Organic cellulose and biomass filtration, washing and drying is very unpredictable and even minor differences in feedstock,washing or cake moisture requirements can require a different process solution.
Both vacuum and pressure operations can provide equivalvent process results.
On-site testing is required to determine the optimum filter selection.
This article discusses the choice of thin-cake (2 25 mm) separation technologies and their benefits to optimizing the effectiveness of the production process. The paper continues with a
discussion of clean-in-place operations to meet current Good Manufacturing Practices (cGMP) guidelines including riboflavin test and validations.
EPA tracks emissions of six principal air pollutants - carbon monoxide, lead, nitrogen oxides, particulate matter, sulfur dioxide, and volatile organic compounds. All have decreased significantly since passage of the Clean Air Act in 1970 - except for nitrogen oxides.
Advanced diagnostics, some of which are available today, will go beyond alarming transmitter
failures to actually predict impending failures in the complete measurement system. This will
significantly reduce unscheduled shutdowns, and also reduce the risk of onscale failure.
Processors have long recognized the importance of tank and reactor cleaning to product quality. This NLB white paper discusses cleaning methods and the significant implications your choice can have on productivity, safety and profitability.
This 26-page white paper from Monitor Technologies discusses the difficulties in measuring bulk solids and powders in bins, silos and hoppers. Download this document to learn which technologies are out there that can make this job easier.
The convergence of innovative technologies using open industry standards simplifies communication between software and technology. Now you can centralize key performance diagnostics, push critical information to the workforce, and problems can be solved from anywhere.
Maintaining peak performance of organic heat transfer fluids can require removal of dirt and pipe scale, oxidation, thermal degradation, and process contamination. This paper describes the appropriate cleaning techniques for dealing with solids; sludge, high-viscosity fluid and residues; process contamination; and hard coke.