Energy consumption remains one of the largest controllable costs in oil refineries. Heat exchanger fouling can have a significant impact on energy efficiency and production loss. Asphaltene Precipitation is caused when refiners blend incompatible crudes. This is a major source of fouling and leads to performance limitations within days. Heat exchanger fouling is a major challenge for refinery operations. With the increase in crude blending from opportunity crudes such as tight oil, the traditional “manual” monitoring approach may no longer be effective. This White Paper discusses how on-line monitoring and analysis can enable refineries to:
Better Understand Accelerated Fouling Due to Crude Incompatibilities
Learn How to Use Online Monitoring to Detect Fouling
For chemical processors, changing process conditions demand quick responses in order to keep processing effective and to keep processes running properly. For processes undergoing such changes, accurate and timely measurements, such as vibration monitoring, redundant tank level measurement and steam header temperature profiling can be difficult to collect. In well-established plants it’s both very expensive and time consuming to get measurement points online using conventional wired instrumentation. Many processors are now turning to wireless devices that can supply data from numerous points that never could have been justified otherwise. In this Chemical Processing Wireless eHandbook we take a look at wireless technology solution successes:
** How installing a wireless pH analyzer for crucial insights on seal integrity provided Fuji Film with a low-cost monitoring solution for protecting a pricey pump ** How one of the world’s largest producers of chlorine, caustic soda and vinyl chloride embraced wireless technology and achieved operating economies and more efficient control of its chemical processes ** More!
Productivity Improvement with Wireless Steam
When steam traps leak or fail, energy is lost and there could also be steam equipment failure or damage and potential safety hazards. A major food manufacturer improved their steam trap program and enhanced their ongoing leak repair campaign with remote steam trap monitoring using Smart Wireless Solutions from Emerson.
Continuous Valve Monitoring for Product Loss Prevention, Emission Reduction and ROI
One of the challenges that companies have faced in implementation of continuous monitoring systems is the lack of infrastructure for sensing and data collection. The devices to be monitored are widely dispersed throughout plants with large areas, have no existing power or signal transmitting wire infrastructure, so the capital costs associated with the power and communication services have historically prohibited continuous monitoring. This white paper will unearth best practices to prevent product loss, reduce emissions and ensure ROI.
Using Operator Interfaces to Optimize Performance of Industrial Wireless Networks
The performance of wireless networks can change over time due to increased performance demands, changes in the radio frequency (RF) environment and changes in the physical environment. This article will explore the use of a wireless diagnostic OLE for Process Control (OPC) server technology to embed diagnostic information in human machine interfaces (HMIs), thus optimizing industrial wireless network performance.
Jim Ralston, Wireless Sales Engineer, ProSoft Tech...
Why WirelessHART? The Right Standard at the Right Time
The WirelessHART standard provides a robust wireless protocol for the full range of process measurement, control and asset management applications. Based on the proven and familiar HART protocol, it enables users to quickly and easily gain the benefits of wireless technology while maintaining compatibility with existing devices, tools and systems.
HART Communication Foundation
Preparing for industrial wireless
Plants across the world are increasingly having to make thedecision to implement wireless technology in their industrial facilities. The right decision enables an infrastructure that provides significant benefits from wire savings to improved operations. Wireless is a complex enabling technology that requires many considerations before broad deployment in an industrial facility.