Process Engineering White Papers

1-20 of 26 < first | prev | | last >
  • CP eHandbook: How to boost wastewater improvement efforts

    Chemical facilities are under mounting pressure to process ever larger quantities of wastewater to increasingly higher standards while staying within a variety of cost constraints. Plant operators face the dilemma of how to maintain treatment throughput at reasonable cost even when the plant reaches design capacity. Potential changes to production mixes can compound the challenge. Fortunately, adopting the latest wastewater-treatment technology can inject new life into a plant, extending useful asset life without heavy upfront capital investment. In this Chemical Processing Wastewater eHandbook we take a look at how to boost wastewater improvement efforts including:
     

    • An exploration of an innovative system that enables wastewater capacity expansion
    • Why chemical makers are increasingly focusing on water-related risks and opportunities

     Download your copy of this Chemical Processing Wastewater eHandbook now.

    12/19/2013
  • CP eHandbook: Step Up Water Conservation

    Chemical makers increasingly are focusing on water-related issues. In particular, concern over availability is spurring leading operating companies to implement a host of novel strategies and technologies to optimize water use. Chemical makers are implementing strategies and solutions to scale back on their overall usage of water, reuse water and put clean water back in to circulation. In this ChemicalProcessing Water Optimization eHandbook we take a look at how chemical companies are dealing with water challenges

    Download your copy of this Chemical Processing Water Optimization eHandbook now.

    06/13/2013
  • OSHA & NFPA Compliant: Keeping Your Plant Safe

    In March 2008, OSHA reissued its Combustible Dust National Emphasis Program (NEP) notifying approximately 30,000 companies nationwide that they will be targeted for inspections over the next few years. Mettler Toledo recognizes that many manufacturers are not up-to-date on the latest hazardous area compliance regulations or may not know that their industry is subject to those regulations. Don't wait until your facility receives a surprise visit from OSHA or worse yet, for a catastrophic incident to occur. Take the proactive approach to addressing the "hazardous area advisory level" in your facility.

    Mettler Toledo
    09/20/2010
  • The Green Solution

    The ever present emphasis on technological efficiency is just one of several forces behind the pressure on companies to "go green" despite a trying economy. The ultimate criterion that determines whether a motor is truly green is energy efficiency. Technology, long the key to efficiency, can help resolve this issue.

    PdMA Corp.
    03/08/2010
  • Measurement of Oxygen Concentration in Blanketing and Inerting Operations

    Gaseous oxygen measurement with amperometric sensors is the most direct and easiest solution for oxidation and explosion protection.

    Unwelcome oxygen Tank blanketing is the process of filling the headspace in storage vessels and reactors with an inert gas to prevent its contents from exploding, degrading or polymerizing and to protect equipment from corrosion. A blanketing system is normally designed such that it operates under higher than atmospheric pressures, therefore preventing outside air from entering the vessel. As oxygen and moisture in the air can be undesired in numerous processes and applications, blanketing is done in a wide range of industries, varying from (petro)chemical to food and beverage, pharmaceutical to pure water.

    Mettler Toledo
    01/06/2010
  • Choosing the Right Emissions Control Option

    Determining the most economical option to control airborne emissions during chemical process operations presents several unique challenges. As with any add-on control system, the goal is to minimize the annualized total costs while maintaining proper operation. In this white paper, learn the different options that are available and which ones fit your process the best.

    Durr Systems Inc.
    10/19/2009
  • Environmental Health and Safety Compliance in Biotech Companies: Common Deficiencies Encountered During Audits

    Environmental health and safety (EH&S) compliance programs for companies that house laboratories are complex and not easily maintained. Even the most basic plan involves keeping a variety of permits up-to-date, performing regular employee training, conducting inspections, complying with a myriad of chemical storage and handling requirements, and keeping a number of contingency plans current and complete. This white paper identifies the most common pitfalls and four simple steps to keeping your EH&S program current.

    Environmental Health and Engineering
    09/11/2007
  • Guidance note for environmental safety instrumented systems

    Safety Instrumented Systems (SIS) are designed to monitor the process and control outputs to prevent or mitigate hazardous events. The design process strives for inherent safety, which is enhanced by applying multiple independent safety layers. Learn how to prevent accidents with prevention layers and minimise the consequences with mitigation layers.

    P & I Design
    05/26/2006
  • Chemical Hazard Communication

    Under the provisions of the Hazard Communication Standard, employers are responsible for informing employees of the hazards and the identities of workplace chemicals to which they are exposed.

    OSHA
    03/28/2006
  • The Regional Transport of Ozone

    EPA tracks emissions of six principal air pollutants - carbon monoxide, lead, nitrogen oxides, particulate matter, sulfur dioxide, and volatile organic compounds. All have decreased significantly since passage of the Clean Air Act in 1970 - except for nitrogen oxides.

    EPA
    01/31/2006
  • Hazard Communication Guidelines for Compliance

    OSHA’s Hazard Communication Standard (HCS) is based on a simple concept—that employees have both a need and a right to know the hazards and identities of the chemicals they are exposed to when working.

    OSHA
    08/30/2005
  • Taking Toxics Out of the Air

    This 34-page PDF white paper discusses the technology and performance-based standards implemented by the EPA during the last 10 years and how they will assist in removing harmful toxins from the air.

    Enivironmental Protection Agency
    06/28/2005
  • Understand the hazards of flammable liquid spills

    This short paper discusses the risks of flash fires and pool fires from spills of flammable liquids, preventative measures, as well as how to avoid hazards during the clean up of such spills.

    Chilworth Technology
    12/09/2004
  • Continuous PHA Revalidation

    A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.

    12/03/2004
  • Facility Major Risk Survey

    This 8-page primer describes a method for identification of major acute risks in existing process facilities that can potentially affect on-site and off-site populations and for prioritization of mitigation methods.

    ioMosaic
    12/02/2004
  • Relief Design for Reactive Systems – Get the Facts

    This 15-page paper focuses on the additional degrees of complexity that reactive systems pose for emergency relief systems. It covers topics such as how to screen for reactivity and what practices, standards and regulations should be followed, as well as a host of other issues.

    12/02/2004
1-20 of 26 < first | prev | | last >