Environmental, Health & Safety

on 'Environmental Health & Safety'

1-20 of 48 < first | prev | | last >
  • Understanding Dust Explosion Dangers

    The unfortunate propensity of dust explosions to destroy entire facilities and claim lives is very real. Powder handling processes often are comprised of interconnected enclosures and equipment. Flame and pressure resulting from a dust explosion can therefore propagate through piping, across galleries, and reach other pieces of equipment or enclosures, leading to extensive damage. In this Chemical Processing Special Report, we take a look at the latest NFPA standards and dust explosion mitigation strategies. This Special Report covers:
     

    • Significant revisions to dust explosion standards – NFPA 654 major changes include new administrative requirements
    • How to defuse dust dangers - carefully consider and then counter risks of fire and explosion
    • Five common dust explosion misconceptions that can lead to a false sense of security

    Prepare your facility against potential dust explosion dangers. Download your copy of this Chemical Processing Special Report now.

    12/17/2013
  • Process Safety Management

    This guide from the U. S. Occupational Safety and Health Administration covers pre-startup safety review, mechanical integrity, how-work permits, management of change, incident investigation, emergency planning and response and compliance audits, among other topics.

    10/11/2004
  • Beyond the Resource Conservation and Recovery Act

    The EPA provides a vision of where waste and materials management is headed in 2020, covering issues like sustainable use of resources and the life-cycle approach to managing chemical risk.

    10/11/2004
  • Continuous PHA Revalidation

    A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.

    12/03/2004
  • Relief Design for Reactive Systems – Get the Facts

    This 15-page paper focuses on the additional degrees of complexity that reactive systems pose for emergency relief systems. It covers topics such as how to screen for reactivity and what practices, standards and regulations should be followed, as well as a host of other issues.

    12/02/2004
  • Risk-Based Process Safety Design

    Safe design has long been a priority in the process industries. A safe design basis, together with a formal safety management system and safety practices, procedures, and training, is critical for providing that level of confidence required for risk management. The goal of process safety management is to consistently reduce risk to a level that can be tolerated by all concerned. A systematic, risk-based approach to safety design can help eliminate hazards that pose intolerable risk from the process and mitigate the potential consequences of hazards.

    10/22/2004
  • Permit-Required Confined Spaces

    This new U. S. Occupational Safety and Health Administration paper describes OHSA's confined-space satndard, and discusses how to meet it by controlling hazards, administering entry permits and assigning duties, as well as how to deal with emergencies and OSHA assistance available.

    10/11/2004
  • Understanding Regulated Health and Safety Standards--Part 1

    This paper provides the viewpoint of the American Conference of Governmental Industrial Hygienists (ACGIH), a private not-for-profit, non-governmental corporation open to all industrial hygienists or other occupational health and safety professionals. The authors have the opinion that there are misunderstandings about the use of regulated health and safety standards. In part one of this article, they provide some information on how regulations are formed and advice on using these values to conduct business. Employers and employees need this fundamental understanding to make informed health and safety decisions. This information is also useful for guiding public decisions about everyday toxic exposures.

    10/22/2004
  • Special Report: Chemical Industry Sees Green

    For years the industry has been “talking green.” But what real strides have been made? Will a Presidential Executive Order compel the industry to speed up efforts to actually go green? While pollution prevention was the original goal of green chemistry, today’s efforts promise to have a substantial economic impact. This Special Report will bring you up to speed on fruitful efforts to “go green” including an update on the growing interest in bio-based feedstocks.

    05/27/2008
  • Improve Plant Safety - A Chemical Processing Special Report

    In chemicals processing, significant hazards exist -- such as those from fire, explosions or toxic release. The processes themselves, the chemicals being processed and the procedures followed, or lack thereof, can all contribute to the risk exposure of these hazards. What can processors do to mitigate these risks? For chemicals processors, it's crucial to implement processes and solutions to detect and prevent these hazards from occurring in the first place.

    Chemical Processing has taken an in-depth look at plant safety -- how to identify the hazards and implement processes and procedures to ensure a safer working environment. This comprehensive Chemical Processing Special Report titled: Improve Plant Safety is now available to download for free.

    12/14/2011
  • CP eHandbook: Step Up Water Conservation

    Chemical makers increasingly are focusing on water-related issues. In particular, concern over availability is spurring leading operating companies to implement a host of novel strategies and technologies to optimize water use. Chemical makers are implementing strategies and solutions to scale back on their overall usage of water, reuse water and put clean water back in to circulation. In this ChemicalProcessing Water Optimization eHandbook we take a look at how chemical companies are dealing with water challenges

    Download your copy of this Chemical Processing Water Optimization eHandbook now.

    06/13/2013
  • Chemical Processing’s Process Safety eHandbook: Tips for Safer Processing

    Major accidents with multiple fatalities continue to occur worldwide in theprocess industries, causing distress to those involved and massive costs to companies. Almost daily, facilities in the process industries face a number of specific major accident hazard scenarios depending upon the nature of the substances they handle and their processing activities. These are caused by known initiating events such as failure of hardware or control systems, or errors by operating or maintenance staff. In this Chemical Processing Process Safety eHandbook, we provide tips for safer processing including:

    >> The role of senior management including six important steps senior management should take to insure safer processing

    >> Process safety documentation – strategies for ensuring that your documentation is up-to-date and readily accessible

    09/19/2013
  • Chemical Processing’s eHandbook: Improve Plant Safety

    Systems are becoming more complex. This complexity is changing the nature of the accidents and losses we are experiencing. Process design and process safety are critical considerations in chemical production and processing. With design and safety paramount at the outset of any new development or equipment retrofit, firms can minimize risk exposure, maximize productivity and position themselves to remain compliant and competitive. Advanced automation technologies continue to drive productivity improvements. In this Chemical Processing Improve Plant Safety eHandbook, we provide tips for safer processing including:

    • The role of senior management including six important steps senior management should take to insure safer processing
    • Optimizing process safety and efficiency through modern weighing design
    • The fundamentals of blast-resistant building 

    Download your copy of this Chemical Processing Improve Plant Safety eHandbook now.

    10/22/2014
  • Choosing the Correct Emission Control Technology

    Increasingly stringent clean air standards and heightened concerns over greenhouse gas emissions are driving technology enhancements in the chemical processing industry. This white paper explains some of the abatement challenges this industry faces and demonstrates how many chemical processors are integrating newer, more efficient emission control technologies for the destruction of Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs).

    The paper also includes a case study, demonstrating how one Pure Terephthalic Acid (PTA) plant saved nearly one million dollars by upgrading to a newer thermal oxidizer technology.

    Anguil
    10/01/2014
  • Case Study: RTOs Leave Nothing to HAPpenstance

    In September 1998 the EPA promulgated a ruling in 40 CFR, imposing strict new standards to reduce emissions of toxic air pollutants from the manufacture of pharmaceutical products, including prescription and over-the-counter drugs. The agency’s rule was intended to reduce emissions of a number of air toxics and hazardous air pollutants (HAPs), including methylene chloride, methanol, toluene and HCI. It was estimated at the time that the ruling would reduce air toxins annually by approximately 24,000 tons or 65 percent from contemporaneous levels. The affected pharmaceutical manufacturing processes included chemical synthesis (drawing a drug’s active ingredient) and chemical formulation (producing a drug in its final form).

    Anguil Environmental Systems
    07/21/2008
  • Carbon Adsorption & Reactivation: Turning Obligation into Opportunity in the Chemical Process Industry

    Chemical, petrochemical, and oil-refining plants are process-intensive operations with regulatory requirements to protect the surrounding water and air from the effects of industrial pollution. This paper reviews activated carbon adsorption, the reactivation process, liquid phase and vapor phase adsorption design guidelines, and typical applications of the technology in industrial/environmental treatment.

    Calgon Carbon
    06/20/2012
  • Asking The Right Questions About Cartridge Dust Collection

    Over the past decade, cartridge-style dust collectors have overtaken baghouses as the preferred technology for dust collection in the chemical processing industry. Combining high efficiency filtration with compact size and reduced pressure drop, a high efficiency cartridge dust collector will in most cases be the system of choice.

    Choosing the best cartridge collection system for a given application, however, involves research and attention to detail. This article will review four key areas of investigation. By reviewing these topics with a knowledgeable equipment supplier and knowing the right questions to ask, chemical manufacturing professionals will be better equipped to make informed dust collection decisions. Download this whitepaper now.

    Camfil Farr
    06/21/2010
1-20 of 48 < first | prev | | last >