Process Engineering White Papers

261-280 of 387 < first | | | last >
  • Rectifier design for fuel ethanol plants reduces energy

    Plants have traditionally used trays in the distillation columns to produce fuels grade ethanol. Trays of various configurations have been adequate in this service and their technology is well founded. The ever-present desire to reduce the energy needed to produce a gallon of ethanol has opened the doors to structured packings being used in the rectification sections of ethanol distillation columns.

    Sulzer Chemtech USA
    04/10/2007
  • The Path to Asset Performance & Reliability

    This white paper addresses the journey to achieve asset performance and reliability excellence. This begins with establishing sound fundamentals in terms of business practices, organization effectiveness and well deployed informational tools to support them.

    Invensys Systems, Inc.
    01/11/2007
  • Biodiesel Fuel From Palm Oil – Too Good to be Used as Fuel?

    The high prices for oil and gas have spotlighted other sources of fuel for internal combustion engines. Biofuel, a fuel derived from ethanol, and biodiesel fuel, a dieselequivalent derived from biological sources, are 2 possible substitutes for petrochemical fuel. Palm oil is increasingly used as feedstock for the production of biodiesel, but certain palm oil fractions have other uses, e.g., in the cosmetics and food industries. Sulzer Chemtech’s technology supports the separation of crude palm oil (CPO) in its valuable constituents.

    Sulzer Chemtech AG
    01/11/2007
  • The fan repair and rebuild experts

    Before you order brand-new air-moving equipment to replace your worn, corroded, unbalanced equipment, consider the potential benefits of repairing or rebuilding that equipment.

    Robinson Industries Inc.
    01/01/2007
  • Oxygen in cell culture/venting ozonated vessels

    This white paper outlines trends and opportunities for gasket standardization in processing plants ... including the potential for more reliable sealing, cost savings, inventory reduction, easier installation and safety practices. Steps are outlined for achieving success in gasket standardization across steel, glass-lined and FRP piping.

    W. L. Gore & Associates, Inc.
    10/18/2006
  • The effects of antifoams on ultrafiltration membranes

    This paper discusses the problem of membrane fouling by antifoams, its leading causes and describes the development of a nonfouling antifoam for processes that use ultrafiltration downstream.

    Dow Corning Corporation
    09/22/2006
  • Biodiesel Fuel From Palm Oil – Too Good to be Used as Fuel?

    The high prices for oil and gas have spotlighted other sources of fuel for internal combustion engines. Biofuel, a fuel derived from ethanol, and biodiesel fuel, a dieselequivalent derived from biological sources, are two possible substitutes for petrochemical fuel.

    Sulzer Chemtech USA, Inc.
    08/29/2006
  • Applying ISA-S88 to Software Migration Engineering

    Dow Chemical maintains thousands of batch control systems world-wide built on its proprietary MOD 5 computer system. Over decades, they have been meticulous to preserve and enhance these systems. Dow intends to preserve and reap the rewards of this diligence by developing reverse engineering best practices and tools to migrate this intellectual property to next-generation platforms.

    Dow Chemical
    07/12/2006
  • Process Moisture Analysis using FT-NIR

    Manufacturing a pure product can be critically important to the next steps in the manufacture of a powder-based product. As a result the removal of residual moisture and solvents from the crystallization, filtration and drying steps can be crucial to producing a stable product.

    Bruker Optics
    06/28/2006
  • Managing Complex Equipment Status in a GMP Environment

    Batch manufacturing systems must maintain the status of equipment, including which are available, dirty, out of service, etc. In industries that enforce Good Manufacturing Practices (GMPs), additional status types and values for process equipment must be maintained. Rules associated with the equipment status can be complex and involve the equipment class, current equipment state and time in the current state. This paper covers the operator interface used to review the equipment status and the interlocking requirements between the recipe and batch phases based on multiple status types.

    Honeywell
    06/13/2006
  • Gasket Standardization in the CPI

    This white paper outlines trends and opportunities for gasket standardization in processing plants ... including steps outlining how to achieve gasket standardization across steel, glass-lined and FRP piping.

    W. L. Gore & Associates, Inc.
    06/12/2006
  • Guidance note for environmental safety instrumented systems

    Safety Instrumented Systems (SIS) are designed to monitor the process and control outputs to prevent or mitigate hazardous events. The design process strives for inherent safety, which is enhanced by applying multiple independent safety layers. Learn how to prevent accidents with prevention layers and minimise the consequences with mitigation layers.

    P & I Design
    05/26/2006
  • Securing Batch Control Systems

    Batch process control security is becoming a critical concern for the process control domain, IT technology infrastructure and the business enterprise. This paper explores several key security concerns in batch control system architectures and methods for addressing these issues.

    Honeywell
    05/11/2006
  • Preventing Segregation During Powder Drying

    This 4-page case history by Jeroen van den Berg of Bolz-Summix discusses how changing process conditions within a conical screw dryer eliminated granulation and minimized product segregation.

    Bolz-Summix
    05/02/2006
261-280 of 387 < first | | | last >