OSHA & NFPA Compliant: Keeping Your Plant Safe
In March 2008, OSHA reissued its Combustible Dust National Emphasis Program (NEP) notifying approximately 30,000 companies nationwide that they will be targeted for inspections over the next few years. Mettler Toledo recognizes that many manufacturers are not up-to-date on the latest hazardous area compliance regulations or may not know that their industry is subject to those regulations. Don't wait until your facility receives a surprise visit from OSHA or worse yet, for a catastrophic incident to occur. Take the proactive approach to addressing the "hazardous area advisory level" in your facility.
The Green Solution
The ever present emphasis on technological efficiency is just one of several forces behind the pressure on companies to "go green" despite a trying economy. The ultimate criterion that determines whether a motor is truly green is energy efficiency. Technology, long the key to efficiency, can help resolve this issue.
Unwelcome oxygen Tank blanketing is the process of filling the headspace in storage vessels and reactors with an inert gas to prevent its contents from exploding, degrading or polymerizing and to protect equipment from corrosion. A blanketing system is normally designed such that it operates under higher than atmospheric pressures, therefore preventing outside air from entering the vessel. As oxygen and moisture in the air can be undesired in numerous processes and applications, blanketing is done in a wide range of industries, varying from (petro)chemical to food and beverage, pharmaceutical to pure water.
Choosing the Right Emissions Control Option
Determining the most economical option to control airborne emissions during chemical process operations presents several unique challenges. As with any add-on control system, the goal is to minimize the annualized total costs while maintaining proper operation. In this white paper, learn the different options that are available and which ones fit your process the best.
Durr Systems Inc.
Environmental Health and Safety Compliance in Biotech Companies: Common Deficiencies Encountered During Audits
Environmental health and safety (EH&S) compliance programs for companies that house laboratories are complex and not easily maintained. Even the most basic plan involves keeping a variety of permits up-to-date, performing regular employee training, conducting inspections, complying with a myriad of chemical storage and handling requirements, and keeping a number of contingency plans current and complete. This white paper identifies the most common pitfalls and four simple steps to keeping your EH&S program current.
Environmental Health and Engineering
Guidance note for environmental safety instrumented systems
Safety Instrumented Systems (SIS) are designed to monitor the process and control outputs to prevent or mitigate hazardous events. The design process strives for inherent safety, which is enhanced by applying multiple independent safety layers. Learn how to prevent accidents with prevention layers and minimise the consequences with mitigation layers.
P & I Design
Chemical Hazard Communication
Under the provisions of the Hazard Communication Standard,
employers are responsible for informing employees of the
hazards and the identities of workplace chemicals to which
they are exposed.
The Regional Transport of Ozone
EPA tracks emissions of six principal air pollutants - carbon monoxide, lead, nitrogen oxides, particulate matter, sulfur dioxide, and volatile organic compounds. All have decreased significantly since passage of the Clean Air Act in 1970 - except for nitrogen oxides.
Hazard Communication Guidelines for Compliance
OSHAs Hazard Communication Standard (HCS) is based on a simple conceptthat employees have both a need and a right to know the hazards and identities of the chemicals they are exposed to when working.
Taking Toxics Out of the Air
This 34-page PDF white paper discusses the technology and performance-based standards implemented by the EPA during the last 10 years and how they will assist in removing harmful toxins from the air.
Continuous PHA Revalidation
A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.
Facility Major Risk Survey
This 8-page primer describes a method for identification of major acute risks in existing process facilities that can potentially affect on-site and off-site populations and for prioritization of mitigation methods.
Relief Design for Reactive Systems Get the Facts
This 15-page paper focuses on the additional degrees of complexity that reactive systems pose for emergency relief systems. It covers topics such as how to screen for reactivity and what practices, standards and regulations should be followed, as well as a host of other issues.
Why Process Safety Management Audits Fail
Most companies have completed at least three process safety management(PSM) compliance audits of their covered facilities since the promulgation of the OSHA PSM standard. These companies, however, are not seeing noticeable improvements in their PSM programs. In fact, many companies feel that their PSM programs have become less effective. What has happened and why? Are there any lessons learned from the Enron collapse and its auditing program? What needs to be done?