Process Engineering White Papers

81-100 of 128 < first | | | last >
  • Why WirelessHART? The Right Standard at the Right Time

    The WirelessHART standard provides a robust wireless protocol for the full range of process measurement, control and asset management applications. Based on the proven and familiar HART protocol, it enables users to quickly and easily gain the benefits of wireless technology while maintaining compatibility with existing devices, tools and systems.

    HART Communication Foundation
    11/16/2007
  • Design Considerations for High Liquid Rate Tray Applications

    Except for a few odd services, high liquid rate applications are typically the domain of either trays or random packings. Aside from the distributors, random packing designs are rather straightforward with the designer choosing the proper size to accommodate the fluid flow rates and achieve the desired efficiency. Trays, on the other hand, have a large variety of adjustable parameters and can be especially complex, especially when designed for high liquid rate applications.

    Sulzer Chemtech USA, Inc.
    09/17/2007
  • Implementing Foundation fieldbus

    This white paper provides some insight into the process for safely implementing Foundation fieldbus in an area of your facility that has a hazardous classification.

    Moore Hawke Fieldbus
    06/14/2007
  • Applying ISA-S88 to Software Migration Engineering

    Dow Chemical maintains thousands of batch control systems world-wide built on its proprietary MOD 5 computer system. Over decades, they have been meticulous to preserve and enhance these systems. Dow intends to preserve and reap the rewards of this diligence by developing reverse engineering best practices and tools to migrate this intellectual property to next-generation platforms.

    Dow Chemical
    07/12/2006
  • Managing Complex Equipment Status in a GMP Environment

    Batch manufacturing systems must maintain the status of equipment, including which are available, dirty, out of service, etc. In industries that enforce Good Manufacturing Practices (GMPs), additional status types and values for process equipment must be maintained. Rules associated with the equipment status can be complex and involve the equipment class, current equipment state and time in the current state. This paper covers the operator interface used to review the equipment status and the interlocking requirements between the recipe and batch phases based on multiple status types.

    Honeywell
    06/13/2006
  • Cybersecurity: Power Industry Locks Down

    The power industry is susceptible to a variety of cyber threats, which can wreak havoc on control systems. Management, engineering and IT must commit to a comprehensive approach that encompasses threat prevention, detection and elimination.

    Power Engineering
    03/27/2006
  • Process Control Network Security

    This document provides an understanding of intrusion detection and prevention systems, why they are necessary, how and where they fit in the control system environment, and gives example scenarios.

    Invensys
    03/27/2006
  • Fieldbus and remote I/O system comparison

    Nine manufacturers participated in the FuRIOS study, which was conduced under the lead of an end user company that compared its use of fieldbus and remote I/O in full detail.

    Aventis, Infraserv GmbH
    02/10/2006
  • Aseptic PAT and Particle Monitoring

    In this white paper, Mark Hallworth, pharmaceutical manager for Particle Measuring Systems, discusses continuous monitoring methods, how they’re evolving, and why they’re important.

    Particle Measuring Systems
    02/06/2006
  • Process Control Network Security - Reference Architecture

    This document describes best practices for the reference architecture for a process control system network and its interfaces to a corporate network. The paper’s objective is to give the reader an understanding of the techniques utilized to securely connect these networks.

    Invensys
    01/11/2006
  • Clean Compressed Air

    Good air preparation should consider the energy consumption of the system and air treatment equipment.

    Norgren
    11/27/2005
  • Accurate liquid phase density on aerated liquids

    This white paper discusses SONAR-based, clamp-on gas volume fraction meters which recently have been introduced to the industry that provide an accurate, real time, measurement of entrained gases. Coupling entrained gas volume fraction monitor with most types of process density meters, enables accurate determination of liquid and the liquid-solid components of aerated mixtures.

    10/18/2005
  • Specifying industrial fieldbus networks for automation

    Automation designers face many challenges and tradeoffs in the development of a successful network solution. This white paper discusses the necessary choices in selecting a network technology appropriate for various specific applications.

    Texas Instruments
    10/12/2005
  • Measurement Best Practices

    This 9-page PDF discusses way in which you can ensure your measurements are accurate, repeatable and reliable.

    Rosemount
    10/05/2005
  • Energy Efficiency - The Other Alternative Fuel

    Proven methods for industry to reduce energy consumption and environmental impact are already at hand. These cost-effective solutions promise substantial return-on-investment now and in the future, without sacrificing performance or quality. For most companies and organizations, the answers to maintaining a competitive edge in this era of rising energy costs are readily available. By applying a suite of cost-effective power and automation solutions from technology leaders like ABB, these facilities can achieve substantial energy savings today without waiting for the "alternative fuels" of the future.

    ABB
    09/27/2005
  • Securing Process Control Network External Communications

    In the real world, sharing PCN data with external systems and accessing PCN systems from external sources is fast becoming a business necessity. This paper provides some generic guidelines for enabling secure connectivity between PCNs and external systems.

    Honeywell
    09/16/2005
81-100 of 128 < first | | | last >