Process Engineering White Papers

21-35 of 35 < first | | next | last >
  • Removing Liquid From Gas

    Liquid entrainment in a gas stream can be a disturbance in many industrial processes. In natural-gas processing, higher-order hydrocarbons, water or impurities have to be separated from the main methane stream. Upstream of gas compressors, droplets that can damage the impellers, have to be removed. With the recently acquired Knitmesh technology and the strategic alliance with Shell Global Solutions, Sulzer Chemtech can supply a broad portfolio of advanced, tailor-made systems for gas/liquid separation to customers in all industries.

    Sulzer Chemtech USA
    09/17/2007
  • The fan repair and rebuild experts

    Before you order brand-new air-moving equipment to replace your worn, corroded, unbalanced equipment, consider the potential benefits of repairing or rebuilding that equipment.

    Robinson Industries Inc.
    01/01/2007
  • Clean-in-place operation for thin-cake filtration technologies

    This article discusses the choice of thin-cake (2 – 25 mm) separation technologies and their benefits to optimizing the effectiveness of the production process. The paper continues with a discussion of clean-in-place operations to meet current Good Manufacturing Practices (cGMP) guidelines including riboflavin test and validations.

    BHS-Filtration
    04/20/2006
  • Clean Compressed Air

    Good air preparation should consider the energy consumption of the system and air treatment equipment.

    Norgren
    11/27/2005
  • Level measurement of bulk solids and powders

    This 26-page white paper from Monitor Technologies discusses the difficulties in measuring bulk solids and powders in bins, silos and hoppers.  Download this document to learn which technologies are out there that can make this job easier.

    Monitor Technologies
    01/03/2005
  • How to Choose a Vacuum Dryer

    Vacuum drying can be applied in a range of processes in several industries, including chemical, pharmaceutical, food, plastics, and metal powders. This article first discusses vacuum drying benefits and limitations and dryer components and operation, then explains the differences between tumble and agitated vacuum dryers and how you can select one for your application.

    11/19/2004
  • Nonwoven Fabric Filtration Media

    This 6-page primer explains the various forms of nonwoven media, their special characteristics, as well as filter configurations and function. It discusses advantages and disadvantages, and application trends.

    Edward C. Gregor
    10/15/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Design Guidelines for Distillation Columns in Fouling Service

    This 33-page paper discusses the wide variety of factors that can cause fouling and the impact of this fouling on the performance of a distillation column. It then provides details on practical methods for mitigating fouling, including equipment design, surface treatment, and use of additives.

    10/15/2004
  • Design the Heat-Transfer-System Expansion Tank Right

    The design of the expansion tank plays an important role in the successful operation of a heat transfer system using organic fluids. It can contribute to longer fluid life and lower maintenance. This paper describes the proper sizing, piping and valving, instrumenting, and inerting of the tank.

    Solutia
    10/11/2004
21-35 of 35 < first | | next | last >