White Paper: Internet Access in a Process Control Environment
Industrial automation is no longer limited by the walls of a production facility. More and more automation is being handled via remote communication, whether its from the office or from the comfort of your own home. Todays PLCs give you the ability to access your control system to
handle such tasks as monitoring via a website to determine the condition of a machine or check other statistics.
Wago Innovative Connections
Clean-in-place operation for thin-cake filtration technologies
This article discusses the choice of thin-cake (2 25 mm) separation technologies and their benefits to optimizing the effectiveness of the production process. The paper continues with a
discussion of clean-in-place operations to meet current Good Manufacturing Practices (cGMP) guidelines including riboflavin test and validations.
De-bottlenecking A De-iso-butanizer With VG-Plus High Performance Trays
To maximize a plants performance, it is critical to fully understand the equipment being used, their mechanisms of operation, limitations and capabilities. This includes furnaces, exchangers, pumps, and mass transfer devices for distillation columns: fractionation trays, random and structured packing and associated liquid and vapor distributors. The purpose of this paper is to provide an overview of the key factors to successfully revamp with the goal of maximizing capacity without compromising efficiency.
Chemical Hazard Communication
Under the provisions of the Hazard Communication Standard,
employers are responsible for informing employees of the
hazards and the identities of workplace chemicals to which
they are exposed.
Cybersecurity: Power Industry Locks Down
The power industry is susceptible to a variety
of cyber threats, which can wreak havoc on control systems. Management, engineering and IT must commit to a comprehensive approach that encompasses threat prevention,
detection and elimination.
Process Control Network Security
This document provides an understanding of intrusion detection and prevention systems, why they are necessary, how and where they fit in the control system environment, and gives example scenarios.
Use CFD to Improve Crystallization | Chemical Processing
In this article, Kumar Dhanasekharan, Ph.D., technical specialist with the computational fluid dynamics (CFD) specialist Fluent, Inc., shows how modelling crystallizers using CFD can help improve process understanding, control crystal size distribution (CSD) and improve pharmaceutical crystallization results.
Fieldbus and remote I/O system comparison
Nine manufacturers participated in the FuRIOS study, which was conduced under the lead of an end user company that compared its use of fieldbus and remote I/O in full detail.
Aventis, Infraserv GmbH
Aseptic PAT and Particle Monitoring
In this white paper, Mark Hallworth, pharmaceutical manager for Particle Measuring Systems, discusses continuous monitoring methods, how theyre evolving, and why theyre important.
Particle Measuring Systems
The Regional Transport of Ozone
EPA tracks emissions of six principal air pollutants - carbon monoxide, lead, nitrogen oxides, particulate matter, sulfur dioxide, and volatile organic compounds. All have decreased significantly since passage of the Clean Air Act in 1970 - except for nitrogen oxides.
Process Control Network Security - Reference Architecture
This document describes best practices for the reference architecture for a process control system network and its interfaces to a corporate network. The papers objective is to give the reader an understanding of the techniques utilized to securely connect these networks.
Design Tips for Sensing Probes
This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.