Process Engineering White Papers

41-60 of 383 < first | | | last >
  • Best Practices in Demand and Inventory Planning for Chemical Companies

    It's a classic scenario in chemical manufacturing- struggling to coordinate the opinions of sales with manufacturing and supply chain initiatives on what, when, and where products should be produced. The lack of supply chain coordination can lead to frequent changes in production schedules, expedited shipments, excessive stock outs, poor customer service levels, lack of visibility into future demand, inventory in the wrong place and at the wrong time, and erosion of your margins.

    Ross Systems
    08/07/2009
  • Pitfalls of pump piping

    This white paper goes over the three major problems associated with poor pump piping and provides five rules to follow in order to avoid future pitfalls.

    Ross Mackay Associates Ltd.
    06/14/2007
  • Theory and practice of pH measurement

    This 43-page guide covers the basic mechanism of pH measurement, the structure of the sensor and its fundamental limitations, and also provides installation, maintenance and troubleshooting guidance.

    Rosemount Analytical
    01/04/2005
  • Measurement Best Practices

    This 9-page PDF discusses way in which you can ensure your measurements are accurate, repeatable and reliable.

    Rosemount
    10/05/2005
  • The fan repair and rebuild experts

    Before you order brand-new air-moving equipment to replace your worn, corroded, unbalanced equipment, consider the potential benefits of repairing or rebuilding that equipment.

    Robinson Industries Inc.
    01/01/2007
  • Anticipating and Resolving Resource Overloads

    This white paper by Project Success Incorporated focuses on the resource that is of greatest concern to most organizations – personnel. In a project management system, personnel resources may be identified as individuals by name or as functional groups, such as computer programmers.

    Project Success Incorporated
    02/25/2008
  • Cybersecurity: Power Industry Locks Down

    The power industry is susceptible to a variety of cyber threats, which can wreak havoc on control systems. Management, engineering and IT must commit to a comprehensive approach that encompasses threat prevention, detection and elimination.

    Power Engineering
    03/27/2006
  • Optimizing the Mixing of Powders into Liquids – Dust-free Induction and Dispersion

    Mixing of powders into liquids should be relatively easy. You pour powder onto the liquid's surface and then mix it in. However, this mixing can be very troublesome in production. This paper examines the various factors involved with mixing powders into liquids and how to avoid potential problems.

    Powder Technologies, Inc.
    10/22/2012
  • Training Your Staff About Energy Efficiency -- A Chemical Processing Special Report

    From process engineers to plant managers, it is critical that everyone plays a role in implementing and adhering to energy efficient practices and exploring ways to improve energy efficiency. This special report takes an in-depth look at how organizations can increase profitability by educating and training their staff to understand the importance of energy. Topics covered include:

    • Energy Saver- Educate Your Peers
    • Train Your Operators on Energy Efficiency
    • Train Your Project Manager on Energy Efficiency
    • Train Your Plant Manager on Energy Efficiency
    • Some training courses are worth the price
    • Energy Saver: Do Your Own Stream Survey
    • Direct Stream Injection Hot Water Systems for Jacketed Heating
    • Innovation in Direct Stream Injection Heaters Since 1945

    Pick Heaters
    10/06/2015
  • Heating Water by Direct Steam Injection

    Direct steam injection provides a solution where large volumes of hot water at precise temperatures are required, and saving space and energy are factors in the system design.

    Pick Heaters
    05/03/2012
  • Chemical Processing Special Report: Jacketed Heating

    Reactor temperature control typically is very important to product quality, production rate and operating costs whether a processor is employing continuous or batch reactors. And with many process plants currently using steam or hot water to heat jacketed devices such as tanks, kettles, dryers, reactors, glass lined vessels, or similar adaptations such as coiled  tubing placed inside or outside tanks or vessels – much emphasis is placed on achieving optimized control of these processes. In this Chemical Processing Special Report: Jacketed Heating we take a look at:

    • Improving Batch Reactor temperature control - Understand the likely causes and fixes for common problems in reaching set points
    • Rethinking Reactor temperature control - Cascade strategy offers simplicity and fast response
    • Keeping cool when designing Batch Reactors - in designing such a unit, focus on effective temperature control to achieve optimum performance
    • Consider Hot Water for Jacketed Heating - Hot water offers significant advantages over traditional steam-heated systems.

    Download your copy of this Chemical Processing Special Report: Jacketed Heating now!

    Pick Heaters
    03/19/2013
  • The Green Solution

    The ever present emphasis on technological efficiency is just one of several forces behind the pressure on companies to "go green" despite a trying economy. The ultimate criterion that determines whether a motor is truly green is energy efficiency. Technology, long the key to efficiency, can help resolve this issue.

    PdMA Corp.
    03/08/2010
  • Aseptic PAT and Particle Monitoring

    In this white paper, Mark Hallworth, pharmaceutical manager for Particle Measuring Systems, discusses continuous monitoring methods, how they’re evolving, and why they’re important.

    Particle Measuring Systems
    02/06/2006
  • The Next Evolution in Motion Networking

    This paper examines the value benefits of a wireless approach and addresses the most obvious concerns of safety, reliability and latency.

    Parker Hannifin Corp.
    08/15/2007
  • Drying Compressed Air in Hazardous Atmospheres

    Hazardous locations have or could potentially have high concentrations of flammable gases, vapors, combustible dusts, etc. A small spark can lead to a horrific explosion dangerous to equipment and workers in the area. Equipment located in hazardous areas must be specifically designed to prevent ignition and explosion.

    Parker Hannifin
    02/24/2012
41-60 of 383 < first | | | last >