Process Engineering White Papers

281-300 of 387 < first | | | last >
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Understanding Regulated Health and Safety Standards--Part 1

    This paper provides the viewpoint of the American Conference of Governmental Industrial Hygienists (ACGIH), a private not-for-profit, non-governmental corporation open to all industrial hygienists or other occupational health and safety professionals. The authors have the opinion that there are misunderstandings about the use of regulated health and safety standards. In part one of this article, they provide some information on how regulations are formed and advice on using these values to conduct business. Employers and employees need this fundamental understanding to make informed health and safety decisions. This information is also useful for guiding public decisions about everyday toxic exposures.

    10/22/2004
  • Accurate liquid phase density on aerated liquids

    This white paper discusses SONAR-based, clamp-on gas volume fraction meters which recently have been introduced to the industry that provide an accurate, real time, measurement of entrained gases. Coupling entrained gas volume fraction monitor with most types of process density meters, enables accurate determination of liquid and the liquid-solid components of aerated mixtures.

    10/18/2005
  • Special Report: Chemical Industry Sees Green

    For years the industry has been “talking green.” But what real strides have been made? Will a Presidential Executive Order compel the industry to speed up efforts to actually go green? While pollution prevention was the original goal of green chemistry, today’s efforts promise to have a substantial economic impact. This Special Report will bring you up to speed on fruitful efforts to “go green” including an update on the growing interest in bio-based feedstocks.

    05/27/2008
  • Intelligent Rotary Control Valve

    NELES rotary control valves with Q-Trim have greater capacity than comparable globe-style linear valves with noise reduction trims widening rangeability, reducing weight and valve dimensions, and a 50% cost reduction compared to linear valves of comparable Cv. NELES rotary control valves from Metso Automation. Intelligent Reliability leads to Intelligent Results.

    06/16/2008
  • Process Analytics Finds Process Problems

    Companies can gain great insight into how their process operates, find problems, and improve quality by using process analytical software.

    Process Analytics and Intelligence—sometimes called Manufacturing Intelligence—has transformed the way companies produce goods, understand their manufacturing processes, and ensure a quality product in ways we could not have foreseen ten years ago.

    08/12/2009
  • Process Safety Symposium – Making Safety Second Nature

    This 10-page document discusses how the reference from the Center for Chemical Process Safety -- "Inherently Safer Chemical Processes, A Life Cycle Approach," 1st Edition, 1996 -- was updated in 2007. Inherent Safety has been well received by industry, but there has been significant advancement in the concept of inherently safer design over the last 10 years. This overview highlights lessons learned and best practices in inherent safety.

    01/11/2010
  • Continuous Valve Monitoring for Product Loss Prevention, Emission Reduction and ROI

    One of the challenges that companies have faced in implementation of continuous monitoring systems is the lack of infrastructure for sensing and data collection. The devices to be monitored are widely dispersed throughout plants with large areas, have no existing power or signal transmitting wire infrastructure, so the capital costs associated with the power and communication services have historically prohibited continuous monitoring. This white paper will unearth best practices to prevent product loss, reduce emissions and ensure ROI.

    05/26/2010
  • Chemical and Pharmaceutical Sight Glass Application Handbook

    20-page Sight Glass Application Handbook is a convenient reference for experienced engineers and a great primer for those new to sight glass selection. It offers a full overview of sight glasses for chemical processes, including types of glass, construction, lighting, installation and maintenance.

    09/20/2010
  • Special Report: Heat Transfer Fluids: Do's, Don'ts, and Best Practices

    Heat transfer fluids -- from mineral oils to synthetic and organic-based formulas -- are the lifeblood of many critical operations within the process industries. This special, interactive PDF looks at how plant personnel can better understand various fluids and fluid properties, and track the performance of their entire heat transfer system.

    03/21/2011
  • Chemical Processing Powder eHandbook: Address Challenges Posed by Powders

    One of the trickiest materials to process, powders are comprised of solids or particulates, a continuous gaseous phase (usually air) and, almost always, a liquid component. Many factors influence powder composition including size and distribution, surface roughness and hardness. And, how powders are processed -- vibration, compaction, attrition, segregation -- can influence how powders react. In this Chemical Processing Powder eHandbook, we take a look at how to effectively handle powders, safer dryer operations and how to manage phase changes when processing powders. Download your copy today. Download your copy today.

    11/10/2011
  • Chemical Processing Special Report: Make the Most of Water

    Chemical Processing has taken an in-depth look at just industrial wastewater -- how it is used, processed and potential management and compiled a comprehensive Special Report titled: Make the Most of Water. This informative Special Report covers such topics as:
    • Is water the new carbon -- what path will regulating water take
    • How to optimize water use
    • Micropollutants -- defining, managing, and communicating potential risk
    • More!
    Download your copy.

    11/28/2011
  • Improve Plant Safety - A Chemical Processing Special Report

    In chemicals processing, significant hazards exist -- such as those from fire, explosions or toxic release. The processes themselves, the chemicals being processed and the procedures followed, or lack thereof, can all contribute to the risk exposure of these hazards. What can processors do to mitigate these risks? For chemicals processors, it's crucial to implement processes and solutions to detect and prevent these hazards from occurring in the first place.

    Chemical Processing has taken an in-depth look at plant safety -- how to identify the hazards and implement processes and procedures to ensure a safer working environment. This comprehensive Chemical Processing Special Report titled: Improve Plant Safety is now available to download for free.

    12/14/2011
  • Chemical Processing Powder eHandbook: Succeed at Solids Handling

    One of the trickiest materials to process, solids are comprised of powders or particulates, a continuous gaseous phase (usually air) and, almost always, a liquid component. Processors that handle solids know only too well the types of throughput problems that come up on a recurring basis. Clumping; effective, economical and safe slurry mixing; dust management and dust explosion risk mitigation are all very real challenges faced by processors of solids. In this Chemical Processing Powder eHandbook, we take a look at how to effectively handle solids including:
    • Clumping – the 10 most common sources of agglomeration in bulk solids and how to effectively manage them
    • Strategies for optimal slurry mixing
    • Level management detection in storage vessels
    • Dust explosion risks – how to identify and mitigate when processing solids
    • Managing solid cohesiveness with flow strategies

    Download your copy of this Chemical Processing Powder eHandbook now.

     

    02/13/2012
  • Cost-Justify Your Reliability Initiatives

    For the latest strategies on how to set an effective reliability program, download this Special Report: Cost-Justify Your Reliability Initiatives. In this report you’ll find: • Predictive tools and technologies for enhanced equipment reliability • The four things a plant manager can do that maximize reliability • Critical equipment for an effective maintenance program

    04/16/2012
  • CP Powder eHandbook: Tips for Effective and Safe Handling of Solids

    One of the trickiest materials to process, solids are comprised of powders or particulates, a continuous gaseous phase (usually air) and, almost always, a liquid component. Processors that handle solids know only too well the types of throughput problems that come up on a recurring basis. Effective, economical and safe slurry management; flowability during processing, accurate inventory and volume level management are all very real challenges faced by processors of solids. In this Chemical Processing Powder eHandbook, we take a look at how to effectively handle solids including:
    • Properly accounting for how bulk solids actually will flow in a vessel or overall process -- we take a look at some simple parameters that can often provide a good sense of flowability
    • Strategies for avoiding slurry trouble
    • Mitigating pipe segment force imbalances with Reactor Excursion and Leakage Analysis Program
    • Acoustics-based level measurement for accurate powder measurement in bins, tanks and silos
    • Explosion protection methods including suppression, isolation and venting

    05/01/2012
281-300 of 387 < first | | | last >