Specifying industrial fieldbus networks for automation
Automation designers face many challenges and tradeoffs in the development of a successful network solution. This white paper discusses the necessary choices in selecting a network technology appropriate for various specific applications.
Measurement Best Practices
This 9-page PDF discusses way in which you can ensure your measurements are accurate, repeatable and reliable.
Securing Process Control Network External Communications
In the real world, sharing PCN data with external systems and accessing PCN systems from external
sources is fast becoming a business necessity. This paper provides some generic guidelines for enabling
secure connectivity between PCNs and external systems.
PACs for industrial control: The future of control
With a number of vendors producing Programmable Automation Controllers that combine the functionality of a PC and reliability of a PLC, PACs today are increasingly being incorporated into control systems. This white paper explores the origins of the PAC, how PACs differ from PLCs and PCs, and the future direction of industrial control with PACs.
Hazard Communication Guidelines for Compliance
OSHAs Hazard Communication Standard (HCS) is based on a simple conceptthat employees have both a need and a right to know the hazards and identities of the chemicals they are exposed to when working.
Electro-hydraulic system design: Making the right system choices
Designers who understand and can take advantage of the differences between fluid power and traditional electromechanical power can build machines that produce higher quality output with lower lifecycle costs. This white paper suggests that care must be taken, however, in selecting and sizing the hydraulic system elements and in tuning the motion controller for optimal performance.
Design Tips for Selecting Sensing Probes
This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.
How to control a process with long dead time
A process with a large dead time presents a special challenge for a controller -- any controller. This short paper explains how to get the best control of large dead time processes.
Level measurement of bulk solids and powders
This 26-page white paper from Monitor Technologies discusses the difficulties in measuring bulk solids and powders in bins, silos and hoppers. Download this document to learn which technologies are out there that can make this job easier.
Continuous PHA Revalidation
A process hazard analysis must be revalidated every five years. This paper discusses the merits of a new approach aimed at increasing the effectiveness of PHAs, called Continuous PHA revalidation.
Facility Major Risk Survey
This 8-page primer describes a method for identification of major acute risks in existing process facilities that can potentially affect on-site and off-site populations and for prioritization of mitigation methods.