Process Engineering White Papers

101-105 of 105 < first | | next | last >
  • Achieve 21 CFR Part 11 Compliance

    This technical white paper discusses Yokogawa’s CENTUM CS 3000 R3 DCS (Distributed Control System) product and the extent of its compliance with Part 11 of Title 21 of the Code of Federal Regulations (21 CFR Part 11), the Electronic Records/Electronic Signatures Rule.

    10/12/2004
  • Design the Heat-Transfer-System Expansion Tank Right

    The design of the expansion tank plays an important role in the successful operation of a heat transfer system using organic fluids. It can contribute to longer fluid life and lower maintenance. This paper describes the proper sizing, piping and valving, instrumenting, and inerting of the tank.

    Solutia
    10/11/2004
  • Succeed at Alarm Management

    Today's control system make it easy to add alarms. The result has been a proliferation of alarms that can overwhelm an operator and actually obscure situations that really require immediate attention. This paper provides practical guidance on effective procedures that can significantly reduce nuisance alarms and improve operator effectiveness.

    D. Shook, PhD, P.Eng., Matrikon, Inc.
    10/11/2004
  • Selecting Transmitters for Safety Instrumented Systems

    This paper presents best practices that allow the user to quantify the impact of real-world failure causes and to take credit for improvements in system design. Besides selection, it also covers installation and maintenance.

    DuPont Fluoroproducts and Rosemount Inc
    08/27/2004
101-105 of 105 < first | | next | last >