This paper reviews the basic techniques for dynamic modeling of these two key operations. It covers considerations related to heat transfer, reaction chemistry, mass balances and the control system. It also discusses equipment configurations, performance characteristics and operational constraints.09/08/2004
This paper covers key aspects for modeling and design of batch reactors, including: heat-up and cool-down performance, sensitivity analysis for reactor parameters, boil-up rate predictions, thermal stability under exothermic conditions, control system design and loop tuning parameters, condenser rating, and process emissions predictions.10/11/2004
Shell-and-tube heat exchangers are widely used throughout the chemical industry. This paper provides a review of the key issues involved in their thermal design. It covers both process and mechanical issues, and discusses appropriate methods for determining various parameters.10/11/2004
This eight-page paper provides design recommendations that apply to both low- and high-viscosity two-phase flow systems. It suggests specific modeling approaches for different aspects of the design.12/03/2004
This 37-page paper reviews the basic techniques for process modelling and control of batch reaction systems under steady state and dynamic conditions.07/25/2005
This 25-page paper discusses the basic design, construction and performance of shell and tube heat exchangers.10/25/2005
This 25-page paper discusses the importance of achieving stable and reproducible operating conditions in batch reactors.12/21/2005
Developing Operating Procedures For Projects Involving Multiple Organizations Using a Linear Responsibility Chart
One of the difficulties of managing projects that involve several (perhaps many) organizations is that the group has no pre-established procedures for handling actions that cross organizational boundaries. This white paper by Project Success Incorporated discusses the development of a procedures manual.02/25/2008
This 30-page paper discusses the basic design, construction and performance of shell and tube heat exchangers.10/22/2008
Read about the 10 factors that will impact the design, construction and operation of these next-generation pilot plant units.
Learn about new pilot plant development methods.
Understand the role operational guidance plays in successful pilot plant development.06/29/2009
The pressure of international competition is being felt in the field of plant engineering with a demand for shorter development times and reduced project costs. A consistent and efficient approach to plant design can help to dramatically save both time and money. Download this white paper to learn more.08/18/2010
Welded vessels play a key role in most processes. However, few plants now have in-depth expertise in materials selection, fabrication and design of such vessels. As a result, plant staff often make errors that can be costly as well as compromise the suitability and life of the vessel. This three-part special report provides practical pointers that can help you avoid common mistakes and get the most appropriate, durable and cost-effective vessel.
- Part 1 looks at a dozen important factors to consider in materials selection, including metal selection and appropriate use of corrosion allowances and coatings. It includes pointers gleaned from first-hand experiences that can help you avoid costly mistakes and delays.
- Part 2 provides tips on how to avoid delays and achieve savings in the fabrication process. It also covers techniques that can improve vessel reliability and thus forestall costly repairs down the road.
- Part 3 gets into design issues. It condenses the 5,000+ pages of the ASME Boiler and Pressure Vessel Code into a simple guide when specifying vessels, heat exchangers and tanks. It focuses on 10 key factors.
Download your Chemical Processing special report now.10/28/2014
The phrase “Vacuum Cleaning System” refers not only to cleaning by means of vacuum hose and tools, but also to a multitude of tasks which can be accomplished by the same basic system components: a vacuum producer and separators. In this paper, we cover the vacuum cleaning system as a tool for good housekeeping. Such a system is generally designed to pick up and convey dry and free-flowing material that can enter and pass through the vacuum cleaning tool and hose. Further, the system is designed to allow for a selected number of operators.02/24/2015
Determining what plastic tubing is best for an application can be a challenge. This report includes topics such as ingredients, temperatures, pressure and vacuum requirements, and flexibility to assist engineers and buyers with tubing and hose selection. Helps avoid costly purchasing errors.04/14/2015
1-14 of 14 < | | | >
1-14 of 14 < | | | >