Chemical and Pharmaceutical Sight Glass Application Handbook
20-page Sight Glass Application Handbook is a convenient reference for experienced engineers and a great primer for those new to sight glass selection. It offers a full overview of sight glasses for chemical processes, including types of glass, construction, lighting, installation and maintenance.
Spray Gas Quench Design Considerations
The use of spray nozzles to rapidly cool or quench gas streams is an essential application in many industrial processes, such as chemical reaction vessels, incineration, and power plant absorber gas inlet. An optimized spray quench design requires engineering analysis of the operating environment, spray nozzle performance and process reliability.
This technical paper describes the design considerations for spray gas quench systems such as nozzle selection, process control, system configuration and reliability. Application of this knowledge can result in a gas quench system that operates efficiently and reliably with reduced vessel size, reduced atomization energy consumption, and minimized downtime, to achieve capital and operational cost savings for your process.
Special Report -- Control With Flow
With changes in temperature, pressure, density and viscosity all affecting volumetric flowmeter measurement, how can continuous processors accurately measure the flow of fluids? Download this Special Report to find out how Coriolis flowmeters provide a direct mass measurement that is unaffected by changing process fluid characteristics improving both accuracy and optimizing operations at your plant.
Closed System Technology Drives the Trend Toward Safer, More Cost-Efficient Chemical Dispensing
In dozens of industries and in millions of applications around the world, dangerous chemicals are transferred from their original shipping containers into smaller jugs or buckets or applied to other end-use processes. Historically, the predominant dispensing method in many of these applications has been through an open system where the liquid is poured out of the container. With a poured system, the container is often flipped on its side and the liquid is poured into a secondary container.
The user then just carries the bucket to wherever it needs to go. A mental image of this technique quickly reveals its potential dangers and inefficiencies.
Colder Products Company
Case Study: How can manufacturers ensure they are choosing the right heat transfer fluid
Reliable heat transfer fluids are vital to the ability of manufacturers to operate efficiently and productively. However, some heat transfer fluids can degrade over time, resulting in deteriorating performance, impacting operating costs and product quality. With these possible consequences, how can manufacturers ensure they are choosing the right heat transfer fluid, and prevent these problems from occurring?
Design Considerations for High Liquid Rate Tray Applications
Except for a few odd services, high liquid rate applications are typically the domain of either trays or random packings. Aside from the distributors, random packing designs are rather straightforward with the designer choosing the proper size to accommodate the fluid flow rates and achieve the desired efficiency. Trays, on the other hand, have a large variety of adjustable parameters and can be especially complex, especially when designed for high liquid rate applications.
Sulzer Chemtech USA, Inc.
Pitfalls of pump piping
This white paper goes over the three major problems associated with poor pump piping and provides five rules to follow in order to avoid future pitfalls.
Ross Mackay Associates Ltd.
Oxygen in cell culture/venting ozonated vessels
This white paper outlines trends and opportunities for gasket standardization in processing plants ... including the potential for more reliable sealing, cost savings, inventory reduction, easier installation and safety practices. Steps are outlined for achieving success in gasket standardization across steel, glass-lined and FRP piping.
Design Tips for Sensing Probes
This application note from Delta Controls outlines selection and installation criteria for using admittance probes to monitor the level of powders, liquids and other materials. Dielectric constants of more than 200 materials are included.
Accurate liquid phase density on aerated liquids
This white paper discusses SONAR-based, clamp-on gas volume fraction meters which recently have been introduced to the industry that provide an accurate, real time, measurement of entrained gases. Coupling entrained gas volume fraction monitor with most types of process density meters, enables accurate determination of liquid and the liquid-solid components of aerated mixtures.
Electro-hydraulic system design: Making the right system choices
Designers who understand and can take advantage of the differences between fluid power and traditional electromechanical power can build machines that produce higher quality output with lower lifecycle costs. This white paper suggests that care must be taken, however, in selecting and sizing the hydraulic system elements and in tuning the motion controller for optimal performance.
Delta Computer Systems
Technology expands flowmeter capabilities, reduces costs
Capacitance-type magnetic flowmeters have traditionally offered the advantage of having non-wetted electrodes and the ability to measure low conductivity fluids. However, they suffered from a sensitivity to flow noise and zero instability. Innovative technology overcomes these limitations and drives magnetic flowmeters into new areas of application, while reducing installed costs.
Bearing isolators 101
A bearing isolator is a non-contact, non-wearing, permanent bearing protection device. It has a rotor and a stator, and the two are unitized, so that they dont separate from one another while in use. Typically, the rotor turns with a rotating shaft, while the stator is pressed into a bearing housing. The two components interact to keep contamination out of the bearing enclosure and the lubricant in.