Tracing the accuracy of calibration gases
Calibrating your instruments using specialty gas will only yield results as accurate as your gas mixture. This three-page white paper discusses analytic traceability and how it relates to gas mixture accuracy.
Continuous PHA Revalidation
A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.
Facility Major Risk Survey
This 8-page primer describes a method for identification of major acute risks in existing process facilities that can potentially affect on-site and off-site populations and for prioritization of mitigation methods.
Security Vulnerability Analysis
Plant security is a key priority at many plants. This 10-page paper provides background what the methodology for a plant vulnerability analysis involves. It covers topics such as how to get started, available tools, and risk assessment.
Relief Design for Reactive Systems Get the Facts
This 15-page paper focuses on the additional degrees of complexity that reactive systems pose for emergency relief systems. It covers topics such as how to screen for reactivity and what practices, standards and regulations should be followed, as well as a host of other issues.
Ziegler-Nichols Tuning Rules And Limitations
The standard reference for PID tuning seems to be the Ziegler-Nichols tuning rules developed in 1942 on a pneumatic controller. Here is how to tune a controller using these rules.
How to Choose a Vacuum Dryer
Vacuum drying can be applied in a range of processes in several industries, including chemical, pharmaceutical, food, plastics, and metal powders. This article first discusses vacuum drying benefits and limitations and dryer components and operation, then explains the differences between tumble and agitated vacuum dryers and how you can select one for your application.
Understand Pump Lifecycle Costs
This 22-page paper from the Dept. of Energy, Hydraulic Institute and Europump explains the importance of understanding the total costs of ownership to achieve savings in energy, and operational and maintenance costs. It discusses what lifecycle cost is, what should be considered in a lifecycle cost analysis, and the role of proper pump system design.
Why Process Safety Management Audits Fail
Most companies have completed at least three process safety management(PSM) compliance audits of their covered facilities since the promulgation of the OSHA PSM standard. These companies, however, are not seeing noticeable improvements in their PSM programs. In fact, many companies feel that their PSM programs have become less effective. What has happened and why? Are there any lessons learned from the Enron collapse and its auditing program? What needs to be done?
Risk-Based Process Safety Design
Safe design has long been a priority in the process industries. A safe design basis, together with a formal safety management system and safety practices, procedures, and training, is critical for providing that level of confidence required for risk management. The goal of process safety management is to consistently reduce risk to a level that can be tolerated by all concerned. A systematic, risk-based approach to safety design can help eliminate hazards that pose intolerable risk from the process and mitigate the potential consequences of hazards.
Understanding Regulated Health and Safety Standards--Part 1
This paper provides the viewpoint of the American Conference of Governmental Industrial Hygienists (ACGIH), a private not-for-profit, non-governmental corporation open to all industrial hygienists or other occupational health and safety professionals. The authors have the opinion that there are misunderstandings about the use of regulated health and safety standards.
In part one of this article, they provide some information on how regulations are formed and advice on using these values to conduct business. Employers and employees need this fundamental understanding to make informed health and safety decisions. This information is also useful for guiding public decisions about everyday toxic exposures.
RFID in Manufacturing
In the wake of a Wal-Mart mandate requiring top suppliers to put Radio Frequency Indentification (RFID) tags on cases and pallets of consumer goods by January 2005, Rockwell Automation offers this white paper to help educate manufacturers on how to maximize their investment in RFID technology throughout their enterprise and supply chains. The paper provides a practical guide to extracting measurable value from RFID implementations in plant and warehousing operations.
Nonwoven Fabric Filtration Media
This 6-page primer explains the various forms of nonwoven media, their special characteristics, as well as filter configurations and function. It discusses advantages and disadvantages, and application trends.
Edward C. Gregor
Maximize Returns from Precious-Metal-Bearing Catalysts
Many catalytic reactions rely on platinum, palladium and other precious metal catalysts. When the activity of the catalyst declines to the point that it must be replaced, the used catalyst can be sent to a refiner to recover precious metal. This 8-page paper discusses the variouis factors that should be considered when using a refiner.