Economic growth, industrialization and population growth are driving the increasing demand for water, while factors such as climate change, pollution and regulation are affecting the supply and costs related to water.” The chemical industry, being highly water intensive, certainly is exposed to water-related risks. Any efforts to manage these risks and capitalize on opportunities begin with the measurement and appreciation of how water may impact business, followed by the development of strategies to protect the business both now and in the future. In this Chemical Processing Special Report we take a look at water challenges and potential solutions for chemical processors including:
Water-related risks and opportunities
How chemical makers strive to cut water consumption and improve treatment
During industrial manufacturing, many companies use a wide variety of chemicals from methanol, acetone and benzene to foodstuffs like wine and edible oils stored in large tanks at different points in the manufacturing process. In a technique called “chemical tank blanketing,” or “padding” nitrogen is commonly applied to protect chemicals stored in tanks against contamination, degradation or chemical change as well as to prevent fire or explosions. This white paper first discusses blanketing basics and benefits. It reviews considerations for tank blanketing systems and discusses a newer approach, which is typically more cost effective for most applications, is that of generating nitrogen on-demand in the plant itself.
Chemical Processing Special Report: How to Succeed with VFDs
Medium voltage variable frequency drives (VFDs) are often the best choice to capitalize on opportunities to significantly reduce the operating and maintenance costs associated with relatively large rotating equipment. Even a seemingly modest energy savings of a few percent of the operating load can translate into significant energy savings. In this special report we take a look at how to make the most of VFDs: how optimum performance depends upon proper installation and control; how controlling the speed of VFDs can help eliminate waste and promote efficiency, reliability and quality and; considerations for changing drive speed over pumps. Download now.
HACH BioTector 3500c Analyzer For TOC, TC, TIC and VOC Analysis
In recent years, TOC analysis has become accepted in the industry as the standard method and the only reliable online method used to determine contamination in waters, to control processes, to prevent product losses and to minimize waste. It is especially important to monitor this parameter in applications such as condensate return water, boiler/feed water, etc. In boiler/feed water and in industrial steam generating systems, carbonic acid corrosion of condensate lines is often a serious problem. Depending on the application type, analysis of only one parameter (e.g., TC) is generally not sufficient to make any useful process decisions. Multiple-parameter analysis (TOC, TC, TIC, VOC etc.), as carried out in the Hach BioTector B3500c analyzer, is proven to be more useful and always superior to single-parameter analysis in the industry.
Chemical Processing Special Report: Secure plan(t)
In the decade before Stuxnet attacked process control systems in Iran, there were just five known supervisory control and data acquisition (SCADA) vulnerabilities for all control systems in the world, according to the U.S. Department of Homeland Security’s Industrial Control Systems Cyber Emergency Response Team (ICS-CERT). In 2011, the year after Stuxnet, that vulnerability count jumped to more than 215. Last year, it reached 248 (Figure 1). No surprise then that Chemical makers are increasingly focusing on protecting their process control systems from intrusion both from the inside and outside. In this Chemical Processing Special Report: Secure plan(t), we take a look at:
How to better protect your control system - “Defense in depth” is crucial, and new and maturing technologies may help
Cyber Security Challenges – learn about countermeasures to protect control systems
Case Study: A vulnerability assessment reveals critical gaps in the security of a natural gas pipeline
How to mitigate security risks in legacy process control systems - several steps can help protect against threats and extend the life of legacy equipment
Learn how to secure your process control systems – and your plant. Download your copy of this Chemical Processing Special Report: Secure plan(t) now.
Five Keys to Avoiding Ethylene Valve Failures
This concise, compelling overview of best practices in purchasing and maintaining ethylene valve packages is an essential read for industry professionals. The white paper will tell you how to: 1) Select the right seats and seals; 2) Select the right coating materials; 3) Know the quality of the valves you're buying; 4) Find a trusted single resource for your valve package purchases; 5) Keep up with required maintenance.
Chemical Processing’s Process Safety eHandbook: Tips for Safer Processing
Major accidents with multiple fatalities continue to occur worldwide in theprocess industries, causing distress to those involved and massive costs to companies. Almost daily, facilities in the process industries face a number of specific major accident hazard scenarios depending upon the nature of the substances they handle and their processing activities. These are caused by known initiating events such as failure of hardware or control systems, or errors by operating or maintenance staff. In this Chemical Processing Process Safety eHandbook, we provide tips for safer processing including:
>> The role of senior management including six important steps senior management should take to insure safer processing
>> Process safety documentation – strategies for ensuring that your documentation is up-to-date and readily accessible
7 Applications You Didn’t Know Were Compatible with Microwave
Microwave energy in chemical processing has really come of age over the past few years. Many companies are experiencing the benefits that microwave offers over conventional drying technologies. Other functions include: sterilization, pasteurization, cooking, tempering, dehydration and heating.
While you may have guessed a few of the applications we’re profiling, or may even work with them yourself, we hope at least one or two applications off our list will catch your eye and perhaps start you thinking.
• Analytical Chemistry
• Treatment of Biomass & Biosolids
• Powder Processing
Animal Blood Plasma
• Pyrolysis for Recycling & Waste-to-Energy
Plastics and Rubber
• Petro Chemicals
Building Productivity Automating Time and Attendance in Manufacturing
Manufacturing organizations face a critical balancing act – achieving the highest levels of efficiency, while ensuring that they are not over or under supplying the marketplace.
This need to be flexible and efficient requires exceptional visibility into all of the factors that influence productivity and output. This white paper will look at the challenges manufacturing organizations face and how automation of key workforce management processes helps manufacturers not only improve efficiency, but also better manage labor spend, reduce compliance risk and improve productivity.
Whitepaper: On-Line Instrumentation Helps Lower DAF System Costs
Many industrial plants use dissolved air flotation to remove fats, oils and grease, and suspended solids from wastewater. Chemical additions are often kept higher than necessary to account for variations in influent water quality that are characteristic of industrial facilities. Continuous monitor
Chemical Processing Special Report: Jacketed Heating
Reactor temperature control typically is very important to product quality, production rate and operating costs whether a processor is employing continuous or batch reactors.
Download your copy of this Chemical Processing Special Report: Jacketed Heating now!
Recovering Precious Metals from Spent Chemical Processing Catalysts
Most chemical processors use precious-metal-bearing catalysts for facilitating and/or speeding chemical reactions. These catalysts are typically composed of platinum group metals (PGMs). After a number of process cycles the catalysts lose their efficacy and must be replaced with fresh catalysts. Spent catalysts are sent to a precious-metals refiner for recovery and refining of the valuable PGMs remaining in this material. Selecting—and working with—a precious-metals refiner is critical to ensure highest possible returns and peace of mind with regard to environmental concerns. Download and read this 22-page white paper to learn more about recovering precious metals from spent catalysts.
Sabin Metal Corp.
Surviving the CFATS Site Security Plan – Tips for Inspection and Resubmission
As the Department of Homeland Security (DHS) moves forward with the Chemical Facility Anti-Terrorism Standards (CFATS), the program continues to evolve. This white paper describes the ongoing CFATS compliance process (which is a combination of technical, procedural, and personnel security) and also provides insight regarding how to develop or revise a comprehensive Site Security Plan (SSP) and prepare for a CFATS Authorization Inspection (AI). Recommendations are relevant to SSPs for all tier levels and should be considered for a facility's initial SSP submission and/or any required SSP resubmission. Download this white paper now: Tips for Inspection and Resubmission.
Tyco Integrated Security
Preventing Phenolic Resin Reactor Accidents
An easy to use generalized vent sizing formula is illustrated to be consistent with large scale industry experience and dedicated phenolic runaway reaction tests performed by Fauske & Associates, LLC. The formula also clearly explains the 1999 catastrophic failure of a phenol-formaldehyde reactor resulting from a grossly undersized relief system.
Carbon Adsorption & Reactivation: Turning Obligation into Opportunity in the Chemical Process Industry
Chemical, petrochemical, and oil-reﬁning plants are process-intensive operations with regulatory requirements to protect the surrounding water and air from the effects of industrial pollution. This paper reviews activated carbon adsorption, the reactivation process, liquid phase and vapor phase adsorption design guidelines, and typical applications of the technology in industrial/environmental treatment.
This practical guide and checklist ties the unique operations of chemical manufacturers to specific ERP functionality and architecture. Topics include:
Variability and Quality
Product Accountability and Costing
Don't settle for a "one size fits all" ERP solution. With the "right fit" ERP solution, you will be able to streamline operations, reduce costs and scale production, while complying with federal regulations -- all with minimum customization.
You're Agile or You're Dead
Market activity shows that manufacturing in North America and Western Europe won't die soon, but some manufacturers will. The future belongs to the agile, and this white paper is your survival guide. Learn how to implement change, achieve real sustainability and boost profitability for the long run.
Reducing Water Consumption in Compressed Air Systems
Compressed air systems are sometimes called the "4th Utility" due to their presence in almost all industrial processes and facilities. As US water consumption continues to increase, compressed air systems provide an opportunity for energy managers to reduce associated cooling water consumption and costs. In this white paper, we focus on the opportunity to reduce the water consumption of compressed air systems. Understanding the costs and the alternative types of cooling systems is an important first step. This white paper provides background on US water consumption in both the public and industrial sectors; it provides detail on industrial water consumption -- including industrial cooling water -- and its associated costs; it also details six different types of cooling systems available.
Maritime Transportation Security Act - Tips & Updates
Remain informed about adjustments to MTSA and learn how the program continues to evolve. This paper provides regulatory updates on the current state of MTSA and information about Transportation Worker Identification Credential (TWIC). Find out about new challenges, such as harmonization with Chemical Facility Anti-Terrorism Standards (CFATS). The paper also covers the current discussion among industry and government officials regarding the differences associated with the MTSA and CFATS programs, including ways to coordinate chemical security regulations. Learn about TWIC reader pilot program updates, as well as practical tips for compliance. Download MTSA Tips & Updates Paper