Process Engineering White Papers

281-300 of 341 < first | | | last >
  • Understanding and preventing fine powder flushing

    This nine-page whitepaper discusses the sources of powder flooding, the dangers it can pose to your equipment and the steps you can take to prevent it from happening.

    Diamondback Technology
    03/01/2005
  • Understanding alarm management

    This nine-page PDF whitepaper discusses the pitfalls of alarm management and how mistakes in the past have been quite costly. It then addresses these mistakes and gives an overview of proper alarm management.

    4-sight Consulting
    02/10/2005
  • Eliminating arching hangups in hoppers

    This short two-page PDF whitepaper first discusses how an arch develops within a hopper and then disusses strategies for effectively removing them.

    Diamondback Technology
    01/31/2005
  • How to control a process with long dead time

    A process with a large dead time presents a special challenge for a controller --  any controller. This short paper explains how to get the best control of large dead time processes.

    ExperTune
    01/11/2005
  • Theory and practice of pH measurement

    This 43-page guide covers the basic mechanism of pH measurement, the structure of the sensor and its fundamental limitations, and also provides installation, maintenance and troubleshooting guidance.

    Rosemount Analytical
    01/04/2005
  • Level measurement of bulk solids and powders

    This 26-page white paper from Monitor Technologies discusses the difficulties in measuring bulk solids and powders in bins, silos and hoppers.  Download this document to learn which technologies are out there that can make this job easier.

    Monitor Technologies
    01/03/2005
  • Tracing the accuracy of calibration gases

    Calibrating your instruments using specialty gas will only yield results as accurate as your gas mixture. This three-page white paper discusses analytic traceability and how it relates to gas mixture accuracy.

    12/29/2004
  • Understand the hazards of flammable liquid spills

    This short paper discusses the risks of flash fires and pool fires from spills of flammable liquids, preventative measures, as well as how to avoid hazards during the clean up of such spills.

    Chilworth Technology
    12/09/2004
  • Management of Change or Change of Management?

    Management of Change processes are subject to a variety of pitfalls. This paper highspots a variety of implementation issues that can frequently undermine the success of MOC processes.

    ioMosaic
    12/03/2004
  • Continuous PHA Revalidation

    A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.

    12/03/2004
  • Facility Major Risk Survey

    This 8-page primer describes a method for identification of major acute risks in existing process facilities that can potentially affect on-site and off-site populations and for prioritization of mitigation methods.

    ioMosaic
    12/02/2004
  • Security Vulnerability Analysis

    Plant security is a key priority at many plants. This 10-page paper provides background what the methodology for a plant vulnerability analysis involves. It covers topics such as how to get started, available tools, and risk assessment.

    12/02/2004
281-300 of 341 < first | | | last >