Process Engineering White Papers

1-20 of 34 < first | prev | | last >
  • Continuous Vacuum Filtration Technologies for Sulfuric and Hydrochloric Acid Slurries

    This white paper discusses highly acidic chemical process slurries and the use of continuous vacuum filtration technologies for filtration, cake washing and drying.

    First, the basics and benefits of continuous vacuum filtration technologies are reviewed followed by case-studies. In this first process, the precipitated solids are in sulfuric acid slurry. The challenge is to process 2200 kg/hour of dry solids for filtration, counter-current washing and drying in a contained environment.

    In this second process, the objective is to process precipitated solids in an hydrochloric acid slurry. The white paper concludes with a framework for vacuum technology selection and how this can be applied to other toxic and difficult chemical process filtrations.

    Download this white paper for more information.

    BHS Filtration
  • Special Report: Effectively Deal With Waste Gas

    Waste gas incinerators react oxygen with waste hydrocarbons at high temperature to produce a clean flue gas. A perfect incinerator would have a destruction and removal efficiency (DRE) of 100%, zero fuel usage and zero emission of carbon monoxide and nitrogen oxides. A small amount of the original hydrocarbons always remains, though. If 1% is left, the DRE is 99%. Some CO and NOx always are produced, too. However, NOx emissions are lower for a regenerative thermal oxidizer (RTO) than for almost any other type of thermal oxidizer. With the U.S. Environmental Protection Agency and local air boards requiring DRE values from 95% upward, effectively dealing with waste gas means ensuring compliance with the added benefit of reduced energy costs. In this Special Report we take a look at how an RTO often can offer an effective and fuel-efficient options for cutting the cost of waste gas incineration, how technologies transform greenhouse gas into a feedstock for chemicals, how the right emission control system can help meet compliance and reduce energy costs and several steps that play a crucial role for setting up an effective greenhouse gas monitoring plan. Download now.

  • Process Filtration Scale-Up from Lab to Commercial Operation

    This article discusses process filtration approach developed for each technology stage starting from batch filtration in the lab to continuous filtration for the full-scale commercial operation. Process engineers must not “jump to conclusions”, a reference from Sherlock Holmes and Dr. John Watson who prove time and again is that there is no benefit to jumping to conclusions. Therefore, laboratory / bench top filtration testing is covered for problem analysis, technology selection and pilot and demonstration scale-up. The paper continues with the filtration testing and then scale-up to the commercial size. Finally, the paper concludes with a general review of the problem-solving skills of Holmes and Watson and how these skills can be utilized by process engineers as a framework for “idea-generation” when analyzing a new process scale-up.

    Download now.

  • Important facts you should know about drying compressed air in hazardous environments

    Hazardous locations have or could potentially have high concentrations of flammable gases, vapors, combustible dusts, etc. A small spark can lead to a horrific explosion dangerous to equipment and workers in the area. Equipment located in hazardous areas must be specifically designed to prevent ignition and explosion.

    Read this White Paper to learn:

    • Types of hazardous areas
    • Conditions classified as hazardous
    • Hazardous substances
    • Specifications for equipment located in hazardous areas
    • Explosion proof dryers designed for compressed air systems

  • Process Filtration Technology: Making Informed Decisions

    Solid-liquid separation is an instrumental part of chemical processing. To separate the solid particles, filter media made of textile or metallic materials and of composite materials are used as the basis for the filter cake. Often there will also be a washing process to improve the purity of the filter cake or to increase the yield of the liquid phase. Solid-liquid separation can be carried out in continuous or batch operation. There are many factors for selecting the right process filtration system for your specific application. This white paper reviews methods for identifying the right process filtration technology for your application and highlights case studies illustrating the methods discussed.

  • Chemical Processing’s Flow eHandbook: Master Flow Challenges

    Issues related to physical properties, process parameters, electronic features and interconnections can all affect the flow of liquids and gases. Often working around the clock to process, transfer, and store sometimes hazardous and corrosive chemicals, processors must tackle issues related to physical properties and process parameters. In this Chemical Processing Flow eHandbook, we take a look at what it takes for chemical processors to master flow challenges for several types of materials with vastly different physical properties including:
    • How to increase process availability - coriolis mass flow meters provide reliable indication of gas entrainment
    • Overcoming the challenges of changing gas composition - new technology addresses need for more accurate and efficient biogas measuring
    • How to ensure proper control of parallel flow paths demands care
    • Case Study: Speed Pipe Installation - pipe-joining system eliminates need to weld or thread connections
    • More!
    Find out how to master flow challenges. Download your copy of this Chemical Processing Flow eHandbook now.

  • Optimizing the Mixing of Powders into Liquids – Dust-free Induction and Dispersion

    Mixing of powders into liquids should be relatively easy. You pour powder onto the liquid's surface and then mix it in. However, this mixing can be very troublesome in production. This paper examines the various factors involved with mixing powders into liquids and how to avoid potential problems.

    Powder Technologies, Inc.
  • Drying Compressed Air in Hazardous Atmospheres

    Hazardous locations have or could potentially have high concentrations of flammable gases, vapors, combustible dusts, etc. A small spark can lead to a horrific explosion dangerous to equipment and workers in the area. Equipment located in hazardous areas must be specifically designed to prevent ignition and explosion.

    Parker Hannifin
  • A Treatise of Filter Cake Washing Mechanisms in Pressure and Vacuum Filtration Systems

    During many chemical operations, cake washing is required since no filter system can remove all of the mother liquor by pressure or vacuum dewatering only. The topic of how to most efficiently wash the cake is important. This article introduces pragmatism into cake washing theory and will help engineers during their decision-making processes.

    BHS Filtration
  • Gas And Dust Explosions -- Relief Sizing Formula

    A large number of analytical and highly empirical correlations including monograms reflecting changing standards have been or are being proposed separately for gas and dust explosion relief venting. This white paper provides a generalized formula that is applicable to both gas and dust deflagrations including subsonic and sonic pressure relief conditions and is consistent with available experimental data and industry experience. Application of the model is illustrated for dust explosions. Download now.

    Fauske & Associates
  • What Does It Cost To Own Your Dust Collector Filters?

    When choosing filters for your cartridge dust collector, a Total Cost of Ownership (TCO) calculation allows you to make the most economical and sustainable choice. TCO is a step-by-step evaluation that explores energy use, maintenance and other factors to compare the real costs of operating a dust collector with different filters. This white paper explains how to perform TCO calculations to save money, time and energy.

    Camfil Farr APC
  • Asking The Right Questions About Cartridge Dust Collection

    Over the past decade, cartridge-style dust collectors have overtaken baghouses as the preferred technology for dust collection in the chemical processing industry. Combining high efficiency filtration with compact size and reduced pressure drop, a high efficiency cartridge dust collector will in most cases be the system of choice.

    Choosing the best cartridge collection system for a given application, however, involves research and attention to detail. This article will review four key areas of investigation. By reviewing these topics with a knowledgeable equipment supplier and knowing the right questions to ask, chemical manufacturing professionals will be better equipped to make informed dust collection decisions. Download this whitepaper now.

    Camfil Farr
  • Chemical Processing Special Report: Compressed Air

    Chemical manufacturers today are looking at all aspects of their business to conserve energy and decrease costs. Compressed air is often over looked in these efforts as many people do not fully understand compressed air equipment, their own system, or what it costs to produce compressed air power. In this Special Report, we review compressed air and provide insights on how to understand equipment and identify potential areas for savings.

    Atlas Copco
  • Spray Gas Quench Design Considerations

    The use of spray nozzles to rapidly cool or quench gas streams is an essential application in many industrial processes, such as chemical reaction vessels, incineration, and power plant absorber gas inlet. An optimized spray quench design requires engineering analysis of the operating environment, spray nozzle performance and process reliability. This technical paper describes the design considerations for spray gas quench systems such as nozzle selection, process control, system configuration and reliability. Application of this knowledge can result in a gas quench system that operates efficiently and reliably with reduced vessel size, reduced atomization energy consumption, and minimized downtime, to achieve capital and operational cost savings for your process.

    Bete Fog
  • Design Considerations for High Liquid Rate Tray Applications

    Except for a few odd services, high liquid rate applications are typically the domain of either trays or random packings. Aside from the distributors, random packing designs are rather straightforward with the designer choosing the proper size to accommodate the fluid flow rates and achieve the desired efficiency. Trays, on the other hand, have a large variety of adjustable parameters and can be especially complex, especially when designed for high liquid rate applications.

    Sulzer Chemtech USA, Inc.
  • Removing Liquid From Gas

    Liquid entrainment in a gas stream can be a disturbance in many industrial processes. In natural-gas processing, higher-order hydrocarbons, water or impurities have to be separated from the main methane stream. Upstream of gas compressors, droplets that can damage the impellers, have to be removed. With the recently acquired Knitmesh technology and the strategic alliance with Shell Global Solutions, Sulzer Chemtech can supply a broad portfolio of advanced, tailor-made systems for gas/liquid separation to customers in all industries.

    Sulzer Chemtech USA
  • The fan repair and rebuild experts

    Before you order brand-new air-moving equipment to replace your worn, corroded, unbalanced equipment, consider the potential benefits of repairing or rebuilding that equipment.

    Robinson Industries Inc.
  • Oxygen in cell culture/venting ozonated vessels

    This white paper outlines trends and opportunities for gasket standardization in processing plants ... including the potential for more reliable sealing, cost savings, inventory reduction, easier installation and safety practices. Steps are outlined for achieving success in gasket standardization across steel, glass-lined and FRP piping.

    W. L. Gore & Associates, Inc.
  • Gasket Standardization in the CPI

    This white paper outlines trends and opportunities for gasket standardization in processing plants ... including steps outlining how to achieve gasket standardization across steel, glass-lined and FRP piping.

    W. L. Gore & Associates, Inc.
1-20 of 34 < first | prev | | last >