach other pieces of equipment or enclosures, leading to extensive damage. In this Chemical Processing Special Report, we take a look at the latest NFPA standards and dust explosion mitigation strategies. This Special Report covers:

    • Significant revisions to dust explosion standards – NFPA 654 major changes include new administrative requirements
    • How to defuse dust dangers - carefully consider and then counter risks of fire and explosion
    • Five common dust explosion misconceptions that can lead to a false sense of security

    Prepare your facility against potential dust explosion dangers. Download your copy of this Chemical Processing Special Report now.

  • Understand the hazards of flammable liquid spills

    This short paper discusses the risks of flash fires and pool fires from spills of flammable liquids, preventative measures, as well as how to avoid hazards during the clean up of such spills.

    Chilworth Technology
  • The Regional Transport of Ozone

    EPA tracks emissions of six principal air pollutants - carbon monoxide, lead, nitrogen oxides, particulate matter, sulfur dioxide, and volatile organic compounds. All have decreased significantly since passage of the Clean Air Act in 1970 - except for nitrogen oxides.

  • The Green Solution

    The ever present emphasis on technological efficiency is just one of several forces behind the pressure on companies to "go green" despite a trying economy. The ultimate criterion that determines whether a motor is truly green is energy efficiency. Technology, long the key to efficiency, can help resolve this issue.

    PdMA Corp.
  • Taking Toxics Out of the Air

    This 34-page PDF white paper discusses the technology and performance-based standards implemented by the EPA during the last 10 years and how they will assist in removing harmful toxins from the air.

    Enivironmental Protection Agency
  • Special Report: Chemical Industry Sees Green

    For years the industry has been “talking green.” But what real strides have been made? Will a Presidential Executive Order compel the industry to speed up efforts to actually go green? While pollution prevention was the original goal of green chemistry, today’s efforts promise to have a substantial economic impact. This Special Report will bring you up to speed on fruitful efforts to “go green” including an update on the growing interest in bio-based feedstocks.

  • Risk-Based Process Safety Design

    Safe design has long been a priority in the process industries. A safe design basis, together with a formal safety management system and safety practices, procedures, and training, is critical for providing that level of confidence required for risk management. The goal of process safety management is to consistently reduce risk to a level that can be tolerated by all concerned. A systematic, risk-based approach to safety design can help eliminate hazards that pose intolerable risk from the process and mitigate the potential consequences of hazards.

  • Relief Design for Reactive Systems – Get the Facts

    This 15-page paper focuses on the additional degrees of complexity that reactive systems pose for emergency relief systems. It covers topics such as how to screen for reactivity and what practices, standards and regulations should be followed, as well as a host of other issues.

  • Raising Confidence and Driving Business Value with Product and REACH Compliance

    Over the past 10 years, manufacturers have faced an increasing number of compliance and product quality challenges, ranging from new regulations to product recalls. This White Paper details the business case for an integrated and comprehensive view of product and REACH compliance processes. If "done right," it is expected that these improvements to the compliance process can not only provide time and cost savings but also open doors to new markets, lower risks associated with complex supply chains, protect the reputation of the brand, and create a foundation for environmental sustainability.

  • Process Safety Management

    This guide from the U. S. Occupational Safety and Health Administration covers pre-startup safety review, mechanical integrity, how-work permits, management of change, incident investigation, emergency planning and response and compliance audits, among other topics.

  • Permit-Required Confined Spaces

    This new U. S. Occupational Safety and Health Administration paper describes OHSA's confined-space satndard, and discusses how to meet it by controlling hazards, administering entry permits and assigning duties, as well as how to deal with emergencies and OSHA assistance available.

  • Measurement of Oxygen Concentration in Blanketing and Inerting Operations

    Gaseous oxygen measurement with amperometric sensors is the most direct and easiest solution for oxidation and explosion protection.

    Unwelcome oxygen Tank blanketing is the process of filling the headspace in storage vessels and reactors with an inert gas to prevent its contents from exploding, degrading or polymerizing and to protect equipment from corrosion. A blanketing system is normally designed such that it operates under higher than atmospheric pressures, therefore preventing outside air from entering the vessel. As oxygen and moisture in the air can be undesired in numerous processes and applications, blanketing is done in a wide range of industries, varying from (petro)chemical to food and beverage, pharmaceutical to pure water.

    Mettler Toledo
  • Improve Plant Safety - A Chemical Processing Special Report

    In chemicals processing, significant hazards exist -- such as those from fire, explosions or toxic release. The processes themselves, the chemicals being processed and the procedures followed, or lack thereof, can all contribute to the risk exposure of these hazards. What can processors do to mitigate these risks? For chemicals processors, it's crucial to implement processes and solutions to detect and prevent these hazards from occurring in the first place.

    Chemical Processing has taken an in-depth look at plant safety -- how to identify the hazards and implement processes and procedures to ensure a safer working environment. This comprehensive Chemical Processing Special Report titled: Improve Plant Safety is now available to download for free.

  • Important facts you should know about drying compressed air in hazardous environments

    Hazardous locations have or could potentially have high concentrations of flammable gases, vapors, combustible dusts, etc. A small spark can lead to a horrific explosion dangerous to equipment and workers in the area. Equipment located in hazardous areas must be specifically designed to prevent ignition and explosion.

    Read this White Paper to learn:

    • Types of hazardous areas
    • Conditions classified as hazardous
    • Hazardous substances
    • Specifications for equipment located in hazardous areas
    • Explosion proof dryers designed for compressed air systems

1-20 of 48 < first | prev | | last >