Whitepaper: On-Line Instrumentation Helps Lower DAF System Costs
Many industrial plants use dissolved air flotation to remove fats, oils and grease, and suspended solids from wastewater. Chemical additions are often kept higher than necessary to account for variations in influent water quality that are characteristic of industrial facilities. Continuous monitor
Chemical Processing Flow eHandbook: Monitoring Flow
The purpose of installing a flowmeter system is to accurately measure flow in a reliable manner. Issues related to physical properties, process parameters, electronic features and interconnections are often given much consideration. Relatively little emphasis, however, is given as to how well the flowmeter will perform its intended purpose. Adding to the confusion are the differences in how performance is expressed and the incomplete nature of the available information. Nevertheless, the quality of flow measurement should be a concern. This Chemical Processing eHandbook takes a look at technologies and solutions affecting flow including:
* Coriolis meters - steps you can take optimize performance when faced with entrained gas
* Magmeters -- why you should consider using them
* How to achieve effective flow control with centrifugal pumps
Maximizing Power from Biomass
Implementation of rapid loss on drying and ash analyzers significantly reduces testing times associated with traditional methods, allowing companies to bring products to market faster, increasing production. These features will aide biomass material manufacturers in maximizing control of the market.
Theory and practice of pH measurement
This 43-page guide covers the basic mechanism of pH measurement, the structure of the sensor and its fundamental limitations, and also provides installation, maintenance and troubleshooting guidance.
Tracing the accuracy of calibration gases
Calibrating your instruments using specialty gas will only yield results as accurate as your gas mixture. This three-page white paper discusses analytic traceability and how it relates to gas mixture accuracy.
Selecting Transmitters for Safety Instrumented Systems
This paper presents best practices that allow the user to quantify the impact of real-world failure causes and to take credit for improvements in system design. Besides selection, it also covers installation and maintenance.