Ziegler-Nichols Tuning Rules And Limitations
The standard reference for PID tuning seems to be the Ziegler-Nichols tuning rules developed in 1942 on a pneumatic controller. Here is how to tune a controller using these rules.
Achieve 21 CFR Part 11 Compliance
This technical white paper discusses Yokogawas CENTUM CS 3000 R3 DCS (Distributed Control System) product and the extent of its compliance with Part 11 of Title 21 of the Code of Federal Regulations (21 CFR Part 11), the Electronic Records/Electronic Signatures Rule.
Succeed at Alarm Management
Today's control system make it easy to add alarms. The result has been a proliferation of alarms that can overwhelm an operator and actually obscure situations that really require immediate attention. This paper provides practical guidance on effective procedures that can significantly reduce nuisance alarms and improve operator effectiveness.
D. Shook, PhD, P.Eng., Matrikon, Inc.
Succeed at Dynamic Modeling of Batch Reactors and Batch Distillation
This paper reviews the basic techniques for dynamic modeling of these two key operations. It covers considerations related to heat transfer, reaction chemistry, mass balances and the control system. It also discusses equipment configurations, performance characteristics and operational constraints.
Selecting Transmitters for Safety Instrumented Systems
This paper presents best practices that allow the user to quantify the impact of real-world failure causes and to take credit for improvements in system design. Besides selection, it also covers installation and maintenance.