More than 25% of maintenance done today is unnecessary and can introduce additional failure risks. Developing and implementing predictive maintenance strategies and practices can lead to improved safety and reduced operating costs. In this Chemical Processing eHandbook, we take a look at strategies and solutions for overcoming predictive maintenance challenges including:
Asset management software - identifying the most relevant and accurate data on which to build maintenance and repair strategies
The importance of maintenance on smaller component - using gauges as early warning devices can improve uptime, safety and profits
Uncovering important insights from your data and the use of statistics such as regression analysis for emulating pump curves or control valves
Download your copy of this Chemical Processing Predictive Maintenance eHandbook now.
Energy consumption remains one of the largest controllable costs in oil refineries. Heat exchanger fouling can have a significant impact on energy efficiency and production loss. Asphaltene Precipitation is caused when refiners blend incompatible crudes. This is a major source of fouling and leads to performance limitations within days. Heat exchanger fouling is a major challenge for refinery operations. With the increase in crude blending from opportunity crudes such as tight oil, the traditional “manual” monitoring approach may no longer be effective. This White Paper discusses how on-line monitoring and analysis can enable refineries to:
Better Understand Accelerated Fouling Due to Crude Incompatibilities
Learn How to Use Online Monitoring to Detect Fouling
Corrosion, leak detection and mitigation, flow pressure and volume are all factors that maintenance managers and other decision makers need to contend with as they manage flow at their chemical processing plants. In this Chemical Processing Flow eHandbook, we delve in to solutions and strategies for managing these challenges including:
Leak management - treat them as calls for action against the underlying problem
VFDs for centrifugal pumps - such drives may provide energy savings and avoid operating problems
Dealing with corrosion - piping made of high-performance plastic provides unmatched performance and longevity
Ceramic in electromagnetic flow meters - material used for measuring tubes offers high performance, longevity and a host of other benefits
Learn more about these best flow practices. Download your copy of this Chemical Processing Flow eHandbook now.
Tank cleaning has always been viewed as a necessary evil for manufacturers. During the cleaning process, a significant amount of resources (time, chemicals, water, electric and labor) is required between batches to ensure a reliable, uncontaminated, quality batch is produced. Although these repeating expenditures have a significant effect on the bottom line, many chemical manufacturers continue to rely on outdated processing for cleaning, not realizing the potential opportunity for substantial cost reductions and revenue recovery through CIP optimization.This whitepaper includes specific case studies on the benefits of rotary impingement and CIP optimization vs. the standard tank cleaning processes. These benefits include drastic savings in time and water usage as well as employee safety.
This concise, compelling overview of best practices in purchasing and maintaining ethylene valve packages is an essential read for industry professionals. The white paper will tell you how to: 1) Select the right seats and seals; 2) Select the right coating materials; 3) Know the quality of the valves you're buying; 4) Find a trusted single resource for your valve package purchases; 5) Keep up with required maintenance.
Bristol-Myers Squibb manually monitored dissolved oxygen (DO) periodically and ran aeration blowers more than necessary to guard against variable loading rates. After upgrading the system to use online DO monitoring operators now have continuous DO readings in the aeration tanks, substantially reducing energy and maintenance costs.
Automated water jetting removes hardened deposits from tanks and reactors quickly and thoroughly, saving hours of downtime and getting tanks back into service sooner. A new white paper explains high-pressure water jetting, introduces typical equipment, and compares the process with other methods.
Reliability programs are now standard business practice in companies that rely heavily on machines, equipment and other physical assets. But, in today’s lean economy, companies have fewer resources than ever to manage and maintain these assets. Plants face challenges in identifying new and cost-effective ways to ensure their assets are performing and that they are managing to minimize operational risks. In this Chemical Processing Reliability/Asset Management eHandbook we take a look at proactive approaches for improving reliability and maintenance in today’s processing plant including:
• Equipment rotation: identify damaged and worn components before they cause problems • Backflush strategies: flow reversal can remove fiber buildup in heat exchangers • Advanced Reliability Management: key steps for leveraging limited resources and critical assets • Predictive Maintenance: detailed analysis of maintenance records can further improve equipment reliability • More!
As many chemical processors know, processing powders can be tricky. Powder properties can be affected if the materials are stored for long periods. Powders can be compressed, vibrated, aerated and exposed to moisture. And specific processes like granulation, blending, drying, milling, lubricating and compression put requirements on how powders can be handled. In this Chemical Processing Powder eHandbook, we take a look at how to effectively process powder including:
Compression dryers – the case for choosing a solution that produces optimal air quality and low energy consumption
GHS – understanding the requirements and what it means to chemicals processors
Predicting powder flow behavior
Vibratory screen cleaning methods
Fine powder flushing - eliminating a common bin-afflicting problem caused by trapped air
Tubular Drag Conveying Technology – an alternative to pneumatic conveying
White paper provides descriptions and the cleaning efficiency levels of the most commonly used tank cleaning practices, including specific case studies on the cost-saving benefits of rotary impingement tank cleaning and CIP optimization vs. standard tank cleaning processes.
Combustible dust fires happen in plants everyday. This white paper helps manufacturers learn more about combustible dust hazards and ways to handle combustible dust in your manufacturing plant in order to comply with OSHA's NEP. Learn more about choosing the right cleaning tools for your facility.
Heat transfer and other process fluids -- from mineral oils to synthetic and organic-based formulas -- are the lifeblood of many critical operations within chemical and the process industries. Their condition reveals critical details about the health of the entire process itself, and that of the components of the system and their interoperation. Register for access to two special E-Books, which come in an interactive PDF format with links to additional web resources.
For the latest strategies on how to set an effective reliability program, download this Special Report: Cost-Justify Your Reliability Initiatives.
In this report youll find:
Predictive tools and technologies for enhanced equipment reliability
The four things a plant manager can do that maximize reliability
Critical equipment for an effective maintenance program
Specific case studies on the benefits of rotary impingement and CIP optimization vs. the standard tank cleaning processes. Benefits include: increased revenue and production with drastic reductions of operating costs pertaining to tank cleaning.
During many chemical operations, cake washing is required since no filter system can remove all of the mother liquor by pressure or vacuum dewatering only. The topic of how to most efficiently wash the cake is important. This article introduces pragmatism into cake washing theory and will help engineers during their decision-making processes.
For years chemicals makers have tracked the health of key equipment yet they still grapple with unplanned outages that can significantly impact financial performance through lost production and extra repair costs. In this Special Report, we'll explore underlying condition monitoring challenges and introduce the concept of condition management -- an enhanced approach that helps companies reap the full benefit from their condition monitoring investments; we'll also discuss how CMMS tools can help to provide a clear understanding of maintenance operations performance as well as provide some guidance on what you can expect from a CMMS vendor. Lastly, listen to the lively discussion between Chemical Processing's Senior Digital Editor,Traci Purdum, and Edgewater Fullscope's Senior Vice President, Russell Smith, as they converse on how ERP can help manage the supply chain.
Over the past decade, cartridge-style dust collectors have overtaken baghouses as the preferred technology for dust collection in the chemical processing industry. Combining high efficiency filtration with compact size and reduced pressure drop, a high efficiency cartridge dust collector will in most cases be the system of choice.
Choosing the best cartridge collection system for a given application, however, involves research and attention to detail. This article will review four key areas of investigation. By reviewing these topics with a knowledgeable equipment supplier and knowing the right questions to ask, chemical manufacturing professionals will be better equipped to make informed dust collection decisions. Download this whitepaper now.
One of the challenges that companies have faced in implementation of continuous monitoring systems is the lack of infrastructure for sensing and data collection. The devices to be monitored are widely dispersed throughout plants with large areas, have no existing power or signal transmitting wire infrastructure, so the capital costs associated with the power and communication services have historically prohibited continuous monitoring. This white paper will unearth best practices to prevent product loss, reduce emissions and ensure ROI.
An exciting trend in the world of CMMS is the increasing sophistication of condition-based maintenance (CBM) features and functions vendors offer and maintenance professionals actually use. This Special Report covers:
* Six steps to condition-based maintenance
* Bolster your condition monitoring toolbox
* Protect your condition-monitoring program from the recession guillotine
* Go beyond condition monitoring
Heat exchanger efficiency is a critical factor in processing productivity, and tube bundles must be kept clear of deposits to maintain that efficiency. Automated high-pressure water jetting systems, with flexible or rigid lances, remove deposits 75% to 90% faster than manual methods and are more operator-friendly.