Process Engineering White Papers

221-240 of 265 < first | | | last >
  • Fieldbus and remote I/O system comparison

    Nine manufacturers participated in the FuRIOS study, which was conduced under the lead of an end user company that compared its use of fieldbus and remote I/O in full detail.

    Aventis, Infraserv GmbH
    02/10/2006
  • The Regional Transport of Ozone

    EPA tracks emissions of six principal air pollutants - carbon monoxide, lead, nitrogen oxides, particulate matter, sulfur dioxide, and volatile organic compounds. All have decreased significantly since passage of the Clean Air Act in 1970 - except for nitrogen oxides.

    EPA
    01/31/2006
  • Process Control Network Security - Reference Architecture

    This document describes best practices for the reference architecture for a process control system network and its interfaces to a corporate network. The paper’s objective is to give the reader an understanding of the techniques utilized to securely connect these networks.

    Invensys
    01/11/2006
  • Design Tips for Sensing Probes

    This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.

    Delta Controls
    01/05/2006
  • Specifying industrial fieldbus networks for automation

    Automation designers face many challenges and tradeoffs in the development of a successful network solution. This white paper discusses the necessary choices in selecting a network technology appropriate for various specific applications.

    Texas Instruments
    10/12/2005
  • Measurement Best Practices

    This 9-page PDF discusses way in which you can ensure your measurements are accurate, repeatable and reliable.

    Rosemount
    10/05/2005
  • Securing Process Control Network External Communications

    In the real world, sharing PCN data with external systems and accessing PCN systems from external sources is fast becoming a business necessity. This paper provides some generic guidelines for enabling secure connectivity between PCNs and external systems.

    Honeywell
    09/16/2005
  • PACs for industrial control: The future of control

    With a number of vendors producing Programmable Automation Controllers that combine the functionality of a PC and reliability of a PLC, PACs today are increasingly being incorporated into control systems. This white paper explores the origins of the PAC, how PACs differ from PLCs and PCs, and the future direction of industrial control with PACs.

    National Instruments
    09/14/2005
  • Hazard Communication Guidelines for Compliance

    OSHA’s Hazard Communication Standard (HCS) is based on a simple concept—that employees have both a need and a right to know the hazards and identities of the chemicals they are exposed to when working.

    OSHA
    08/30/2005
  • Electro-hydraulic system design: Making the right system choices

    Designers who understand and can take advantage of the differences between fluid power and traditional electromechanical power can build machines that produce higher quality output with lower lifecycle costs. This white paper suggests that care must be taken, however, in selecting and sizing the hydraulic system elements and in tuning the motion controller for optimal performance.

    Delta Computer Systems
    08/16/2005
  • Design Tips for Selecting Sensing Probes

    This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.

    Delta Controls
    07/05/2005
  • How to control a process with long dead time

    A process with a large dead time presents a special challenge for a controller --  any controller. This short paper explains how to get the best control of large dead time processes.

    ExperTune
    01/11/2005
  • Level measurement of bulk solids and powders

    This 26-page white paper from Monitor Technologies discusses the difficulties in measuring bulk solids and powders in bins, silos and hoppers.  Download this document to learn which technologies are out there that can make this job easier.

    Monitor Technologies
    01/03/2005
  • Understand the hazards of flammable liquid spills

    This short paper discusses the risks of flash fires and pool fires from spills of flammable liquids, preventative measures, as well as how to avoid hazards during the clean up of such spills.

    Chilworth Technology
    12/09/2004
221-240 of 265 < first | | | last >