Process Engineering White Papers

321-340 of 342 < first | | | last >
  • Application of Fingerprints to Increase Security

    This 9-page paper summarizes the various applications and benefits of the use of fingerprints to restrict access to information and transactions. It covers access via the Internet and other networks as well as physical access.

    10/15/2004
  • Control System Security: Interacting with IT

    Operations staff and plant engineers also have a keen interest in the security of control networks. They are responsible for the reliability, availability, safety and integrity of the process. Their facilities are the ones producing products and earning revenues, so their concerns, priorities and knowledge must also be considered when determining security options.

    10/15/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Design Tips for Admittance Probes

    This white paper from Delta Controls outlines a range of selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 common industrial materials are included.

    10/15/2004
  • Push Maintenance: The New Frontier in Asset Management

    The convergence of innovative technologies using open industry standards simplifies communication between software and technology. Now you can centralize key performance diagnostics, push critical information to the workforce, and problems can be solved from anywhere.

    10/15/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Achieve 21 CFR Part 11 Compliance

    This technical white paper discusses Yokogawa’s CENTUM CS 3000 R3 DCS (Distributed Control System) product and the extent of its compliance with Part 11 of Title 21 of the Code of Federal Regulations (21 CFR Part 11), the Electronic Records/Electronic Signatures Rule.

    10/12/2004
  • Design the Heat-Transfer-System Expansion Tank Right

    The design of the expansion tank plays an important role in the successful operation of a heat transfer system using organic fluids. It can contribute to longer fluid life and lower maintenance. This paper describes the proper sizing, piping and valving, instrumenting, and inerting of the tank.

    Solutia
    10/11/2004
  • Understand Heat-Transfer-Fluid Maximum Temperature Rating

    Manufacturers of heat transfer fluids assign a maximum temperature rating to each fluid. This rating must be considered to ensure the safe and efficient operation of the fluid. This paper explains the basis of the rating, how fluids degrade, and how the temperature profile in a heat transfer system affects fluid performance and life.

    Therminol
    10/11/2004
  • Properly Model and Control Batch Reactors

    This paper covers key aspects for modeling and design of batch reactors, including: heat-up and cool-down performance, sensitivity analysis for reactor parameters, boil-up rate predictions, thermal stability under exothermic conditions, control system design and loop tuning parameters, condenser rating, and process emissions predictions.

    10/11/2004
  • Process Safety Management

    This guide from the U. S. Occupational Safety and Health Administration covers pre-startup safety review, mechanical integrity, how-work permits, management of change, incident investigation, emergency planning and response and compliance audits, among other topics.

    10/11/2004
  • Succeed at Alarm Management

    Today's control system make it easy to add alarms. The result has been a proliferation of alarms that can overwhelm an operator and actually obscure situations that really require immediate attention. This paper provides practical guidance on effective procedures that can significantly reduce nuisance alarms and improve operator effectiveness.

    D. Shook, PhD, P.Eng., Matrikon, Inc.
    10/11/2004
  • Properly Model and Design Shell-and-Tube Heat Exchangers

    Shell-and-tube heat exchangers are widely used throughout the chemical industry. This paper provides a review of the key issues involved in their thermal design. It covers both process and mechanical issues, and discusses appropriate methods for determining various parameters.

    10/11/2004
  • Beyond the Resource Conservation and Recovery Act

    The EPA provides a vision of where waste and materials management is headed in 2020, covering issues like sustainable use of resources and the life-cycle approach to managing chemical risk.

    10/11/2004
  • Permit-Required Confined Spaces

    This new U. S. Occupational Safety and Health Administration paper describes OHSA's confined-space satndard, and discusses how to meet it by controlling hazards, administering entry permits and assigning duties, as well as how to deal with emergencies and OSHA assistance available.

    10/11/2004
  • Properly Clean Organic Heat Transfer Fluid Systems

    Maintaining peak performance of organic heat transfer fluids can require removal of dirt and pipe scale, oxidation, thermal degradation, and process contamination. This paper describes the appropriate cleaning techniques for dealing with solids; sludge, high-viscosity fluid and residues; process contamination; and hard coke.

    09/10/2004
  • Succeed at Dynamic Modeling of Batch Reactors and Batch Distillation

    This paper reviews the basic techniques for dynamic modeling of these two key operations. It covers considerations related to heat transfer, reaction chemistry, mass balances and the control system. It also discusses equipment configurations, performance characteristics and operational constraints.

    09/08/2004
  • Selecting Transmitters for Safety Instrumented Systems

    This paper presents best practices that allow the user to quantify the impact of real-world failure causes and to take credit for improvements in system design. Besides selection, it also covers installation and maintenance.

    DuPont Fluoroproducts and Rosemount Inc
    08/27/2004
321-340 of 342 < first | | | last >