Process Engineering White Papers

41-60 of 67 < first | | | last >
  • Heating Water by Direct Steam Injection

    Direct steam injection provides a solution where large volumes of hot water at precise temperatures are required, and saving space and energy are factors in the system design.

    Pick Heaters
    05/03/2012
  • Chemical Processing Special Report: Make the Most of Water

    Chemical Processing has taken an in-depth look at just industrial wastewater -- how it is used, processed and potential management and compiled a comprehensive Special Report titled: Make the Most of Water. This informative Special Report covers such topics as:
    • Is water the new carbon -- what path will regulating water take
    • How to optimize water use
    • Micropollutants -- defining, managing, and communicating potential risk
    • More!
    Download your copy.

    11/28/2011
  • Designing Sustainable Products

    All of the benefits of Product Lifecycle Management can be erased by significant non-compliance events that impact a company through fines, penalties, negative publicity, or prohibition to sell a new product in key markets. Without a sustainability strategy, the PLM value proposition is at risk.

    IHS
    04/07/2011
  • Special Report: Heat Transfer Fluids: Do's, Don'ts, and Best Practices

    Heat transfer fluids -- from mineral oils to synthetic and organic-based formulas -- are the lifeblood of many critical operations within the process industries. This special, interactive PDF looks at how plant personnel can better understand various fluids and fluid properties, and track the performance of their entire heat transfer system.

    03/21/2011
  • Chemical Processing Special Report: Beyond Condition Monitoring: Prevent Failures through Condition Management

    For years chemicals makers have tracked the health of key equipment yet they still grapple with unplanned outages that can significantly impact financial performance through lost production and extra repair costs. In this Special Report, we'll explore underlying condition monitoring challenges and introduce the concept of condition management -- an enhanced approach that helps companies reap the full benefit from their condition monitoring investments; we'll also discuss how CMMS tools can help to provide a clear understanding of maintenance operations performance as well as provide some guidance on what you can expect from a CMMS vendor. Lastly, listen to the lively discussion between Chemical Processing's Senior Digital Editor,Traci Purdum, and Edgewater Fullscope's Senior Vice President, Russell Smith, as they converse on how ERP can help manage the supply chain.

    Edgewater Fullscope
    12/16/2010
  • Chemical and Pharmaceutical Sight Glass Application Handbook

    20-page Sight Glass Application Handbook is a convenient reference for experienced engineers and a great primer for those new to sight glass selection. It offers a full overview of sight glasses for chemical processes, including types of glass, construction, lighting, installation and maintenance.

    09/20/2010
  • How Automated Water Jetting Improves Tube Bundle Cleaning Efficiency

    Heat exchanger efficiency is a critical factor in processing productivity, and tube bundles must be kept clear of deposits to maintain that efficiency. Automated high-pressure water jetting systems, with flexible or rigid lances, remove deposits 75% to 90% faster than manual methods and are more operator-friendly.

    NLB Corp.
    12/14/2009
  • Design Considerations for High Liquid Rate Tray Applications

    Except for a few odd services, high liquid rate applications are typically the domain of either trays or random packings. Aside from the distributors, random packing designs are rather straightforward with the designer choosing the proper size to accommodate the fluid flow rates and achieve the desired efficiency. Trays, on the other hand, have a large variety of adjustable parameters and can be especially complex, especially when designed for high liquid rate applications.

    Sulzer Chemtech USA, Inc.
    09/17/2007
  • Pitfalls of pump piping

    This white paper goes over the three major problems associated with poor pump piping and provides five rules to follow in order to avoid future pitfalls.

    Ross Mackay Associates Ltd.
    06/14/2007
  • Oxygen in cell culture/venting ozonated vessels

    This white paper outlines trends and opportunities for gasket standardization in processing plants ... including the potential for more reliable sealing, cost savings, inventory reduction, easier installation and safety practices. Steps are outlined for achieving success in gasket standardization across steel, glass-lined and FRP piping.

    W. L. Gore & Associates, Inc.
    10/18/2006
  • V-Cone flow meter test results | Chemical Processing

    The American Petroleum Institute Manual of Petroleum Measurement Standards published the results of flow meter tests at the Southwest Research Institute and Utah State University.

    Southwest Research Institute
    03/21/2006
  • Continuous imaging fluid particle analysis: A Primer

    This paper looks at the issues associated with fluid particle analysis, discusses some of the historical methods used, and introduces a new technology: the continuous imaging fluid particle analyzer.

    Fluid Imaging Technologies
    11/14/2005
  • Accurate liquid phase density on aerated liquids

    This white paper discusses SONAR-based, clamp-on gas volume fraction meters which recently have been introduced to the industry that provide an accurate, real time, measurement of entrained gases. Coupling entrained gas volume fraction monitor with most types of process density meters, enables accurate determination of liquid and the liquid-solid components of aerated mixtures.

    10/18/2005
  • Electro-hydraulic system design: Making the right system choices

    Designers who understand and can take advantage of the differences between fluid power and traditional electromechanical power can build machines that produce higher quality output with lower lifecycle costs. This white paper suggests that care must be taken, however, in selecting and sizing the hydraulic system elements and in tuning the motion controller for optimal performance.

    Delta Computer Systems
    08/16/2005
  • Technology expands flowmeter capabilities, reduces costs

    Capacitance-type magnetic flowmeters have traditionally offered the advantage of having non-wetted electrodes and the ability to measure low conductivity fluids. However, they suffered from a sensitivity to flow noise and zero instability. Innovative technology overcomes these limitations and drives magnetic flowmeters into new areas of application, while reducing installed costs.

    Yokogawa
    07/18/2005
  • Bearing isolators 101

    A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they don’t separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.

    Inpro
    05/17/2005
41-60 of 67 < first | | | last >