Design Considerations for High Liquid Rate Tray Applications
Except for a few odd services, high liquid rate applications are typically the domain of either trays or random packings. Aside from the distributors, random packing designs are rather straightforward with the designer choosing the proper size to accommodate the fluid flow rates and achieve the desired efficiency. Trays, on the other hand, have a large variety of adjustable parameters and can be especially complex, especially when designed for high liquid rate applications.
Sulzer Chemtech USA, Inc.
Pitfalls of pump piping
This white paper goes over the three major problems associated with poor pump piping and provides five rules to follow in order to avoid future pitfalls.
Ross Mackay Associates Ltd.
Oxygen in cell culture/venting ozonated vessels
This white paper outlines trends and opportunities for gasket standardization in processing plants ... including the potential for more reliable sealing, cost savings, inventory reduction, easier installation and safety practices. Steps are outlined for achieving success in gasket standardization across steel, glass-lined and FRP piping.
W. L. Gore & Associates, Inc.
Managing Complex Equipment Status in a GMP Environment
Batch manufacturing systems must maintain the status of equipment, including which are available, dirty, out of service, etc. In industries that enforce Good Manufacturing Practices (GMPs), additional status types and values for process equipment must be maintained. Rules associated with the equipment status can be complex and involve the equipment class, current equipment state and time in the current
state. This paper covers the operator interface used to review the equipment status and the interlocking requirements between the recipe and batch phases based on multiple status types.
Securing Batch Control Systems
Batch process control security is becoming a critical concern for the process control domain, IT technology infrastructure and the business enterprise. This paper explores several key security concerns in batch control system architectures and methods for addressing these issues.
White Paper: Internet Access in a Process Control Environment
Industrial automation is no longer limited by the walls of a production facility. More and more automation is being handled via remote communication, whether its from the office or from the comfort of your own home. Todays PLCs give you the ability to access your control system to
handle such tasks as monitoring via a website to determine the condition of a machine or check other statistics.
Fieldbus and remote I/O system comparison
Nine manufacturers participated in the FuRIOS study, which was conduced under the lead of an end user company that compared its use of fieldbus and remote I/O in full detail.
Aventis, Infraserv GmbH
Process Control Network Security - Reference Architecture
This document describes best practices for the reference architecture for a process control system network and its interfaces to a corporate network. The papers objective is to give the reader an understanding of the techniques utilized to securely connect these networks.
Design Tips for Sensing Probes
This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.
Accurate liquid phase density on aerated liquids
This white paper discusses SONAR-based, clamp-on gas volume fraction meters which recently have been introduced to the industry that provide an accurate, real time, measurement of entrained gases. Coupling entrained gas volume fraction monitor with most types of process density meters, enables accurate determination of liquid and the liquid-solid components of aerated mixtures.
Specifying industrial fieldbus networks for automation
Automation designers face many challenges and tradeoffs in the development of a successful network solution. This white paper discusses the necessary choices in selecting a network technology appropriate for various specific applications.
Securing Process Control Network External Communications
In the real world, sharing PCN data with external systems and accessing PCN systems from external
sources is fast becoming a business necessity. This paper provides some generic guidelines for enabling
secure connectivity between PCNs and external systems.
PACs for industrial control: The future of control
With a number of vendors producing Programmable Automation Controllers that combine the functionality of a PC and reliability of a PLC, PACs today are increasingly being incorporated into control systems. This white paper explores the origins of the PAC, how PACs differ from PLCs and PCs, and the future direction of industrial control with PACs.
Electro-hydraulic system design: Making the right system choices
Designers who understand and can take advantage of the differences between fluid power and traditional electromechanical power can build machines that produce higher quality output with lower lifecycle costs. This white paper suggests that care must be taken, however, in selecting and sizing the hydraulic system elements and in tuning the motion controller for optimal performance.
Technology expands flowmeter capabilities, reduces costs
Capacitance-type magnetic flowmeters have traditionally offered the advantage of having non-wetted electrodes and the ability to measure low conductivity fluids. However, they suffered from a sensitivity to flow noise and zero instability. Innovative technology overcomes these limitations and drives magnetic flowmeters into new areas of application, while reducing installed costs.
Bearing isolators 101
A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they dont separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.