Process Engineering White Papers

1-20 of 45 < first | prev | | last >
  • Special Report: Protect Process Control Systems

    In the decade before Stuxnet attacked process control systems in Iran, there were just five known supervisory control and data acquisition (SCADA) vulnerabilities for all control systems in the world, according to the U.S. Department of Homeland Security's Industrial Control Systems Cyber Emergency Response Team (ICS-CERT). In 2011, the year after Stuxnet, that vulnerability count jumped to more than 215. Last year, it reached 248. No surprise then that Chemical makers are increasingly focusing on protecting their process control systems from intrusion both from the inside and outside. In this Chemical Processing Special Report: Protect Process Control Systems, we take a look at:

    • How to better protect your control system - "Defense in depth" is crucial, and new and maturing technologies may help
    • Cyber Security Challenges - learn about countermeasures to protect control systems
    • Case Study: A vulnerability assessment reveals critical gaps in the security of a natural gas pipeline
    • How to mitigate security risks in legacy process control systems  - several steps can help protect against threats and extend the life of legacy equipment

    Learn how to secure your process control systems - and your plant. Download your copy of this Chemical Processing Special Report: Protect Process Control Systems now.

    10/29/2014
  • Choosing the Correct Emission Control Technology

    Increasingly stringent clean air standards and heightened concerns over greenhouse gas emissions are driving technology enhancements in the chemical processing industry. This white paper explains some of the abatement challenges this industry faces and demonstrates how many chemical processors are integrating newer, more efficient emission control technologies for the destruction of Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs).

    The paper also includes a case study, demonstrating how one Pure Terephthalic Acid (PTA) plant saved nearly one million dollars by upgrading to a newer thermal oxidizer technology.

    Anguil
    10/01/2014
  • The Perils of a DIY Distributed Control System

    The debate over the virtues of DCS vs. PLC has been ongoing since these two architectures came into existence 40 years ago. For certain industries, a distributed control system (DCS) provides substantially more value as the basis for automating the plant than a programmable logic controller (PLC)-based system. As functionality differences narrow and price points align, the debate over these virtues is getting more intense and the arguments for and against each system are getting more and more murky. This white paper discusses the “Top Ten” issues to consider when evaluating a DCS vs. building your own “DIY” distributed control system using a PLC-based architecture.

    Download white paper now.

    Honeywell
    07/15/2014
  • Tips On Controlling Dissolved Oxygen in a Wastewater Treatment Plant

    Breakdown of organic wastes entering a wastewater treatment plant is accomplished by using a biomass or blend of beneficial microscopic organisms, bacteria, and solids. This converts the nonsettleable solids (dissolved and colloidal matter) into settleable solids, carbon dioxide, water, and energy. This paper reviews the most common stages for measuring and controlling dissolved oxygen in a wastewater treatment plant.

    Hach
    05/13/2014
  • Chemical Processing Special Report: Secure plan(t)

    In the decade before Stuxnet attacked process control systems in Iran, there were just five known supervisory control and data acquisition (SCADA) vulnerabilities for all control systems in the world, according to the U.S. Department of Homeland Security’s Industrial Control Systems Cyber Emergency Response Team (ICS-CERT). In 2011, the year after Stuxnet, that vulnerability count jumped to more than 215. Last year, it reached 248 (Figure 1). No surprise then that Chemical makers are increasingly focusing on protecting their process control systems from intrusion both from the inside and outside. In this Chemical Processing Special Report: Secure plan(t), we take a look at:
    • How to better protect your control system - “Defense in depth” is crucial, and new and maturing technologies may help
    • Cyber Security Challenges – learn about countermeasures to protect control systems
    • Case Study: A vulnerability assessment reveals critical gaps in the security of a natural gas pipeline
    • How to mitigate security risks in legacy process control systems - several steps can help protect against threats and extend the life of legacy equipment
    Learn how to secure your process control systems – and your plant. Download your copy of this Chemical Processing Special Report: Secure plan(t) now.

    12/17/2013
  • Know Your TCO: A look at Medium Voltage VFDs

    Medium voltage VFDs are high cost, high consideration assets that greatly improve process control and efficiency in manufacturing facilities. It is vital that you and your company understand the TCO of this asset. Download the white paper for more information.

    Siemens
    10/29/2013
  • Special Report: Making the Most of Migration

    Perhaps the most critical challenge facing the automation industry is that of aging control systems at or near the end of their product lifecycles. A legacy control system can suffer from technical, functional or supply obsolescence. With a well-planned and executed control system migration, however, plants can improve availability and reliability, while increasing production flexibility. In this Chemical Processing Special Report: Making the Most of Migration, we take a look at: Obsolescence planning – addressing concerns and planning for a successful evolution strategy; Restoration Possibilities – how new tools and innovative methods support and breath new life into aging distributed control systems; DCS Migration; More! Download your copy of this Chemical Processing Special Report: Making the Most of Migration now!

    08/27/2013
  • Chemical Processing Special Report: Jacketed Heating

    Reactor temperature control typically is very important to product quality, production rate and operating costs whether a processor is employing continuous or batch reactors. Download your copy of this Chemical Processing Special Report: Jacketed Heating now!

    Pick Heaters
    03/19/2013
  • No More Risky Business With Virtual Patching

    Patching process control system software to remove security vulnerabilities is fraught with risk. System issues can be the result of installing a patch, but a system is also vulnerable without patching. Fortunately, virtual patching can improve the process and raise the system’s security at the same time.

    Honeywell
    09/21/2012
  • No More Tears for Control System Migration

    While upgrading process control systems is vital to maintaining a plant’s performance, the migration process often brings confusion and frustration for customers. See how Honeywell keeps control systems running at the best possible performance throughout the migration process and into the future.

    Honeywell
    08/29/2012
  • PRALCA’s Path to Modernization

    With an aging installed legacy Distributed Control System (DCS), the PRALCA petrochemical plant needed advanced control strategies to improve plant efficiency. Find out how a comprehensive migration solution extended the life of plant equipment and provided a cost-effective path forward to the latest automation technology.

    Honeywell
    08/29/2012
  • Expanding Production at FMC Lithium

    FMC Minera del Altiplano, a leader in the mining of lithium ores and brines, wanted to automate its production processes but lacked sufficient capacity to keep pace with continuous operational improvements. See how FMC expanded processing capacity while minimizing risks to critical plant information.

    Honeywell
    08/29/2012
  • Chemical Processing Special Report: Migration

    "Migration could be the biggest single issue facing automation end-users today," stresses a report from the ARC Advisory Group. ARC estimates that installed automation systems worth about $65 billion are reaching the end of their useful lives. Distributed control systems (DCSs) more than 20 years old will need replacement within the next ten years. In this Chemical Processing Special Report: Migration we cover:
    • Updating process control systems – understanding the challenges and missteps to avoid
    • Case Study: FMC Corporation – we look at the production processes, operational challenges and automated solutions this diversified global chemical company chose when migrating their DCS
    • Case Study: PRALCA – control systems migration for a petrochemicals facility
    • The business case for control systems migration - strategies for protecting investments, improving business results and reducing risks

    Honeywell
    08/27/2012
  • How Thermal Oxidation Can Increase the Sustainability of a Chemical Plant

    Installing new production processes, or upgrading and expanding existing lines today may also require upgrading your air pollution control system. This white paper specifically focuses on the advantages of using a single direct fire thermal oxidizer and provides a case study example.

    Durr
    09/20/2011
  • Be a Demand Planning Rock Star

    Rock stars get parties, limousines, fame, and dates with supermodels. What do Demand Planners get? Hopefully they may get fewer forecast errors. Learn how you can minimize production schedule changes, eliminate expedited transfers and shipments, reduce stock-outs, and more. Be a star at your company!

    CDC Software
    09/06/2011
  • Six Ways to Sustainability through Document & Business Processing

    Employ key "green" business technologies to reduce paper consumption, as well as comply with key regulations. Discover how Business Process Management and Document Management solutions can significantly slash material costs, while improving user productivity.

    CDC Software
    08/30/2010
  • Choosing the Right Emissions Control Option

    Determining the most economical option to control airborne emissions during chemical process operations presents several unique challenges. As with any add-on control system, the goal is to minimize the annualized total costs while maintaining proper operation. In this white paper, learn the different options that are available and which ones fit your process the best.

    Durr Systems Inc.
    10/19/2009
  • Benefits of State Based Control

    State Based Control is a plant automation control design based on the principle that all process facilities operate in recognized, definable Process States that represent a variety of normal and abnormal conditions of the process. State Based Control, implemented with the latest developments in object-based technologies, delivers direct benefits to its adopters in a variety of Operational Excellence categories. It results in productivity increases, higher asset utilization of both people and process, automated responses and recovery for abnormal conditions and provides an environment for knowledge capture directly into the control design.

    David Huffman, ABB Inc.
    05/14/2009
  • Special Report -- Control With Flow

    With changes in temperature, pressure, density and viscosity all affecting volumetric flowmeter measurement, how can continuous processors accurately measure the flow of fluids? Download this Special Report to find out how Coriolis flowmeters provide a direct mass measurement that is unaffected by changing process fluid characteristics – improving both accuracy and optimizing operations at your plant.

    Micro Motion
    03/30/2009
1-20 of 45 < first | prev | | last >