Bearing isolators 101
A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they dont separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.
Benefits of State Based Control
State Based Control is a plant automation control design based on the principle that all process facilities operate in recognized, definable Process States that represent a
variety of normal and abnormal conditions of the process. State Based Control, implemented with the latest developments in object-based technologies, delivers
direct benefits to its adopters in a variety of Operational Excellence categories. It results in productivity increases, higher asset utilization of both people and process,
automated responses and recovery for abnormal conditions and provides an environment for knowledge capture directly into the control design.
David Huffman, ABB Inc.
Best Practices in Demand and Inventory Planning for Chemical Companies
It's a classic scenario in chemical manufacturing- struggling to coordinate the opinions of sales with manufacturing and supply chain initiatives on what, when, and where products should be produced. The lack of supply chain coordination can lead to frequent changes in production schedules, expedited shipments, excessive stock outs, poor customer service levels, lack of visibility into future demand, inventory in the wrong place and at the wrong time, and erosion of your margins.
Biodiesel Fuel From Palm Oil Too Good to be Used as Fuel?
The high prices for oil and gas have spotlighted other sources of fuel for internal combustion engines. Biofuel, a fuel derived from ethanol, and biodiesel fuel, a dieselequivalent derived from biological sources, are 2 possible substitutes for petrochemical fuel. Palm oil is increasingly used as feedstock for the production of biodiesel, but certain palm oil fractions have other uses, e.g., in the cosmetics and food industries. Sulzer Chemtechs technology supports the separation of crude palm oil (CPO) in its valuable constituents.
Sulzer Chemtech AG
Biodiesel Fuel From Palm Oil Too Good to be Used as Fuel?
The high prices for oil and gas have spotlighted other sources of fuel for internal combustion engines. Biofuel, a fuel derived from ethanol, and biodiesel fuel, a dieselequivalent derived from biological sources, are two possible substitutes for petrochemical fuel.
Sulzer Chemtech USA, Inc.
Bristol-Myers Squibb Works hard to be a Good Neighbor
Bristol-Myers Squibb manually monitored dissolved oxygen (DO) periodically and ran aeration blowers more than necessary to guard against variable loading rates. After upgrading the system to use online DO monitoring operators now have continuous DO readings in the aeration tanks, substantially reducing energy and maintenance costs.
Building Productivity Automating Time and Attendance in Manufacturing
Manufacturing organizations face a critical balancing act – achieving the highest levels of efficiency, while ensuring that they are not over or under supplying the marketplace.
This need to be flexible and efficient requires exceptional visibility into all of the factors that influence productivity and output. This white paper will look at the challenges manufacturing organizations face and how automation of key workforce management processes helps manufacturers not only improve efficiency, but also better manage labor spend, reduce compliance risk and improve productivity.
Carbon Adsorption & Reactivation: Turning Obligation into Opportunity in the Chemical Process Industry
Chemical, petrochemical, and oil-reﬁning plants are process-intensive operations with regulatory requirements to protect the surrounding water and air from the effects of industrial pollution. This paper reviews activated carbon adsorption, the reactivation process, liquid phase and vapor phase adsorption design guidelines, and typical applications of the technology in industrial/environmental treatment.
Chemical and Pharmaceutical Sight Glass Application Handbook
20-page Sight Glass Application Handbook is a convenient reference for experienced engineers and a great primer for those new to sight glass selection. It offers a full overview of sight glasses for chemical processes, including types of glass, construction, lighting, installation and maintenance.
Chemical Hazard Communication
Under the provisions of the Hazard Communication Standard,
employers are responsible for informing employees of the
hazards and the identities of workplace chemicals to which
they are exposed.
Chemical Processing Flow eHandbook: Best Practices for Flow
The purpose of installing a flowmeter system is to accurately measure flow in a reliable manner. Issues related to physical properties, process parameters, electronic features, interconnections can all affect the flowmeter performance. This Chemical Processing eHandbook takes a look at technologies and solutions affecting flow as well as the impact of specific regulations on flowmeter systems including:
Specifying the right slurry seal – understanding dual-seal and water-management options
Ground EMFs with Virtual Reference - New grounding method eases electromagnetic flowmeter installation and minimizes costs
Determine Boiler Size Using a Flowmeter - An inline vortex meter reveals the proper steam usage, resulting in significant savings and improved energy efficiency.
Chemical Processing Flow eHandbook: Monitoring Flow
The purpose of installing a flowmeter system is to accurately measure flow in a reliable manner. Issues related to physical properties, process parameters, electronic features and interconnections are often given much consideration. Relatively little emphasis, however, is given as to how well the flowmeter will perform its intended purpose. Adding to the confusion are the differences in how performance is expressed and the incomplete nature of the available information. Nevertheless, the quality of flow measurement should be a concern. This Chemical Processing eHandbook takes a look at technologies and solutions affecting flow including:
* Coriolis meters - steps you can take optimize performance when faced with entrained gas
* Magmeters -- why you should consider using them
* How to achieve effective flow control with centrifugal pumps
Chemical Processing Powder eHandbook: Address Challenges Posed by Powders
One of the trickiest materials to process, powders are comprised of solids or particulates, a continuous gaseous phase (usually air) and, almost always, a liquid component. Many factors influence powder composition including size and distribution, surface roughness and hardness. And, how powders are processed -- vibration, compaction, attrition, segregation -- can influence how powders react. In this Chemical Processing Powder eHandbook, we take a look at how to effectively handle powders, safer dryer operations and how to manage phase changes when processing powders. Download your copy today. Download your copy today.
Chemical Processing Powder eHandbook: Succeed at Solids Handling
One of the trickiest materials to process, solids are comprised of powders or particulates, a continuous gaseous phase (usually air) and, almost always, a liquid component. Processors that handle solids know only too well the types of throughput problems that come up on a recurring basis. Clumping; effective, economical and safe slurry mixing; dust management and dust explosion risk mitigation are all very real challenges faced by processors of solids. In this Chemical Processing Powder eHandbook, we take a look at how to effectively handle solids including:
Clumping – the 10 most common sources of agglomeration in bulk solids and how to effectively manage them
Strategies for optimal slurry mixing
Level management detection in storage vessels
Dust explosion risks – how to identify and mitigate when processing solids
Managing solid cohesiveness with flow strategies
Download your copy of this Chemical Processing Powder eHandbook now.
Chemical Processing Special Report: Beyond Condition Monitoring: Prevent Failures through Condition Management
For years chemicals makers have tracked the health of key equipment yet they still grapple with unplanned outages that can significantly impact financial performance through lost production and extra repair costs. In this Special Report, we'll explore underlying condition monitoring challenges and introduce the concept of condition management -- an enhanced approach that helps companies reap the full benefit from their condition monitoring investments; we'll also discuss how CMMS tools can help to provide a clear understanding of maintenance operations performance as well as provide some guidance on what you can expect from a CMMS vendor. Lastly, listen to the lively discussion between Chemical Processing's Senior Digital Editor,Traci Purdum, and Edgewater Fullscope's Senior Vice President, Russell Smith, as they converse on how ERP can help manage the supply chain.
Chemical Processing Special Report: Compressed Air
Chemical manufacturers today are looking at all aspects of their business to conserve energy and decrease costs. Compressed air is often over looked in these efforts as many people do not fully understand compressed air equipment, their own system, or what it costs to produce compressed air power. In this Special Report, we review compressed air and provide insights on how to understand equipment and identify potential areas for savings.
Chemical Processing Special Report: Conveyors
No matter what industry youre in, chances are you use some form of conveying. Whether it be pneumatic, flexible screw, aeromechanical or other, different conveyors are required to handle different products. But which conveyor is best suited for your operation? Despite the fact that conveyors have been around for almost a hundred years, this question still baffles many industries. In order to choose the right conveyor for your operations, you need to consider your conveyor's use - production, processing, packaging, and you need to consider your business objectives - improve operations? reduce labor?
In this special report, we look at the different types of conveyors, discuss the use of tubular bag conveyors, and provide 10 tips to prevent a variety of common problems that could occur with pneumatic conveyors.
Chemical Processing Special Report: Cyber Security
The technology advances in control systems and open systems have afforded us improved efficiency, productivity and the ability to advance our operations. However, these improved technology advances have also come with risks that threaten these efficiencies. Viruses; an increased dependency on uptime, availability and reliability; operator errors and increased regulations are just some of the threats today's manufacturers need to contend with when managing their operations. In this Putman Media Special Report, we take a look at the cyber security issues today's manufacturers need to contend with; identify control systems vulnerabilities and offer a three-step approach for building better cyber security at your operations.
Honeywell Process Solutions
Chemical Processing Special Report: How to Succeed with VFDs
Medium voltage variable frequency drives (VFDs) are often the best choice to capitalize on opportunities to significantly reduce the operating and maintenance costs associated with relatively large rotating equipment. Even a seemingly modest energy savings of a few percent of the operating load can translate into significant energy savings. In this special report we take a look at how to make the most of VFDs: how optimum performance depends upon proper installation and control; how controlling the speed of VFDs can help eliminate waste and promote efficiency, reliability and quality and; considerations for changing drive speed over pumps. Download now.