Process Engineering White Papers

41-60 of 75 < first | | | last >
  • Why WirelessHART? The Right Standard at the Right Time

    The WirelessHART standard provides a robust wireless protocol for the full range of process measurement, control and asset management applications. Based on the proven and familiar HART protocol, it enables users to quickly and easily gain the benefits of wireless technology while maintaining compatibility with existing devices, tools and systems.

    HART Communication Foundation
    11/16/2007
  • Design Considerations for High Liquid Rate Tray Applications

    Except for a few odd services, high liquid rate applications are typically the domain of either trays or random packings. Aside from the distributors, random packing designs are rather straightforward with the designer choosing the proper size to accommodate the fluid flow rates and achieve the desired efficiency. Trays, on the other hand, have a large variety of adjustable parameters and can be especially complex, especially when designed for high liquid rate applications.

    Sulzer Chemtech USA, Inc.
    09/17/2007
  • Implementing Foundation fieldbus

    This white paper provides some insight into the process for safely implementing Foundation fieldbus in an area of your facility that has a hazardous classification.

    Moore Hawke Fieldbus
    06/14/2007
  • Applying ISA-S88 to Software Migration Engineering

    Dow Chemical maintains thousands of batch control systems world-wide built on its proprietary MOD 5 computer system. Over decades, they have been meticulous to preserve and enhance these systems. Dow intends to preserve and reap the rewards of this diligence by developing reverse engineering best practices and tools to migrate this intellectual property to next-generation platforms.

    Dow Chemical
    07/12/2006
  • Managing Complex Equipment Status in a GMP Environment

    Batch manufacturing systems must maintain the status of equipment, including which are available, dirty, out of service, etc. In industries that enforce Good Manufacturing Practices (GMPs), additional status types and values for process equipment must be maintained. Rules associated with the equipment status can be complex and involve the equipment class, current equipment state and time in the current state. This paper covers the operator interface used to review the equipment status and the interlocking requirements between the recipe and batch phases based on multiple status types.

    Honeywell
    06/13/2006
  • Cybersecurity: Power Industry Locks Down

    The power industry is susceptible to a variety of cyber threats, which can wreak havoc on control systems. Management, engineering and IT must commit to a comprehensive approach that encompasses threat prevention, detection and elimination.

    Power Engineering
    03/27/2006
  • Process Control Network Security

    This document provides an understanding of intrusion detection and prevention systems, why they are necessary, how and where they fit in the control system environment, and gives example scenarios.

    Invensys
    03/27/2006
  • Fieldbus and remote I/O system comparison

    Nine manufacturers participated in the FuRIOS study, which was conduced under the lead of an end user company that compared its use of fieldbus and remote I/O in full detail.

    Aventis, Infraserv GmbH
    02/10/2006
  • Process Control Network Security - Reference Architecture

    This document describes best practices for the reference architecture for a process control system network and its interfaces to a corporate network. The paper’s objective is to give the reader an understanding of the techniques utilized to securely connect these networks.

    Invensys
    01/11/2006
  • Specifying industrial fieldbus networks for automation

    Automation designers face many challenges and tradeoffs in the development of a successful network solution. This white paper discusses the necessary choices in selecting a network technology appropriate for various specific applications.

    Texas Instruments
    10/12/2005
  • Measurement Best Practices

    This 9-page PDF discusses way in which you can ensure your measurements are accurate, repeatable and reliable.

    Rosemount
    10/05/2005
  • Securing Process Control Network External Communications

    In the real world, sharing PCN data with external systems and accessing PCN systems from external sources is fast becoming a business necessity. This paper provides some generic guidelines for enabling secure connectivity between PCNs and external systems.

    Honeywell
    09/16/2005
  • Hazard Communication Guidelines for Compliance

    OSHA’s Hazard Communication Standard (HCS) is based on a simple concept—that employees have both a need and a right to know the hazards and identities of the chemicals they are exposed to when working.

    OSHA
    08/30/2005
  • Security vulnerability assessment revealed

    Plant security is a key priority at many plants. This 10-page paper provides background what the methodology for a plant vulnerability analysis involves. It covers topics such as how to get started, available tools, and risk assessment.

    ioMosiac
    04/21/2005
  • Methods of determining safety integrity level (SIL)

    This 17-page whitepaper discusses the application of two popular methods of determining SIL requirements – risk graph methods and layer of protection analysis (LOPA) – to process industry installations.

    4-sight consulting
    04/19/2005
  • Technical handbook from Magnetrol

    This technical handbook from Magnetrol gives important conversions, chemical properties, equivalents and pipe data.

    Magnetrol
    04/04/2005
41-60 of 75 < first | | | last >