Understand Pump Lifecycle Costs
This 22-page paper from the Dept. of Energy, Hydraulic Institute and Europump explains the importance of understanding the total costs of ownership to achieve savings in energy, and operational and maintenance costs. It discusses what lifecycle cost is, what should be considered in a lifecycle cost analysis, and the role of proper pump system design.
Understand Heat-Transfer-Fluid Maximum Temperature Rating
Manufacturers of heat transfer fluids assign a maximum temperature rating to each fluid. This rating must be considered to ensure the safe and efficient operation of the fluid. This paper explains the basis of the rating, how fluids degrade, and how the temperature profile in a heat transfer system affects fluid performance and life.
Training Your Staff About Energy Efficiency -- A Chemical Processing Special Report
Certainly over the last few years, how plants consume energy has made an impact on that plant's efficiency and profitability. But is everyone at your plant doing their part? From Process Engineers to Plant Managers, everyone can have a role in implementing and adhering to energy efficient practices and exploring ways to improve energy efficiency. Chemical Processing has taken an in-depth look at just how this can been accomplished and compiled a comprehensive Special Report titled: Training Plant Staff About Energy Efficiency. Now available for download, this informative Special Report covers such topics as training operators, available energy tools, assessing equipment and more.
Tracing the accuracy of calibration gases
Calibrating your instruments using specialty gas will only yield results as accurate as your gas mixture. This three-page white paper discusses analytic traceability and how it relates to gas mixture accuracy.
The most commonly used compound in the chemical industry is water – not only as a solvent in processing, but also as an energy carrier in the cooling or heating cycle. As vast amounts of water are needed, chemical industries are often located close to large bodies of flowing water. Water used as processing or cooling water is cleaned and subsequently led back to the river or stream. For environmental protection, these waters are subject to specific control and monitoring measures. As the total organic carbon (TOC) non-specifically detects all organic compounds, this parameter has proven to be invaluable here. This booklet introduces a variety of industry-specific applications, and how Shimadzu can provide TOC analyzers to meet specific chemical application needs.
Breakdown of organic wastes entering a wastewater treatment plant is accomplished by using a biomass or blend of beneficial microscopic organisms, bacteria, and solids. This converts the nonsettleable solids (dissolved and colloidal matter) into settleable solids, carbon dioxide, water, and energy. This paper reviews the most common stages for measuring and controlling dissolved oxygen in a wastewater treatment plant.
Tips for Improving the Performance of Your Gravimetric Feeder
Download the white paper to receive information on maximizing the performance of your gravimetric feeder. You will receive tips on how to choose and set up the right feeder for the specific material being fed in your process. Handling free flowing, adhesive, cohesive, aeratable, hygroscopic and pressure sensitive materials plus ways on where and how to properly install a gravimetric feeder are discussed.
Theory and practice of pH measurement
This 43-page guide covers the basic mechanism of pH measurement, the structure of the sensor and its fundamental limitations, and also provides installation, maintenance and troubleshooting guidance.
The Regional Transport of Ozone
EPA tracks emissions of six principal air pollutants - carbon monoxide, lead, nitrogen oxides, particulate matter, sulfur dioxide, and volatile organic compounds. All have decreased significantly since passage of the Clean Air Act in 1970 - except for nitrogen oxides.
The debate over the virtues of DCS vs. PLC has been ongoing since these two architectures came into existence 40 years ago. For certain industries, a distributed control system (DCS) provides substantially more value as the basis for automating the plant than a programmable logic controller (PLC)-based system. As functionality differences narrow and price points align, the debate over these virtues is getting more intense and the arguments for and against each system are getting more and more murky. This white paper discusses the “Top Ten” issues to consider when evaluating a DCS vs. building your own “DIY” distributed control system using a PLC-based architecture.
The Path to Asset Performance & Reliability
This white paper addresses the journey to achieve asset performance and reliability excellence. This begins with establishing sound fundamentals in terms of business practices, organization effectiveness and well deployed informational tools to support them.
The Green Solution
The ever present emphasis on technological efficiency is just one of several forces behind the pressure on companies to "go green" despite a trying economy. The ultimate criterion that determines whether a motor is truly green is energy efficiency. Technology, long the key to efficiency, can help resolve this issue.
The fan repair and rebuild experts
Before you order brand-new air-moving equipment to replace your worn, corroded, unbalanced equipment, consider the potential benefits of repairing or rebuilding that equipment.
The 7 Steps to ICS and SCADA Security
The past two years have been a real wakeup call for the industrial automation industry. For the first time ever it has been the target of sophisticated cyber attacks like Stuxnet, Night Dragon and Duqu.
In addition, an unprecedented number of security vulnerabilities have been exposed in industrial control products and regulatory agencies are demanding compliance to complex and confusing regulations. Cyber security has quickly become a serious issue for professionals in the process and critical infrastructure industries.
If you are a process control engineer, an IT professional in a company with an automation division, or a business manager responsible for safety or security, you may be wondering how your organization can get moving on more robust cyber security practices.
In order to provide you with guidance in this area, Tofino Security and exida Consulting LLC have condensed material from numerous industry standards and best practice documents. They also combined experience in assessing the security of dozens of industrial control systems.