Process Engineering White Papers

21-40 of 200 < first | | | last >
  • Tank Blanketing in Hydrocarbon Processing Facilities

    During industrial manufacturing, many companies use a wide variety of chemicals from methanol, acetone and benzene to foodstuffs like wine and edible oils stored in large tanks at different points in the manufacturing process. In a technique called “chemical tank blanketing,” or “padding” nitrogen is commonly applied to protect chemicals stored in tanks against contamination, degradation or chemical change as well as to prevent fire or explosions. This white paper first discusses blanketing basics and benefits. It reviews considerations for tank blanketing  systems and discusses a newer approach, which is typically more  cost effective for most applications, is that of generating nitrogen on-demand in the plant itself.

    09/12/2014
  • Research Paper: Investigating the Relationship between Gypsum Purity and Hydrogen Sulfide Production under Anaerobic Conditions

    Calcium Sulfate (CaSO4) more commonly known as gypsum is a naturally occurring white crystalline mineral that has many different uses and applications. Gypsum in its hydrated form (CaSO4•2H2O) is used in the construction industry for fire resistance in buildings. Outside of the construction industry, gypsum is used in the food and fertilizer industry for calcium and sulfate fortification respectively. When gypsum is no longer usable, it is deposited in construction and demolition(C&D) landfills where anaerobic (low oxygen) conditions and the presence of sulfate-reducing bacteria promote the decomposition of wallboard/gypsum into hydrogen sulfide gas (H2S). Due to local and state regulations on odor control, these C&D sites monitor their fill for hydrogen sulfide gas.  This paper will couple two methods of analysis to observe the relationship between the purity of gypsum (calcium sulfate dihydrate) and hydrogen sulfide concentration as a sample is fermented by sulfate-reducing agents (e.g. bacteria). The scope of this research may be beneficial for industrial hygienists concerned with C&D landfill H2S levels or for incoming gypsum processing plants who suspect poor quality gypsum.

    09/12/2014
  • Level eHandbook: Tackle Level Management Challenges

    Level measurement, which is the detection of the phase split between vapor/liquid, liquid/liquid, vapor/solid and even liquid/solid, is a key parameter in the operation and control of modern industrial processes. A reliable outcome depends on the phase conditions being relatively consistent under all process conditions. Unfortunately, the importance of level control isn’t always understood. Failure to measure level reliably has resulted in some of the most serious industrial accidents, including those at the Buncefield, U.K., fuel storage depot and BP’s Texas City refinery. In this Chemical Processing Level Management eHandbook, we discuss best practices for level management including:

    • How to Select the Right Liquid Level Sensor - It’s important to consider a variety of factors when choosing the type of technology
    • Multivariable devices - gain operating and maintenance benefits
    • Achieving level control with dP transmitters - it appears simple but really is not

    Download your copy of this Chemical Processing Process Level Management eHandbook now.

    08/20/2014
  • eHandbook: Make the Right Moves with Powders

    When designing a system to transport powders and granules there is a wide variety of considerations. Different applications, installation environments, equipment, material characteristics and how they may change during the process are all part of the equation. While many plants aim to keep costs low and often times use old equipment for a new project this can also further compound a complex challenge. And that's not even taking in to consideration our increased awareness of the risks of an explosion and the need to avoid hazardous emissions. In this Chemical Processing Powder eHandbook, we take a look at key considerations affecting today’s best practices for transporting and processing powders and granules including:

    • Installing pneumatic conveyors correctly - 10 steps to prevent a variety of common problems
    • How to understand accuracy in a bin level monitoring system
    • Tubular drag conveying - an alternative to pneumatic conveying
    • Vacuum Conveying equipment and the issues of safety, security and sanitation

    Learn how to process powders efficiently. Download your copy of this Chemical Processing Powder eHandbook now.

    08/13/2014
  • eHandbook: How To Fight Flow Challenges

    In addition to flow pressure, volume and material state, achieving and maintaining desired flow performance depends upon properly addressing some complicated design and operational issues. In this Chemical Processing Flow eHandbook, we identify strategies and solutions for aerodynamic, technical, mechanical and economic constraints including:
     
    Hydrogen systems – Inspections and tests for ensuring safety and flow
    Axial compressors – achieving and maintaining desired performance
    Fight flow recirculation – why the phenomenon occurs in centrifugal pumps and how to correct it
     
    Learn more about these best flow practices. Download your copy of this Chemical Processing Flow eHandbook now.

    07/16/2014
  • The Perils of a DIY Distributed Control System

    The debate over the virtues of DCS vs. PLC has been ongoing since these two architectures came into existence 40 years ago. For certain industries, a distributed control system (DCS) provides substantially more value as the basis for automating the plant than a programmable logic controller (PLC)-based system. As functionality differences narrow and price points align, the debate over these virtues is getting more intense and the arguments for and against each system are getting more and more murky. This white paper discusses the “Top Ten” issues to consider when evaluating a DCS vs. building your own “DIY” distributed control system using a PLC-based architecture.

    Download white paper now.

    Honeywell
    07/15/2014
  • CP eHandbook: Widen Your Perspectives on Wastewater

    Treating and reusing process water is a multidimensional challenge for process plants. Compliance with regulatory requirements to prevent and mitigate industrial pollution can require significant capital investment as well as ongoing maintenance outlays. The increasing scarcity and cost of fresh water for production processes also compounds the problem. In this Chemical Processing Wastewater eHandbook we take a look at how to widen your perspective on wastewater including:

    • Optimizing water cleanup with activated carbon - including a few pointers to make the most of absorption systems
    • Improving plant performance with solids/turbidity monitoring - how continuous monitoring in the liquid processes stages of a wastewater treatment plant offers important benefits
    • How to solve partially filled pipe flow measurement challenges
    • How variable frequency drives can reduce installation and programming costs while providing a host of other benefits

    Download your copy of this Chemical Processing Water Wastewater eHandbook now.

    06/25/2014
  • Steam eHandbook: Best Practices for Steam Systems

    Operating and maintaining a reliable steam system is vital to chemical processing plants and can have significant cost impact on a plant's annual budget. Typical profit drainers in operating and maintaining a steam system include excessive fuel cost, inefficient steam generation, less-than-optimal steam utlization and poor condensate recovery. Ensuring adequate supply of steam often results in excessive capacity usage, expensive fuel choices or condensate draining to grade, leading to compromised efficiency levels and higher steam cost. Because steam systems dependency is unavoidalbe, addressing those three issues is crucial to minimizing steam costs.
    This Chemical Processing Steam eHandbook presents an overview, steam technologies and strategies for reducing cost associated with using and generating steam including:

    • Controlling steam system energy costs
    • Real-time monitoring - how wireless devices help cut energy losses by detecting failed steam traps
    • Additional resources

    Learn how to generate savings through steam use and generation. Download your copy of this Chemical Processing Steam eHandbook now.

    05/21/2014
  • Tips On Controlling Dissolved Oxygen in a Wastewater Treatment Plant

    Breakdown of organic wastes entering a wastewater treatment plant is accomplished by using a biomass or blend of beneficial microscopic organisms, bacteria, and solids. This converts the nonsettleable solids (dissolved and colloidal matter) into settleable solids, carbon dioxide, water, and energy. This paper reviews the most common stages for measuring and controlling dissolved oxygen in a wastewater treatment plant.

    Hach
    05/13/2014
  • Heat Exchanger Challenges with Light Tight Crude

    Energy consumption remains one of the largest controllable costs in oil refineries. Heat exchanger fouling can have a significant impact on energy efficiency and production loss. Asphaltene Precipitation is caused when refiners blend incompatible crudes. This is a major source of fouling and leads to performance limitations within days. Heat exchanger fouling is a major challenge for refinery operations. With the increase in crude blending from opportunity crudes such as tight oil, the traditional “manual” monitoring approach may no longer be effective. This White Paper discusses how on-line monitoring and analysis can enable refineries to:

    • Better Understand Accelerated Fouling Due to Crude  Incompatibilities
    • Learn How to Use Online Monitoring to Detect Fouling
    • Identify Which Tube Bundles Require Cleaning

    Emerson
    05/13/2014
  • Chemical Processing’s Powder eHandbook: Make the Most of Powder Processes

    Powders developed to meet certain product performance targets often suffer from inconsistent and unpredictable flow. The reasons for this are many. A material's characteristics - adhesiveness, cohesiveness, aeratability, pressure-sensitivity - often change during processing and can cause flow problems to crop up. Couple this with changes in the processes themselves and costly downtime can be the result. In this Chemical Processing Powder eHandbook, we take a look at strategies and solutions for overcoming powder processing challenges including:

    • Making the most of flow additives - understand their impact on overall powder behavior to optimize flow
    • Improving performance of gravimetric feeders - tips to avoid poor accuracy and frequent downtime
    • Protecting against combustible dust explosion - economical approaches for protecting spray dryer processes and solutions

    Make the most of your powder processes. Download your copy of this Chemical Processing Powder eHandbook now.
     

    04/24/2014
  • Chemical Processing’s eHandbook: Follow These Best Flow Practices

    Corrosion, leak detection and mitigation, flow pressure and volume are all factors that maintenance managers and other decision makers need to contend with as they manage flow at their chemical processing plants. In this Chemical Processing Flow eHandbook, we delve in to solutions and strategies for managing these challenges including:

    • Leak management - treat them as calls for action against the underlying problem
    • VFDs for centrifugal pumps - such drives may provide energy savings and avoid operating problems
    • Dealing with corrosion - piping made of high-performance plastic provides unmatched performance and longevity
    • Ceramic in electromagnetic flow meters - material used for measuring tubes offers high performance, longevity and a host of other benefits

    Learn more about these best flow practices. Download your copy of this Chemical Processing Flow eHandbook now.

    04/16/2014
  • CP Special Report: Improving Plant Efficiency and Safety

    Sponsored By: Parker

    Chemical plants vary widely in size and complexity yet share common goals for maximizing efficiency safely and cost effectively. This Chemical Processing Special Report tackles two areas in chemical processing - compressed air systems and powder handling - where gains can be achieved for improving efficiency. We also address the concerns of safety as it relates to drying compressed air in hazardous atmospheres.
     
    Key takeaways:

    • Whether compressed air systems are centrifugal, rotary screw, reciprocating compressors or a combination, this Special Report provides and understanding of what’s involved in getting a suitable supply of compressed air.
    • Efficient powder handling can be achieved through optimized humidity management.
    • Safe drying practices in hazardous air locations

    Parker
    04/15/2014
  • Chemical Processing Special Report: How to Succeed with VFDs

    Medium voltage variable frequency drives (VFDs) are often the best choice to capitalize on opportunities to significantly reduce the operating and maintenance costs associated with relatively large rotating equipment. Even a seemingly modest energy savings of a few percent of the operating load can translate into significant energy savings. In this special report we take a look at how to make the most of VFDs: how optimum performance depends upon proper installation and control; how controlling the speed of VFDs can help eliminate waste and promote efficiency, reliability and quality and; considerations for changing drive speed over pumps. Download now.

    03/25/2014
  • Loss on Drying vs. Thermogravimetric Analysis

    Synthesized is used in a variety of applications. The construction industry uses it as the primary ingredient in drywall, and as a setting inhibitor in Portland cement. The property of Gypsum that makes it valuable as a fire retardant in construction materials is also what makes it a good candidate for Loss on Drying analysis.

    Arizona Instrument
    03/24/2014
  • HACH BioTector 3500c Analyzer For TOC, TC, TIC and VOC Analysis

    In recent years, TOC analysis has become accepted in the industry as the standard method and the only reliable online method used to determine contamination in waters, to control processes, to prevent product losses and to minimize waste. It is especially important to monitor this parameter in applications such as condensate return water, boiler/feed water, etc. In boiler/feed water and in industrial steam generating systems, carbonic acid corrosion of condensate lines is often a serious problem. Depending on the application type, analysis of only one parameter (e.g., TC) is generally not sufficient to make any useful process decisions. Multiple-parameter analysis (TOC, TC, TIC, VOC etc.), as carried out in the Hach BioTector B3500c analyzer, is proven to be more useful and always superior to single-parameter analysis in the industry.

    Hach
    03/18/2014
  • Tips for Improving the Performance of Your Gravimetric Feeder

    Download the white paper to receive information on maximizing the performance of your gravimetric feeder. You will receive tips on how to choose and set up the right feeder for the specific material being fed in your process. Handling free flowing, adhesive, cohesive, aeratable, hygroscopic and pressure sensitive materials plus ways on where and how to properly install a gravimetric feeder are discussed.

    Schenck
    03/18/2014
  • Process Filtration Technology: Making Informed Decisions

    Solid-liquid separation is an instrumental part of chemical processing. To separate the solid particles, filter media made of textile or metallic materials and of composite materials are used as the basis for the filter cake. Often there will also be a washing process to improve the purity of the filter cake or to increase the yield of the liquid phase. Solid-liquid separation can be carried out in continuous or batch operation. There are many factors for selecting the right process filtration system for your specific application. This white paper reviews methods for identifying the right process filtration technology for your application and highlights case studies illustrating the methods discussed.

    02/25/2014
  • TOC Measurement in the Chemical Industry

    The most commonly used compound in the chemical industry is water – not only as a solvent in processing, but also as an energy carrier in the cooling or heating cycle. As vast amounts of water are needed, chemical industries are often located close to large bodies of flowing water. Water used as processing or cooling water is cleaned and subsequently led back to the river or stream. For environmental protection, these waters are subject to specific control and monitoring measures. As the total organic carbon (TOC) non-specifically detects all organic compounds, this parameter has proven to be invaluable here. This booklet introduces a variety of industry-specific applications, and how Shimadzu can provide TOC analyzers to meet specific chemical application needs.

    02/25/2014
  • Powder Processing Best Practices

    A material’s characteristics and how they may change during processing can affect HOW these materials are processed. Key factors affecting powders include aeration, moisture absorption, electrostatic charging to name a few. Many bulk solids are sensitive to heat and humidity. As these levels rise, either in the feeder system or via outside conditions, flow problems crop up. As the powder gains strength, jams and poor flow conditions begin to appear. Costly downtime and a loss of product are incurred while a search is made for a solution to the flow problems. In this Chemical Processing Powder eHandbook, we take a look at key factors affecting powders and today’s best practices for overcoming the processing of powders including:
     

    • Looking beyond the physical properties of particles and treating powder as a bulk entity
    • How scanners take volume to a new level - acoustics-based sensors can help accurately measure the volume of powders in vessels
    • How to determine a coating’s volatile content  - advancements in rapid loss-on-drying techniques significantly reduce testing time
    • Testing powder flow - advances in test methods help better predict flow behavior at elevated temperature and humidity levels

    Learn how to process powders efficiently. Download your copy of this Chemical Processing Powder eHandbook now.

    02/19/2014
21-40 of 200 < first | | | last >