Process Engineering White Papers

1-11 of 11 < first | prev | next | last >
  • Process Filtration Scale-Up from Lab to Commercial Operation

    This article discusses process filtration approach developed for each technology stage starting from batch filtration in the lab to continuous filtration for the full-scale commercial operation. Process engineers must not “jump to conclusions”, a reference from Sherlock Holmes and Dr. John Watson who prove time and again is that there is no benefit to jumping to conclusions. Therefore, laboratory / bench top filtration testing is covered for problem analysis, technology selection and pilot and demonstration scale-up. The paper continues with the filtration testing and then scale-up to the commercial size. Finally, the paper concludes with a general review of the problem-solving skills of Holmes and Watson and how these skills can be utilized by process engineers as a framework for “idea-generation” when analyzing a new process scale-up.

    Download now.

    BHS
    06/02/2015
  • Process Filtration Technology: Making Informed Decisions

    Solid-liquid separation is an instrumental part of chemical processing. To separate the solid particles, filter media made of textile or metallic materials and of composite materials are used as the basis for the filter cake. Often there will also be a washing process to improve the purity of the filter cake or to increase the yield of the liquid phase. Solid-liquid separation can be carried out in continuous or batch operation. There are many factors for selecting the right process filtration system for your specific application. This white paper reviews methods for identifying the right process filtration technology for your application and highlights case studies illustrating the methods discussed.

    02/25/2014
  • A Treatise of Filter Cake Washing Mechanisms in Pressure and Vacuum Filtration Systems

    During many chemical operations, cake washing is required since no filter system can remove all of the mother liquor by pressure or vacuum dewatering only. The topic of how to most efficiently wash the cake is important. This article introduces pragmatism into cake washing theory and will help engineers during their decision-making processes.

    BHS Filtration
    05/13/2011
  • What Does It Cost To Own Your Dust Collector Filters?

    When choosing filters for your cartridge dust collector, a Total Cost of Ownership (TCO) calculation allows you to make the most economical and sustainable choice. TCO is a step-by-step evaluation that explores energy use, maintenance and other factors to compare the real costs of operating a dust collector with different filters. This white paper explains how to perform TCO calculations to save money, time and energy.

    Camfil Farr APC
    03/04/2011
  • The effects of antifoams on ultrafiltration membranes

    This paper discusses the problem of membrane fouling by antifoams, its leading causes and describes the development of a nonfouling antifoam for processes that use ultrafiltration downstream.

    Dow Corning Corporation
    09/22/2006
  • Clean-in-place operation for thin-cake filtration technologies

    This article discusses the choice of thin-cake (2 – 25 mm) separation technologies and their benefits to optimizing the effectiveness of the production process. The paper continues with a discussion of clean-in-place operations to meet current Good Manufacturing Practices (cGMP) guidelines including riboflavin test and validations.

    BHS-Filtration
    04/20/2006
  • Level measurement of bulk solids and powders

    This 26-page white paper from Monitor Technologies discusses the difficulties in measuring bulk solids and powders in bins, silos and hoppers.  Download this document to learn which technologies are out there that can make this job easier.

    Monitor Technologies
    01/03/2005
  • Nonwoven Fabric Filtration Media

    This 6-page primer explains the various forms of nonwoven media, their special characteristics, as well as filter configurations and function. It discusses advantages and disadvantages, and application trends.

    Edward C. Gregor
    10/15/2004
1-11 of 11 < first | prev | next | last >