Process Engineering White Papers

21-33 of 33 < first | | next | last >
  • Optimizing the Mixing of Powders into Liquids – Dust-free Induction and Dispersion

    Mixing of powders into liquids should be relatively easy. You pour powder onto the liquid's surface and then mix it in. However, this mixing can be very troublesome in production. This paper examines the various factors involved with mixing powders into liquids and how to avoid potential problems.

    Powder Technologies, Inc.
    10/22/2012
  • CP Powder eHandbook: Effective Powder Processing

    As many chemical processors know, processing powders can be tricky. Powder properties can be affected if the materials are stored for long periods. Powders can be compressed, vibrated, aerated and exposed to moisture. And specific processes like granulation, blending, drying, milling, lubricating and compression put requirements on how powders can be handled. In this Chemical Processing Powder eHandbook, we take a look at how to effectively process powder including:
    • Compression dryers – the case for choosing a solution that produces optimal air quality and low energy consumption
    • GHS – understanding the requirements and what it means to chemicals processors
    • Predicting powder flow behavior
    • Vibratory screen cleaning methods
    • Fine powder flushing - eliminating a common bin-afflicting problem caused by trapped air
    • Tubular Drag Conveying Technology – an alternative to pneumatic conveying
    • Addressing dust hazards – including explosions

    08/28/2012
  • Fired Up: Combustible Dust Raises Explosive Issues

    Combustible dust fires happen in plants everyday. This white paper helps manufacturers learn more about combustible dust hazards and ways to handle combustible dust in your manufacturing plant in order to comply with OSHA's NEP. Learn more about choosing the right cleaning tools for your facility.

    Nilfisk Industrial Vacuums
    07/25/2012
  • Heating Water by Direct Steam Injection

    Direct steam injection provides a solution where large volumes of hot water at precise temperatures are required, and saving space and energy are factors in the system design.

    Pick Heaters
    05/03/2012
  • CP Powder eHandbook: Tips for Effective and Safe Handling of Solids

    One of the trickiest materials to process, solids are comprised of powders or particulates, a continuous gaseous phase (usually air) and, almost always, a liquid component. Processors that handle solids know only too well the types of throughput problems that come up on a recurring basis. Effective, economical and safe slurry management; flowability during processing, accurate inventory and volume level management are all very real challenges faced by processors of solids. In this Chemical Processing Powder eHandbook, we take a look at how to effectively handle solids including:
    • Properly accounting for how bulk solids actually will flow in a vessel or overall process -- we take a look at some simple parameters that can often provide a good sense of flowability
    • Strategies for avoiding slurry trouble
    • Mitigating pipe segment force imbalances with Reactor Excursion and Leakage Analysis Program
    • Acoustics-based level measurement for accurate powder measurement in bins, tanks and silos
    • Explosion protection methods including suppression, isolation and venting

    05/01/2012
  • Chemical Processing Powder eHandbook: Succeed at Solids Handling

    One of the trickiest materials to process, solids are comprised of powders or particulates, a continuous gaseous phase (usually air) and, almost always, a liquid component. Processors that handle solids know only too well the types of throughput problems that come up on a recurring basis. Clumping; effective, economical and safe slurry mixing; dust management and dust explosion risk mitigation are all very real challenges faced by processors of solids. In this Chemical Processing Powder eHandbook, we take a look at how to effectively handle solids including:
    • Clumping – the 10 most common sources of agglomeration in bulk solids and how to effectively manage them
    • Strategies for optimal slurry mixing
    • Level management detection in storage vessels
    • Dust explosion risks – how to identify and mitigate when processing solids
    • Managing solid cohesiveness with flow strategies

    Download your copy of this Chemical Processing Powder eHandbook now.

     

    02/13/2012
  • What Does It Cost To Own Your Dust Collector Filters?

    When choosing filters for your cartridge dust collector, a Total Cost of Ownership (TCO) calculation allows you to make the most economical and sustainable choice. TCO is a step-by-step evaluation that explores energy use, maintenance and other factors to compare the real costs of operating a dust collector with different filters. This white paper explains how to perform TCO calculations to save money, time and energy.

    Camfil Farr APC
    03/04/2011
  • The fan repair and rebuild experts

    Before you order brand-new air-moving equipment to replace your worn, corroded, unbalanced equipment, consider the potential benefits of repairing or rebuilding that equipment.

    Robinson Industries Inc.
    01/01/2007
  • Preventing Segregation During Powder Drying

    This 4-page case history by Jeroen van den Berg of Bolz-Summix discusses how changing process conditions within a conical screw dryer eliminated granulation and minimized product segregation.

    Bolz-Summix
    05/02/2006
  • How to Choose a Vacuum Dryer

    Vacuum drying can be applied in a range of processes in several industries, including chemical, pharmaceutical, food, plastics, and metal powders. This article first discusses vacuum drying benefits and limitations and dryer components and operation, then explains the differences between tumble and agitated vacuum dryers and how you can select one for your application.

    11/19/2004
21-33 of 33 < first | | next | last >