Process Engineering White Papers

61-80 of 354 < first | | | last >
  • Technical handbook from Magnetrol

    This technical handbook from Magnetrol gives important conversions, chemical properties, equivalents and pipe data.

    Magnetrol
    04/04/2005
  • Fisher control valve handbook

    This 295-page PDF whitepaper is a control valve resource that has been consistently updated for 30 years. It contains vital information on control valve performance and latest technologies.

    Fisher
    04/04/2005
  • Methods of determining safety integrity level (SIL)

    This 17-page whitepaper discusses the application of two popular methods of determining SIL requirements – risk graph methods and layer of protection analysis (LOPA) – to process industry installations.

    4-sight consulting
    04/19/2005
  • Security vulnerability assessment revealed

    Plant security is a key priority at many plants. This 10-page paper provides background what the methodology for a plant vulnerability analysis involves. It covers topics such as how to get started, available tools, and risk assessment.

    ioMosiac
    04/21/2005
  • Bearing isolators 101

    A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they don’t separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.

    Inpro
    05/17/2005
  • Systems Reliability in Material Handling

    This 23-page white paper is from the Material Handling Institute's Classic Series and discusses the reliability of automated material handling systems.

    Material Handling Institute
    05/31/2005
  • Hygienic Feeder Design

    Specifying a hygienic bulk solids feeder is not a simple task. The wide variety of requirements needed for specific applications are similar in scope to explosion proof environmental requirement variations.

    Schenck
    06/06/2005
  • How to improve productivity and stay out of confined spaces

    Processors have long recognized the importance of tank and reactor cleaning to product quality. This NLB white paper discusses cleaning methods and the significant implications your choice can have on productivity, safety and profitability.

    NLB
    06/07/2005
  • Taking Toxics Out of the Air

    This 34-page PDF white paper discusses the technology and performance-based standards implemented by the EPA during the last 10 years and how they will assist in removing harmful toxins from the air.

    Enivironmental Protection Agency
    06/28/2005
  • Design Tips for Selecting Sensing Probes

    This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.

    Delta Controls
    07/05/2005
  • Technology expands flowmeter capabilities, reduces costs

    Capacitance-type magnetic flowmeters have traditionally offered the advantage of having non-wetted electrodes and the ability to measure low conductivity fluids. However, they suffered from a sensitivity to flow noise and zero instability. Innovative technology overcomes these limitations and drives magnetic flowmeters into new areas of application, while reducing installed costs.

    Yokogawa
    07/18/2005
  • Electro-hydraulic system design: Making the right system choices

    Designers who understand and can take advantage of the differences between fluid power and traditional electromechanical power can build machines that produce higher quality output with lower lifecycle costs. This white paper suggests that care must be taken, however, in selecting and sizing the hydraulic system elements and in tuning the motion controller for optimal performance.

    Delta Computer Systems
    08/16/2005
  • Hazard Communication Guidelines for Compliance

    OSHA’s Hazard Communication Standard (HCS) is based on a simple concept—that employees have both a need and a right to know the hazards and identities of the chemicals they are exposed to when working.

    OSHA
    08/30/2005
61-80 of 354 < first | | | last >