Process Engineering White Papers

101-120 of 128 < first | | | last >
  • Design Tips for Selecting Sensing Probes

    This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.

    Delta Controls
    07/05/2005
  • Taking Toxics Out of the Air

    This 34-page PDF white paper discusses the technology and performance-based standards implemented by the EPA during the last 10 years and how they will assist in removing harmful toxins from the air.

    Enivironmental Protection Agency
    06/28/2005
  • How to improve productivity and stay out of confined spaces

    Processors have long recognized the importance of tank and reactor cleaning to product quality. This NLB white paper discusses cleaning methods and the significant implications your choice can have on productivity, safety and profitability.

    NLB
    06/07/2005
  • Security vulnerability assessment revealed

    Plant security is a key priority at many plants. This 10-page paper provides background what the methodology for a plant vulnerability analysis involves. It covers topics such as how to get started, available tools, and risk assessment.

    ioMosiac
    04/21/2005
  • Methods of determining safety integrity level (SIL)

    This 17-page whitepaper discusses the application of two popular methods of determining SIL requirements – risk graph methods and layer of protection analysis (LOPA) – to process industry installations.

    4-sight consulting
    04/19/2005
  • Technical handbook from Magnetrol

    This technical handbook from Magnetrol gives important conversions, chemical properties, equivalents and pipe data.

    Magnetrol
    04/04/2005
  • Understanding alarm management

    This nine-page PDF whitepaper discusses the pitfalls of alarm management and how mistakes in the past have been quite costly. It then addresses these mistakes and gives an overview of proper alarm management.

    4-sight Consulting
    02/10/2005
  • How to control a process with long dead time

    A process with a large dead time presents a special challenge for a controller --  any controller. This short paper explains how to get the best control of large dead time processes.

    ExperTune
    01/11/2005
  • Theory and practice of pH measurement

    This 43-page guide covers the basic mechanism of pH measurement, the structure of the sensor and its fundamental limitations, and also provides installation, maintenance and troubleshooting guidance.

    Rosemount Analytical
    01/04/2005
  • Level measurement of bulk solids and powders

    This 26-page white paper from Monitor Technologies discusses the difficulties in measuring bulk solids and powders in bins, silos and hoppers.  Download this document to learn which technologies are out there that can make this job easier.

    Monitor Technologies
    01/03/2005
  • Tracing the accuracy of calibration gases

    Calibrating your instruments using specialty gas will only yield results as accurate as your gas mixture. This three-page white paper discusses analytic traceability and how it relates to gas mixture accuracy.

    12/29/2004
  • Security Vulnerability Analysis

    Plant security is a key priority at many plants. This 10-page paper provides background what the methodology for a plant vulnerability analysis involves. It covers topics such as how to get started, available tools, and risk assessment.

    12/02/2004
  • Ziegler-Nichols Tuning Rules And Limitations

    The standard reference for PID tuning seems to be the Ziegler-Nichols tuning rules developed in 1942 on a pneumatic controller. Here is how to tune a controller using these rules.

    ExperTune
    11/19/2004
  • RFID in Manufacturing

    In the wake of a Wal-Mart mandate requiring top suppliers to put Radio Frequency Indentification (RFID) tags on cases and pallets of consumer goods by January 2005, Rockwell Automation offers this white paper to help educate manufacturers on how to maximize their investment in RFID technology throughout their enterprise and supply chains. The paper provides a practical guide to extracting measurable value from RFID implementations in plant and warehousing operations.

    10/21/2004
  • Layered Security in Plant Control Environments

    Process control vendors are migrating plant control technologies to more open network and operating environments. This White Paper explains how layered security can be accomplished by adopting a "best practices" model, developing and implementing an access control plan, and compartmentalizing the network.

    Ensuren Corp.
    10/15/2004
101-120 of 128 < first | | | last >